Skip to content

Is Woodworking Profitable? Boards and a Table, Costed

Is a woodworking business profitable? Cutting boards and a commissioned table costed with the hours in them, a full month, and what 12% on the price does.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 21, 2026 · 6 min read

Woodworking is profitable only when the hours are in the price, and they're most of the cost. A maple edge-grain cutting board sells for $95. It has $24.50 of lumber, glue and finish in it and an hour and a half of work, and with selling fees it costs $60.20: it keeps 36.6%. Lumber is about a quarter to a third of a piece. In a full-speed month the made-up shop below sells $9,470, keeps $3,655, and has $2,180 left after $1,475 of fixed costs, with every hour in the shop paid at $20. That's about 150 hours of building. And the same shop, with prices 12% lower, ends its first year in the red. Below are a board costed, the four pieces, the month, and a calculator.

The short version

  • An edge-grain board keeps 36.6% of $95, with 1.5 hours paid at $20.
  • Lumber is about a third of the cost. Your hours are half.
  • Every piece here keeps 37% to 45%. None is a bargain to make.
  • A full month leaves $2,180 for about 150 hours of building.
  • Prices 12% lower turn the year's profit into a small loss.
  • TaroStack keeps lumber by the board foot and what each piece leaves. More below.

A board, costed

A maple edge-grain cutting board, its share of a run of ten.

An edge-grain cutting board Cost
Maple, 3 board feet bought $21.00
Glue, finish and sandpaper $3.50
Your hours, 1.5 at $20 $30.00
Selling and card fees, 6% of $95 $5.70
Cost $60.20

Lumber is bought rough and milled flat and square, and the offcuts go in the scrap bin, so a board takes more lumber than it holds. The table shows what's bought. The hour and a half is the board's share of a run of ten: milling, gluing up, planing, sanding and oiling ten at once.

Margins by product

Product Sold Price Cost Gross profit Margin
Edge-grain cutting board, maple Fairs and online $95.00 $60.20 $34.80 36.6%
End-grain cutting board Fairs and online $240.00 $151.40 $88.60 36.9%
Walnut serving board Fairs and online $75.00 $41.50 $33.50 44.7%
Side table, commissioned Invoiced $750.00 $475.50 $274.50 36.6%

The serving board keeps the most, 44.7%: a single piece of walnut, an hour, no glue-up.

The end-grain board sells for $240 and keeps 36.9%, the same as the simple one, because four hours are in it. It leaves $88.60, about $22 for each of those hours on top of the wage. The edge-grain board leaves about $23 an hour.

A month at full speed

Product Units Sales Gross profit
Edge-grain cutting board, maple, fairs and online 40 $3,800 $1,392
End-grain cutting board, fairs and online 8 $1,920 $709
Walnut serving board, fairs and online 30 $2,250 $1,005
Side table, commissioned, invoiced 2 $1,500 $549
Month $9,470 $3,655
Fixed costs −$1,475
Left $2,180

Fixed costs are $1,475 a month: shop rent ($800), market and fair fees ($200), power and dust collection ($120), blades, bits and sharpening ($100), the vehicle ($100), insurance ($80), and the website and software ($75).

Break-even

Fixed costs a month $1,475
Gross profit on each dollar of sales 39 cents
Sales needed to cover fixed costs $3,822
As a share of a full-speed month 40%

The shop covers its fixed costs at about $3,822 of sales a month, 40% of a full month. In the plan this example comes from, the first year ends about $7,300 ahead on $64,700 of sales, on top of the hourly wage.

What moves it

Change Effect on a month
Prices 12% lower across the board −$1,074
Runs of ten take a quarter of an hour off each edge-grain board +$200
Hardwood up a fifth −$377
One more commissioned table +$274

Price. Twelve percent off every price takes nearly half of what the month leaves. At a fair, the customer comparing your board with a factory one isn't your customer.

Runs. Ten boards milled, glued and sanded together take far less time each than ten made one by one. The hours saved are the only raise a one-person shop gets.

The first year, month by month, is in woodworking business plan. Pricing a piece is in how to price woodworking projects, and one product worked through in is selling cutting boards profitable.

Get the calculator

Download the woodworking profit margin calculator. One line for each product and where it sells: price, materials, packaging, labor and fees. It works out the cost, the gross profit, the margin and markup, and the price a target margin would need. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

A customer wants six matching walnut boards for a wedding. The rack has walnut from two purchases at two prices, some of it already cut for a table. How many board feet are free, and what does a board cost from the lumber actually on the rack? The margin table says $14 of walnut. That was last year's price.

How TaroStack does it

TaroStack keeps the lumber rack counted and each piece costed.

Lumber is stock by species, in board feet, with what each purchase cost you. Hardware, finish and glue are stock too.

Each product is a recipe: three board feet of maple, finish, a box. Record a run and the lumber comes off stock at what it cost.

"What could I make right now" says how many boards the rack allows, and which species stops you.

A price-creep report by supplier shows hardwood moving before the next quote.

Finished pieces are stock, counted on a phone at a fair, with no signal.

The job Calculator In TaroStack
Board feet of walnut left Measure the rack Stock by item
What a board costs this month Last year's price From what you paid
Lumber going up Noticed at the yard The price-creep report
Boards at the fair A paper list Counted on a phone

TaroStack costs materials and packaging. Your hours in the shop are yours to add. Stock, recipes and costing are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

Is woodworking profitable?

It can be, if the prices pay for the hours. This example has $2,180 left in a full month on top of $20 an hour, for about 150 hours of building.

What is the profit margin on cutting boards?

A $95 maple edge-grain board keeps 36.6% of its price here, with an hour and a half of work paid at $20 an hour.

How much do woodworkers make?

This made-up one-person shop sells $9,470 in a full month. About $3,000 of that is the wage for the hours, and $2,180 is left over after the shop's costs.

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.