Skip to content

How to Price Handmade Furniture: A Dining Table, Costed

How to price handmade furniture: a white oak dining table costed by the board foot with waste, 35 hours, shop overhead, a showroom's cut, and a calculator.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 21, 2026 · 6 min read

A piece of handmade furniture is priced from four numbers. Lumber, by the board foot, bought with an allowance for waste. Hours at the bench, at a rate that's a real wage. The shop: rent, power, blades and insurance for the days the piece takes. And a margin on top, because a shop that only covers its costs can't buy a new jointer. For a white oak dining table that comes to $1,967 before the margin: $722 of materials, 35 hours, and $180 of shop. This maker sells it direct for $3,200. "Materials times three" would have said $2,167, and left $134 for the business after paying the maker. Below is the table costed, what two prices leave, and a calculator.

The short version

  • Lumber: board feet in the parts, plus 25% for waste, at what you pay.
  • Hours: all of them, design and delivery included, at a wage.
  • Shop overhead: a year's fixed costs ÷ the days you build, × the days this piece takes.
  • Price = full cost ÷ (1 − margin − fees).
  • A showroom that keeps 40% needs a much higher price.
  • Quote in writing, with a deposit that buys the lumber.
  • TaroStack takes board feet off the rack when you record the build. More below.

The table, costed

A white oak dining table Amount Cost
White oak, 4/4, with 25% for waste 78 bd ft at $8.40 $655.20
Finish, glue and sandpaper $45.00
Fasteners and levelers $22.00
Time at $30 an hour 35 hours $1,050.00
Shop overhead for the days it takes $180.00
Moving blankets and delivery supplies $15.00
Full cost $1,967.20

Lumber. The cut list adds up to 62 board feet. Rough boards have knots, checks, sapwood and offcuts, so this shop buys a quarter more: 78 board feet. The allowance is higher for long, wide parts like a tabletop, where a board has to be clear for seven feet. Price the 78, not the 62. The board foot sum and the allowance are in lumber inventory spreadsheet.

Hours. Thirty-five hours covers the design and the drawing, milling, joinery, glue-ups, sanding, three coats of finish with the waiting between them, and delivery. Sanding and finishing are a third of it and the part people forget. Keep a time sheet on one piece from the first sketch.

The shop. Add up a year of rent, power, insurance, blades and repairs, and divide by the days you build. This shop's comes to $36 a day, and the table takes five.

What each price leaves

Commission, direct Through a showroom
The customer pays $3,200.00 $4,200.00
Fees or the showroom's share 3%: $96.00 40%: $1,680.00
You receive $3,104.00 $2,520.00
Full cost $1,967.20 $1,967.20
Left $1,136.80 $552.80

Direct, the table leaves $1,136.80 after the maker's 35 hours are paid. That's what pays for the weeks between commissions, the tool that breaks, and the piece that has to be remade.

A showroom or gallery that keeps 40% has to price the table at $4,200 for the maker to clear half as much. If the room won't bear $4,200, the showroom is advertising, not a sales channel, and should be judged as that.

The formula, the other way round. To leave 35% after a 3% fee: $1,967.20 ÷ (1 − 0.35 − 0.03) is $3,173. Round it to a number that sounds like furniture: $3,200.

Why not materials times three

Rule Gives Leaves after full cost
Materials × 3 $2,167 $134
Materials × 4 $2,889 $835
Full cost ÷ 0.62 $3,173 $1,111

A multiple of materials works when labor is a steady share of the cost. In furniture it isn't. A plain bench and a table with breadboard ends can have the same lumber in them and three times the hours. Price the hours.

What moves the price

  • Species. Walnut at $11.50 a board foot adds $242 to this table's lumber over white oak at $8.40.
  • Joinery and detail. Drawers, curves, inlay and hand-cut joints are hours. Quote them as hours.
  • Size. A longer top needs longer clear boards, and the waste goes up.
  • Finish. A hand-rubbed oil finish and a sprayed lacquer take different times. Know yours.
  • Delivery. Across town is in the price. Farther is a line of its own: see how much to charge for a travel fee.

Smaller work is in how to price woodworking projects, and whether the trade pays in is woodworking profitable.

Get the calculator

Download the handmade furniture pricing calculator. Two sheets and a read-me: the piece's cost from its lumber, materials, minutes and shop overhead, and prices, where each price shows what it leaves. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

The quote assumed 78 board feet at $8.40. The rack has 95 board feet of white oak, most of it delivered last week and too wet to mill, and the yard's price went up to $9.10 in between. Three commissions are on the floor, each with boards pulled for it. What this table's lumber really cost, and whether there's dry oak for the next one, aren't in the calculator.

How TaroStack does it

TaroStack takes the wood off the rack when you record the work.

Lumber is stock by species and thickness, in board feet, with what each delivery cost you.

Each piece is a recipe, with scrap: 62 board feet of parts and the allowance on top. Record the build and the lumber comes off stock at what it cost.

Actual cost beside the standard, so a table that ate more oak than quoted shows.

"What could I make right now" says whether the rack covers a commission, and which species stops you.

A price-creep report by supplier shows hardwood moving before the next quote goes out.

The job Calculator and a rack In TaroStack
What the table's lumber really cost The quote's price From what you paid
Oak for the next commission Walk to the rack What could I make right now
Board feet after three jobs Not subtracted Taken off with each build
The yard's prices going up Noticed on the invoice Price creep, by supplier

TaroStack doesn't cost your labor: the hours are yours to count. Stock, lots and recipes are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

How do you price handmade furniture?

Add lumber with a waste allowance, your hours at a wage, shop overhead for the days it takes, and delivery. Then divide by one minus the margin you need and your fees. The table here costs $1,967 and sells for $3,200.

Is materials times three a good way to price furniture?

Not usually. For this table it gives $2,167, which leaves $134 after the cost of making it. It ignores hours, and hours are more than half the cost.

How much lumber should I allow for waste?

This shop buys 25% more than the cut list: 78 board feet for 62 of parts. Long, wide parts and lower grades need more.

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.