A seed lot number names one batch of seed: a definite quantity, of one kind and variety, that is uniform throughout. That's the definition in the federal seed regulations, and "uniform" is the word that matters. It means every packet filled from the lot would test the same, so one germination test and one purity record speak for all of it. Seed from a different field, a different harvest or a different supplier's bag is a different lot and gets a different number. The number goes on every packet and bag, and it ties the seed to its record: where it came from, how it tested and when, how it was treated, and where it went. Federal rules ask anyone shipping seed across state lines to keep that record, with a sample, for three years. Below are how to build a number, what the record holds, a sheet for a made-up seed house, and the rules.
The short version
- One lot: one variety, one source, one harvest, mixed until it's uniform.
- Give it a number nobody will reuse. Year, kind, running number is enough.
- The number goes on every packet, bag and invoice.
- Keep the lot's record: source, tests, treatment, where it went.
- Keep a sample of each lot.
- TaroStack keeps seed by lot, with its test date, and shows where each lot went. More below.
What makes a lot
| Same lot | Different lots |
|---|---|
| 'Amish Paste' tomato from field 3, harvested and cleaned together | The same variety from a second field or a contract grower |
| One bag from a wholesale seed house, with their lot number | A second bag with a different supplier lot number |
| Seed blended thoroughly before testing | Two batches tested separately, even if later stored side by side |
| This year's harvest and last year's carried-over seed |
If you combine two lots, the blend is a new lot and needs a new test, because neither old test describes it.
A lot is also a decision about risk. Small lots mean more tests and more numbers to track. Large lots mean that when one fails, more seed fails with it.
Building the number
Any format works if it's unique and people can read it. This made-up seed house uses three parts.
| Part | Example | Why |
|---|---|---|
| Year of harvest or purchase | 26 | Age matters for seed more than almost anything |
| Kind, three letters | TOM, LET, BEA | Readable at a glance in the seed room |
| Running number | 01, 02 | Each lot of that kind in that year |
So 26-TOM-02 is the second tomato lot of 2026. The variety isn't in the number: it's in the record, and on the packet anyway. Don't put meaning into the number that might change (a field name, a customer). If seed came from a supplier, record their lot number beside yours, and never use theirs as yours: two suppliers can hand you the same number.
The lot's record
| Lot | Variety | Source | Their lot | Quantity | Germination | Tested | Packets |
|---|---|---|---|---|---|---|---|
| 26-TOM-01 | Tomato, 'Amish Paste' | Own field 3 | 2.4 lb | 92% | Oct 20, 2026 | 1,150 | |
| 26-TOM-02 | Tomato, 'Black Krim' | Hollow Road Farm | HR-26-11 | 1.8 lb | 88% | Oct 20, 2026 | 860 |
| 26-LET-01 | Lettuce, 'Buttercrunch' | Wholesale seed house | L4471-B | 5.0 lb | 94% | Sep 2, 2026 | 0 |
| 26-BEA-01 | Bean, 'Provider' | Own field 1 | 62 lb | 81% | Oct 27, 2026 | 400 | |
| 25-CAR-03 | Carrot, 'Danvers 126' | Wholesale seed house | C2207-A | 3.0 lb | 74% | Oct 27, 2026 | 2,100 |
Source. Your own field, a contract grower, or a supplier. For seed that can't be told apart by looking (most varieties of a kind), the federal rules ask for something that establishes the variety: a grower's declaration, an invoice, or another document. Keep it with the lot.
Germination and test date. The test belongs to the lot, and it ages. Seed labeling rules tie what's printed on the packet to a test within a set time; the periods differ by kind of seed and by state, so check the rule for yours. The carrot lot above is carried over from last year and has dropped to 74%: retested, and first in line to sell or discount.
Treatment. Whether the seed was treated or coated, and with what. Treated seed has labeling rules of its own.
Sample. A sample of each lot is kept. The federal figure for vegetable seed is at least 400 seeds.
Where it went. How many packets were filled, and which orders they shipped on.
What the federal rules ask
For agricultural and vegetable seed shipped in interstate commerce:
| Rule | What it says |
|---|---|
| A lot | A definite quantity identified by a lot number, uniform for the factors on its label |
| Records | A complete record of each lot, kept 3 years |
| Sample | A sample of each lot; it may be discarded a year after the whole lot has been disposed of |
| Traceable | Kept so that origin, treatment, germination and variety can be traced from the grower to the consumer |
| Variety | Records that establish it, including a grower's declaration where seed can't be told apart |
Every state also has its own seed law, covering sales within the state, with its own labeling and test-date rules, and usually a permit or registration. Ask your state department of agriculture. This is general information, not legal advice.
When a customer writes
A customer writes that a packet of beans hardly came up. With a lot number on the packet, the answer is five minutes. Look up 26-BEA-01: 81% in October, which is on the low side for beans. Plant thirty from the retained sample on a damp paper towel. If twenty-four sprout, the seed is as tested and the trouble was likely in the garden. If ten do, the lot has failed since the test, and you know exactly which 400 packets to replace and to pull from the shelf. Without the number, you can only apologize.
Stock by variety and packet is in seed inventory spreadsheet, the plan for the business in seed company business plan, and how lot numbers work for other products in how to create lot numbers.
Get the sheet
Download the seed lot record. One row for each lot: number, variety, source, the supplier's lot, date, quantity, germination and test date, treatment, sample kept, packets filled. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
The sheet says 1,150 packets of 26-TOM-01 were filled. It doesn't say which orders they went out on. That's in the order system, by variety, with no lot. To find the customers who received a failed lot, someone matches packing dates to order dates and hopes only one lot of that variety was on the shelf that week.
How TaroStack does it
TaroStack keeps the lot on the stock and on the order.
Each lot is stock, with your number, the supplier's, the date, and the germination test as a date you can be alerted about before it runs out.
Packing is a batch. Bulk seed and empty packets in, filled packets out, and the batch notes which lot it used, automatically. A lot label prints with the number.
The oldest lot is picked first by default, so last year's carrot sells before this year's.
Sales orders and delivery notes carry the lots picked.
One report for a recall: which customers got 26-BEA-01, and how many packets are still on the shelf. Starting a recall holds them.
| The job | Spreadsheet and an order system | In TaroStack |
|---|---|---|
| Which lot is in this packet | The printed number | The lot, from packing to shelf |
| Which customers got a lot | Match dates and hope | One report |
| A test about to go out of date | Remember to check | An alert |
| Sell older seed first | The packer's memory | By default |
TaroStack doesn't run germination tests or print state-specific seed labels. Lots, batches and recalls are on every plan; a seed catalog wants Growth, at $39 a month for 3,000 items. The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
