Skip to content

Seed Packet Label Requirements: The Federal List

Seed packet label requirements under the Federal Seed Act rules: kind and variety, hybrid, shipper, germination, treated seed, what your State adds, a list.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 21, 2026 · 5 min read

A packet of vegetable seed shipped across a State line is labeled under the Federal Seed Act, whose regulations are in 7 CFR part 201. For a small packet the federal list is short. The packet names the kind and variety, says so if the seed is a hybrid, and identifies who shipped it. Germination is the part to read closely: a packet of one pound or less whose seed meets the federal standard doesn't have to print a germination percentage, and one whose seed falls below it has to say "Below Standard" and print the number. Treated seed says it's treated. Then your State's seed law applies on top, and it can ask for more. Below is each rule with its section, a checklist, and what a packet doesn't record.

The short version

  • Kind and variety, by name. With two or more in a packet, the percentage of each.
  • "Hybrid" where it is one.
  • The interstate shipper's full name and address, or an approved code.
  • At or above the germination standard, in a packet of 1 pound or less: no percentage required.
  • Below the standard: "Below Standard" in 8 point type or larger, with the percentages.
  • Treated seed: a statement naming the treatment, in 8 point type or larger.
  • TaroStack keeps seed by lot with its test date. More below.

What the regulations ask for

On the packet The rule
Clearly legible; extra information allowed if it isn't misleading 7 CFR 201.25
The name of each kind and variety; percentages if more than one 7 CFR 201.26
"Hybrid", for hybrid seed 7 CFR 201.26
Full name and address of the interstate shipper, or an approved code with the consignee's name and address 7 CFR 201.27, 201.28
Nothing on germination, if the seed meets the standard 7 CFR 201.29
"Below Standard", the germination percentage and any hard seed percentage, if it doesn't 7 CFR 201.29
"Treated with ..." naming the substance or process 7 CFR 201.31a

Kind and variety. "Lettuce, Black Seeded Simpson" is a kind and a variety. The name can't carry words that mislead about the variety's history or characteristics.

The shipper. The shipper is the seller who puts the seed into interstate commerce. A code in place of the name and address has to be approved by USDA's Agricultural Marketing Service, and then the buyer's name and address go on the label.

Germination

The rule for small packets works from a table of minimum germination standards, kind by kind, in 7 CFR 201.31.

The lot What the packet says
At or above the standard for its kind Nothing required on germination
Below the standard "Below Standard", in type no smaller than 8 points, with the percentage of germination and of hard seed, if any

Say a lot of lettuce tests at 72 percent after its packets were printed. If 72 percent is under the standard for lettuce in that table, the printed packets can't go out as they are: they need the "Below Standard" statement and the number, or the lot isn't packed. Look the kind up in 201.31 before the packets are printed, not after. That means the germination test comes first, for every lot, and its date and result stay with the lot.

Treated seed

Seed that has been treated says so, in type no smaller than 8 points, with the name of the substance or a description of the process: "Treated with ..." Where what remains on the seed is harmful to people or animals, the rule requires further statements. Untreated seed needs nothing here.

Your State

State seed laws cover seed sold within the State, and they can ask for more than the federal list. Ask your State's seed control official what a packet has to carry, and whether you need a permit to sell seed, before the packets are printed. This is general information, not legal advice.

The code on a packet is in seed lot number. Stock by lot is in seed inventory spreadsheet, and the business in seed company business plan.

Get the checklist

Download the seed packet label checklist. One sheet and a read-me: each thing a packet carries, its section, a made-up example and a column to tick for your own packet. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

A packet is filled from a lot, and the lot has a test. In January there are sixty varieties, two or three lots of each, tested on different dates with different results, and packets printed in runs of a thousand. Which lot is in the packets on the shelf? Was that lot's test above the standard? When a customer writes that the carrots didn't come up, the packet has a number on it and the answer is in a folder of lab reports.

How TaroStack does it

TaroStack keeps each lot with its facts.

Receiving records each lot of seed, with the grower's lot number and its dates.

Packing is a batch. A run of packets takes seed from one lot and packets from stock, and notes which lot it used, automatically.

Your checks are fields on the batch record: germination result, test date, the label version.

Stock is held by lot and date, oldest first by default, with an alert before a date you set arrives.

What ships is recorded by lot, so one report shows which orders got a lot.

The customer's question Folder of lab reports In TaroStack
Which lot was in that packet Match the number by hand The lot on the order
What it tested at, and when Find the report Fields on the batch
Who else got that lot Unknown One report
Which lots are due a new test A calendar An alert

TaroStack doesn't test seed or print your packets. Lots, batches and recalls are on every plan, from $9.99 a month (50 items) or $39 a month (3,000 items). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

What has to be on a seed packet?

For vegetable seed in interstate commerce: the kind and variety, "hybrid" if it is one, the shipper's name and address or an approved code, and statements for seed that is below the germination standard or treated. State law may add more.

Do seed packets have to show the germination rate?

Not under the federal rule, for packets of 1 pound or less whose seed meets the standard in 7 CFR 201.31. Seed below the standard must say "Below Standard" and show the percentage.

How is treated seed labeled?

With a statement that it has been treated, naming the substance or the process, in type no smaller than 8 points.

Sources

  1. 7 CFR 201.25 (contents of the label for vegetable seed) and 201.26 (kind, variety and hybrid) · read November 21, 2026
  2. 7 CFR 201.27 (seller and buyer information) and 201.28 (code designation) · read November 21, 2026
  3. 7 CFR 201.29 (germination of vegetable seed in containers of 1 pound or less) · read November 21, 2026
  4. 7 CFR 201.31a (labeling treated seed) · read November 21, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.