Skip to content

Accounting for a Manufacturing Business: The Cost Flow

Accounting for a small manufacturing business: three inventories, how cost flows from materials to cost of goods sold, a worked month, and a worksheet.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 21, 2026 · 6 min read

Accounting for a business that makes things differs from accounting for one that resells them in one respect, and everything else follows from it: what you buy isn't what you sell. Money spent on materials doesn't become a cost on the profit and loss statement when you pay for it. It becomes raw materials on the shelf. When a batch starts, it moves into work in process. When the batch is finished, into finished goods. Only when the product is sold does it reach cost of goods sold. The same dollar sits in three inventories on the way. Tracking that flow is what manufacturing accounting is. In the made-up month below, a granola maker buys $11,850 of materials and reports a cost of goods sold of $19,550, because labor and overhead joined the materials, and because of what was on the shelves at each end of the month. Below are the flow, the sums, the decisions to take to your accountant, and a worksheet.

The short version

  • Three inventories: raw materials, work in process, finished goods.
  • Purchases go to inventory, not to cost.
  • Materials used = start + purchases − end.
  • Cost of goods manufactured = materials used + labor + overhead, adjusted for work in process.
  • Cost of goods sold = cost of goods manufactured, adjusted for finished goods.
  • It all rests on counts at each month end.
  • TaroStack keeps the three inventories and their value as the work is recorded. More below.

The flow

Where the dollar is What it is It moves on when
Raw materials Ingredients and packaging on the shelf A batch uses them
Work in process Batches started, not finished The batch is finished
Finished goods Product ready to sell It's sold
Cost of goods sold On the profit and loss statement

A reseller has one stop. A manufacturer has three, and a month-end balance in each.

A month, worked

A made-up granola maker's November.

Raw materials and packaging, November 1 $6,400
Purchases, freight included $11,850
Raw materials and packaging, November 30 −$5,900
Materials used $12,350
Production labor $6,200
Production overhead $2,750
Total manufacturing cost $21,300
Work in process, November 1 $1,100
Work in process, November 30 −$1,500
Cost of goods manufactured $20,900
Finished goods, November 1 $8,300
Finished goods, November 30 −$9,650
Cost of goods sold $19,550
Sales $41,200
Gross profit $21,650 (52.5%)

Three things happened that a simple "purchases = cost" would miss.

More was used than bought. Purchases were $11,850 and materials used were $12,350: the shelves ran down by $500.

Not everything started was finished. Work in process grew by $400, so $400 of the month's manufacturing cost is still in half-made batches.

Not everything finished was sold. Finished goods grew by $1,350: stock built ahead of the holidays. That cost waits on the balance sheet until those cases sell.

The formula for the middle of that table is set out in cost of goods manufactured formula.

What goes into the product's cost

Materials, always. After that there's a decision.

Cost In the product's cost?
Ingredients and packaging, with inbound freight Yes
Wages of the people making the product Depends on your method
Production space, power, equipment Depends on your method
Selling, delivery to customers, marketing, office No: expensed as it happens

Adding production labor and overhead to the product's cost (often called full absorption costing) gives a truer cost for each unit and is required for some businesses. Expensing them as they're paid is simpler, and small makers often start there. The choice changes reported profit in any month when inventory rises or falls, and tax rules bear on it. It's your accountant's call. The worksheet works either way: type zero for the two lines if yours are expensed.

How overhead gets shared across products is in standard costing example, and one batch's full cost in batch costing example.

Counting, or keeping a running record

There are two ways to know the three balances.

Periodic. Count everything at month end, price it, and let the sums above work out what was used. Simple, and blind between counts: you don't know your cost of goods until the count is done.

Perpetual. Record every receipt, every batch and every sale as it happens, so the balances are always current, and count to check them. More to keep up, and it tells you where a difference arose.

Either way, somebody counts. The method is in how to count inventory.

Waste, and other people's goods

Waste. Expired ingredients, a burnt batch, a dropped case. If you only count, waste disappears into materials used and you never see it. Record write-offs as they happen, to their own account: see expired stock journal entry.

Goods that aren't yours. If you co-pack, a client's ingredients on your shelf aren't your inventory. Leave them out of the count's value: see customer-supplied raw materials.

The accounts all this is recorded in are in chart of accounts for a manufacturing company. This is general information, not accounting advice.

Get the worksheet

Download the manufacturing cost flow worksheet. Type ten amounts on the Inputs sheet: the three inventories at the start and end of the month, purchases, labor, overhead and sales. The Cost flow sheet works out materials used, cost of goods manufactured, cost of goods sold and gross profit. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

The worksheet needs six inventory figures a month, each "at cost". For raw materials that means every sack priced at what its delivery cost. For finished goods, every case at what its batch cost to make. For work in process, the cost so far of each unfinished batch. Done by hand that's days of work, so most small makers estimate, and the gross profit they report each month is partly a guess that gets corrected, painfully, at the year-end count.

How TaroStack does it

TaroStack isn't an accounting system and doesn't post journal entries. It's the perpetual record underneath one.

Receiving puts stock on at its cost, freight and other landed costs included, in layers by delivery.

A batch moves the value. It takes materials out at their cost and puts the product in at what it cost to make. An intermediate step is stock too, with its cost so far.

Stock value by site and month, by category: the three balances, without pricing a count by hand.

Counts check it. On a phone, with the value of each difference shown before it's posted, and a reason on every adjustment.

Actual against standard cost, batch by batch.

The figure By hand In TaroStack
Raw materials at month end Count, then price every line Stock value by category
Work in process An estimate Unfinished batches, costed
Finished goods at cost Cases × a standard cost Each lot at its batch's cost
Waste Lost in "materials used" Adjustments by reason

Every list exports to CSV for your accountant, and your QuickBooks or Xero lists import when you set up. Recipes, batches and costing are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

How is accounting different for a manufacturing business?

A manufacturer holds three inventories (raw materials, work in process, finished goods), and the cost of materials, and often labor and overhead, moves through them before it becomes cost of goods sold.

How do you calculate cost of goods sold for a manufacturer?

Materials used plus production labor and overhead gives total manufacturing cost. Adjust for the change in work in process to get cost of goods manufactured, then for the change in finished goods to get cost of goods sold.

Are purchases of raw materials an expense?

Not when bought. They're inventory. They become cost of goods sold when the product they went into is sold.

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.