A beef cut sheet is the form that tells the processor how to turn a whole, half or quarter beef into packages for one customer's freezer. South Dakota State University Extension describes it plainly: "Most processors will provide a cutting form, where you can specify the cuts you want, steak or chop thickness and package quantities." The choices come in two layers. First the ones that apply to everything: how thick the steaks are, how many to a package, how big the roasts, and how the ground beef is packed. Then one decision for each part of the animal: steaks, roasts or ground. Anything you don't claim as a cut goes into the ground beef. Below is each choice with what it costs you elsewhere, how much meat to expect, and a template to fill in before you call the processor.
The short version
- Decide the general settings first: steak thickness, steaks to a pack, roast size, ground beef pack size.
- Then go section by section: chuck, rib, short loin, sirloin, round, and the rest.
- T-bones or strip steaks and tenderloin: it's one or the other.
- Whatever isn't cut as a steak or roast becomes ground beef.
- A 750 lb carcass gives about 490 lb of boneless, trimmed beef, and 185 lb of it is ground.
- The processor's own form is the one that counts. Use this to decide beforehand.
- TaroStack tracks shares, lots and what each customer got. More below.
The general settings
| Setting | Usual choices | What to think about |
|---|---|---|
| Steak thickness | 3/4 inch, 1 inch, 1 1/4 inch | Thicker steaks mean fewer of them |
| Steaks in a package | 1, 2 or 4 | How many eat at your table |
| Roast size | 2 to 3 lb, 3 to 4 lb | Smaller roasts for smaller households |
| Ground beef | 1 lb or 2 lb packages, or patties | You'll have a lot of it |
Section by section
| Section | The choice | Note |
|---|---|---|
| Chuck | Roasts, steaks, or ground | The front shoulder |
| Rib | Ribeye steaks, bone-in or boneless, or rib roasts | |
| Short loin | T-bone and porterhouse steaks, or strip steaks and tenderloin | A T-bone is the strip and the tenderloin on one bone, so you choose one way |
| Sirloin | Steaks, or ground. Tri-tip kept whole or not | Two tri-tips to an animal |
| Round | Roasts, steaks, cube steak, or ground | The hind leg |
| Brisket | Whole, halved, or ground | |
| Short ribs | Keep, or ground | |
| Flank and skirt | Keep, or ground | |
| Stew meat | How many pounds | Comes out of what would be ground |
| Soup bones | Yes or no | |
| Liver, heart, tongue, oxtail | Yes or no, each | One of each to an animal, so a half or quarter shares them |
If a section is new to you, ask the processor what its standard cut is. And if your household doesn't cook roasts, have the chuck or the round ground: you'll use it.
Halves and quarters. A half is one side of the animal, front and hind. Ask how the farm divides a half into quarters. One way is a split half: the half is cut as one, and the packages are divided so that each quarter gets a share of the front cuts and the hind cuts. Then the two people sharing a half have to agree on one cut sheet.
How much meat to expect
South Dakota State University Extension works an example: a 1,200 lb steer with a dressing percent of 63% gives a 750 lb carcass, and that carcass yields about 65%, "roughly 490 pounds, as boneless, trimmed beef". The rest is about 150 lb of fat trim and 110 lb of bone. It then breaks the 490 lb down.
| From a 750 lb carcass | Whole | Half | Quarter |
|---|---|---|---|
| Ground beef (lean trim) | 185 lb | 92.5 lb | 46.3 lb |
| Chuck roasts and steaks | 90 lb | 45 lb | 22.5 lb |
| Round roasts and steaks | 85 lb | 42.5 lb | 21.3 lb |
| Rib and loin steaks | 80 lb | 40 lb | 20 lb |
| Other: brisket, flank, short ribs, skirt | 50 lb | 25 lb | 12.5 lb |
| Boneless, trimmed beef in all | 490 lb | 245 lb | 122.5 lb |
Two things in that table are worth noticing. More than a third of the meat is ground beef before you choose to grind anything else. And the steaks people picture, from the rib and loin, are 80 lb of 490. The same page puts strip loin steaks at about 18 lb from the whole animal and tenderloin at about 9 lb.
"Recognize that these are average figures!" the page says. Fatter or leaner animals, more bone left in, and a closer or looser trim all move them.
Freezer space. The Extension's guide gives one cubic foot for every 35 to 40 lb of packaged meat. A half at 245 lb needs about 6 to 7 cubic feet.
Aging. The same guide describes aging as the time the carcass hangs in the cooler to tenderize, "typically, a few days to up to a few weeks". The processor sets it. Ask how long.
How the price is worked out, from hanging weight to the cost of a pound in the freezer, is in how to price beef by hanging weight. Testing what your own animals yield is in butcher yield test. If you're the one selling, the rules are in selling beef direct to consumer.
Get the template
Download the beef cut sheet. Two sheets and a read-me: the cut sheet, with each choice, its options and a note, and the table of what to expect from a whole, a half and a quarter. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
One cut sheet is a phone call. A farm selling twelve animals a year in halves and quarters has thirty or forty customers, each with a sheet, a deposit, a hanging weight that arrives later, and a balance due at pickup. The processor has its copy. The farm has emails. When a customer says the boxes were short of ribeyes, somebody has to find which animal, which half, and what the sheet said.
How TaroStack does it
TaroStack keeps the shares as orders and the meat as lots.
Each customer is a record, with their sales orders: which share, and at what price.
Each animal's meat is a lot, so every box traces back to one animal and one processing date.
What ships is recorded by lot, against the customer, on one picking list.
Every lot is traced to the customers that got it. If the processor ever calls about a problem, the list of who has that animal's meat is one report.
Stock by location, for the freezer at the farm and the one at the market.
| The question | Emails and the processor's copy | In TaroStack |
|---|---|---|
| Who bought which half | Search the inbox | The order |
| Which animal was that box from | Unknown | The lot |
| Who else has meat from it | Unknown | The recall report |
| What's still in the farm freezer | Open it | Stock by lot |
TaroStack doesn't replace the processor's cut sheet or take payments. Customers, orders, lots and the recall report are on every plan, from $9.99 a month. The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
