Skip to content

GMP Checklist: The Federal Food Rules in 33 Checks

A GMP checklist for a small food maker: people, training, building, sanitation, facilities, equipment and process, each tied to its section of 21 CFR 117.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 20, 2026 · 7 min read

Good manufacturing practice is the federal baseline for anyone who makes, packs or holds food: the rules about clean people, a sound building, working sinks and equipment that can be washed. They're in subpart B of 21 CFR part 117, in eight sections, and almost every line of them says "adequate" without saying how. A GMP checklist turns those sections into questions you can answer by walking round with a clipboard: people, training, grounds, building, sanitation, facilities, equipment, process, storage. Do it monthly, write down what you find, give each finding a date, and go back to check it was fixed. The walk matters less than that last step. Below are the 33 checks with the section each comes from, a made-up month's findings, and a file.

The short version

  • Eight sections of rule, 33 plain questions.
  • Walk it monthly. A different person each time sees different things.
  • Yes or No. "Mostly" is No.
  • Every No gets a finding, a date and a name.
  • Next month starts with last month's findings.
  • TaroStack keeps the records the walk asks about: lots, dates, holds, batches. More below.

The checks

Area Check Rule
People Nobody working ill or with an uncovered wound; everyone knows to report it 117.10(a)
People Clean outer clothing; hair and beards restrained 117.10(b)
People Hands washed before work and after every absence; loose jewelry off 117.10(b)
People No eating, gum, drinks or tobacco where food is exposed 117.10(b)
Training Everyone trained in food hygiene for their job, with a record 117.4
Grounds No litter, weeds or stored equipment sheltering pests; waste area clean 117.20(a)
Building Room to work and clean; allergen work separated by place or time 117.20(b)
Building Floors, walls, ceilings clean and sound; no drip or condensate over food 117.20(b)
Building Lights over exposed food shielded or shatter-resistant 117.20(b)
Building Ventilation controls dust and steam; openings screened against pests 117.20(b)
Sanitation Cleaners and sanitizers safe for the use, labeled, stored away from food 117.35(b)
Sanitation No pests or signs of them 117.35(c)
Sanitation Food-contact surfaces cleaned as often as needed; dry lines dry before use 117.35(d)
Facilities Safe water, sound plumbing, no backflow 117.37(a), (b)
Facilities Toilets clean; hand-washing sinks with running water where needed 117.37(d), (e)
Equipment Cleanable, in repair, seams smooth; no lubricant or metal reaching food 117.40(a), (b)
Equipment A thermometer in every cooler and freezer; instruments accurate 117.40(e), (f)
Process A named person responsible for sanitation 117.80(a)
Process Ingredients inspected and stored safely; allergens identified and kept apart 117.80(b)
Process Food that supports growth kept at safe temperatures; rework labeled 117.80(c)
Process Measures against metal and other foreign material 117.80(c)
Storage Finished food stored and shipped protected 117.93

The file has all 33, with the people, building and sanitation sections split into more lines.

Reading "adequate"

The rule rarely gives a number. It says hand-washing facilities must be "adequate" and "convenient", food-contact surfaces cleaned "as frequently as necessary", instruments "accurate". That's deliberate: a spice blender and a dairy need different things. For a checklist it means you decide what adequate is in your plant, write it down once, and then check against your own standard.

The rule says This made-up granola maker's standard
Hair restrained Hair net and beard net past the red line
Cleaned as frequently as necessary Dry clean between flavors; full clean after any nut flavor
Accurate instruments Scales checked with a test weight each Monday; oven probe checked monthly
Adequate screening against pests Dock door shut unless a truck is on it; strip curtain in place

Write the standard beside the check. Then "OK?" has an answer.

Training is the one check with a record written into the rule: the training in food hygiene that each person gets has to be documented. A sign-off sheet is enough. What to cover is in food safety training requirements.

A month's walk

A made-up granola maker, November 12. Thirty-three checks, three findings.

Check Found Fix by Fixed
Hair and beards restrained Two beard nets missing on second shift Nov 14 Nov 13
Training on record No record for the temp hired November 3 Nov 17 Open
No drip or condensate over food Condensate dripping from the duct over cooling rack 2 Nov 21 Open

The beard nets are a five-minute fix. The condensate is the real finding: water dripping from a duct onto cooling granola is contamination waiting to happen, and until the duct is insulated, rack 2 has to move. Write that on the sheet too. A finding isn't closed by ordering the part.

Who walks. Not the same person every month. The production lead stops seeing the cracked floor tile by the third week. Swap with the office, or with another maker in your building.

What to do with a No. A finding, a date, a name, and a look next month. A checklist where everything has been "Yes" for a year is one nobody believes, including the inspector.

What a GMP checklist isn't

It isn't a food safety plan. GMPs are the conditions food is made under. The plan (hazard analysis, preventive controls, a recall plan) sits on top, and is covered in what is a food safety plan. A restaurant works to its state's food code, not part 117: its version is in commercial kitchen inspection checklist. A wider audit, with records and the plan included, is in food safety audit checklist, and the cleaning procedures themselves in sanitation SOP template.

I've put the rule into plain words, and plain words lose things. Where it matters, read the section. This is general information, not legal advice.

Get the checklist

Download the GMP checklist. The checklist with all 33 checks, the rule beside each, and columns for what was found, the date to fix it by and the date it was fixed; a Summary sheet that counts findings and how many are still open; and a read-me. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

The walk checks the room. Half the rule is about things you can't see on a walk: whether the almonds that came in on Tuesday were inspected, whether the allergen ingredients are identified in the records as well as on the shelf, whether rework from last week's batch was labeled and where it went. Those are answered from records, and if the records are a clipboard and a memory, the answer is "probably".

How TaroStack does it

TaroStack keeps the records behind the checks.

Ingredients inspected on arrival. Receiving records each delivery with its supplier, lot and dates.

Allergens identified. On Growth, each ingredient carries its allergens, and a batch can't start if its label leaves out an allergen its ingredients contain.

Held stock stays held. Quarantine and holds keep a lot out of what you can sell until someone releases it.

Rework and work in process are batches, with a lot code, so "where did it go" has an answer.

Batch records note which lots were consumed, automatically, with your own checklist fields and a sign-off.

The check On a clipboard In TaroStack
Ingredients inspected on arrival A tick A receiving record for each lot
Allergens identified and kept apart Labels on bins On the ingredient and checked at the batch
Rework identified A marker on a tub A lot, with what went into it
Adulterated food kept out of use A sign On hold

TaroStack doesn't do your walk or judge "adequate". Lots, batches and holds are on every plan, from $9.99 a month; allergen tracking starts at Growth, $39 a month. The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

What is a GMP checklist?

A list of questions, taken from the good manufacturing practice rules, that a food maker answers by inspecting its own plant: people, building, sanitation, facilities, equipment, process and storage.

How often should a GMP inspection be done?

The rule doesn't set a frequency. Monthly is common for a small plant, with a look at last month's findings first.

What's the difference between GMP and HACCP?

GMPs are the general conditions food is made under. HACCP, or a food safety plan, identifies specific hazards in your product and the controls for each.

Sources

  1. 21 CFR 117.10 (personnel) and 117.4 (qualifications and training, with records) · read November 20, 2026
  2. 21 CFR 117.20 (plant and grounds) · read November 20, 2026
  3. 21 CFR 117.35 (sanitary operations) and 117.37 (sanitary facilities and controls) · read November 20, 2026
  4. 21 CFR 117.40 (equipment and utensils), 117.80 (processes and controls), 117.93 (warehousing and distribution) · read November 20, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.