A HACCP plan for a small business is the same twelve steps as for a large one, done for fewer products on a shorter line. The guidelines published on FDA's site set them out: five preliminary tasks, which describe your product and process, and then the seven principles, which find the hazards and say how you control them. What changes with size is the volume, not the method. A maker with one product, one kitchen and eight process steps can have a plan of a few pages with one or two critical control points. It still has to be yours: a template with another company's product in it controls nothing. Below are the twelve steps with what each looks like in a small business, what the plan rests on, and a worksheet. Whether the law requires you to have one is a separate question, covered in who needs a HACCP plan.
The short version
- Five preliminary tasks: team, product, intended use, flow diagram, check the diagram.
- Seven principles: hazard analysis, critical control points, limits, monitoring, corrective actions, verification, records.
- One plan for one product or one group of products made the same way.
- Most of what keeps food safe day to day is in prerequisite programs, not in the plan.
- Few critical control points, each with a limit you can measure.
- If nobody fills in the logs, there's no plan.
- TaroStack keeps the batch and lot records a plan's logs point to. More below.
Before the plan: prerequisite programs
The guidelines put this first. Producing safe food, they say, "requires that the HACCP system be built upon a solid foundation of prerequisite programs." Their examples include supplier control, written specifications, equipment maintenance and calibration, and cleaning and sanitation. These aren't critical control points. They're the conditions the plan assumes. A small business that tries to put all of them in the HACCP plan ends up with a plan nobody can run. See prerequisite programs for HACCP and GMP checklist.
The five preliminary tasks
| Task | In a small business |
|---|---|
| 1. Assemble the HACCP team | The people who know the product and the process. That may be two of you, with outside help where your knowledge runs out |
| 2. Describe the food and its distribution | A paragraph: what it is, how it's packed and stored, how it reaches the customer |
| 3. Describe the intended use and consumers | Ready to eat, or cooked first? The general public, or a group at more risk? |
| 4. Develop a flow diagram | Every step from receiving to shipping, as boxes and arrows on one page |
| 5. Verify the flow diagram | Walk the floor with it. Correct what you find |
The guidelines say the team "should also include local personnel who are involved in the operation as they are more familiar with the variability and limitations of the operation." In a small business that's an advantage: the person writing the plan is often the person at the kettle. A drawn example is in HACCP flow diagram example.
The seven principles
| Principle | In a small business |
|---|---|
| 1. Conduct a hazard analysis | For each step in the diagram: what could go wrong, is it likely and serious enough to need control, and what controls it |
| 2. Determine the critical control points | The steps where control is essential. Examples: a cook step, an acidity target, a metal check |
| 3. Establish critical limits | A number for each, from the rule or a validated process: a temperature and time, a pH, a setting |
| 4. Establish monitoring procedures | What is measured, how, how often, by whom |
| 5. Establish corrective actions | What happens to the product, and to the process, when a limit is missed |
| 6. Establish verification procedures | Someone reviews the logs. The thermometer or pH meter gets checked |
| 7. Establish record-keeping and documentation procedures | The logs, the plan itself, and where both are kept |
The hazard analysis is the long part, and it's the part a template can't do for you. A blank is in hazard analysis template. The result of principles 2 to 7 fits on one page: see HACCP plan summary.
Keeping it small
- Group products. Three granolas made on the same line with the same steps can share one plan, if their hazards are the same. A product with a different allergen or a different kill step needs its own look.
- Be honest about critical control points. The guidelines define one as a step where control "is essential". If a step is controlled well by a prerequisite program, it isn't one.
- Take limits from somewhere. A critical limit comes from the regulation that covers your product, published guidance, or a process authority. See critical limits for CCPs.
- Make the log part of the job. One line a batch, at the step, by the person doing it.
- Review it yearly, and whenever the recipe, the equipment or a supplier changes: see change control log example.
If a rule does apply to you, it sets the details. For meat and poultry, 9 CFR 417.2 lists what a plan must contain. The whole process, step by step, is in how to write a HACCP plan, and a worked small example in HACCP plan for a small cafe.
Get the worksheet
Download the HACCP worksheet for a small business. One sheet and a read-me: the twelve steps, what the guidelines call each, what a small business writes for it, and a column for done. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
A small plan is easy to write and easy to stop running. The cook log lives on a clipboard that's full by Wednesday. A corrective action says "hold the affected product", and by the time anyone reads the log the product has shipped. The plan is right. The records that prove it's followed, and the link from a bad reading to the exact bags it touched, are where a small business comes unstuck.
How TaroStack does it
TaroStack keeps the production records a plan's logs point to.
Each batch is a lot, with when it was made and the ingredient lots it used, noted automatically.
Batch records carry your own checklist fields, so the check at your critical control point is recorded with the batch it belongs to.
A lot can be put on hold while a corrective action is decided.
What ships is recorded by lot, so product from a bad batch can be found.
Timed, logged traceability drills, for the verification column.
| The plan says | Clipboard | In TaroStack |
|---|---|---|
| Record the check for each batch | A sheet, if there's room | A field on the batch |
| Hold affected product | Find it | Hold the lot |
| Know where it went | Invoices | The recall report |
| Show the records for a lot | Binders | With the lot |
TaroStack doesn't write your HACCP plan, set critical limits or take temperatures. It keeps the records. Lots, batches, holds and the recall report are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
