Skip to content

How Many Burgers Can You Make From a Cow? The Arithmetic

How many burgers from one cow: about 740 quarter-pounders from the trim of a 1,200 lb steer, or 1,960 with the whole animal ground. The sums and a calculator.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 21, 2026 · 6 min read

About 740 quarter-pound burgers, if you cut the steaks and roasts as usual and grind only the trim. About 1,960, if you grind the whole animal. Both numbers come from one worked example by South Dakota State University Extension: a 1,200 lb steer gives a 750 lb carcass, the carcass gives about 490 lb of boneless, trimmed beef, and about 185 lb of that is lean trim, the part that would be ground anyway. At four patties to the pound, 185 lb is 740 burgers and 490 lb is 1,960. Below are the sums step by step, the same for other patty sizes, what it means if you're buying an animal for a burger business, and a calculator.

The short version

  • A 1,200 lb steer is not 1,200 lb of meat. About 490 lb ends up boneless and trimmed.
  • About 185 lb of that is trim that's ground in any case.
  • 185 lb at four to the pound is 740 quarter-pounders.
  • Grind everything and it's 490 lb: 1,960 quarter-pounders.
  • Patty weights are raw. They cook down.
  • These are averages. Animals and cutting vary.
  • TaroStack tracks each animal as a lot and what each batch of patties used. More below.

From live weight to ground beef

Step Pounds Share of the step before
Live steer 1,200
Carcass (hanging weight) 750 63%
Boneless, trimmed beef 490 65%
Of which lean trim, ground 185 38%

The Extension's page explains the two losses. The first is everything that isn't carcass. Dressing percent, the share of live weight that becomes carcass, "for fed beef is usually around 62-64%". The second is fat and bone: of the 750 lb carcass in the example, about 150 lb is fat trim and 110 lb is bone. What's left is about 40% of the animal you started with.

The page adds a caution worth repeating: "Recognize that these are average figures!" Retail yield from a carcass ranges from about 55% to 75%, depending on how fat and how heavily muscled the animal is and how it's cut.

Burgers, by patty size

What's ground Ground beef Quarter-pound Third-pound Half-pound
The lean trim only 185 lb 740 555 370
The whole animal 490 lb 1,960 1,470 980

So a "cow" is somewhere between 370 and 1,960 burgers, and the answer depends on two choices: how big the patty is, and whether you keep the steaks.

Should you grind the whole animal?

If you grind only the trim, the other 305 lb of the 490 is steaks, roasts, brisket and the rest. The Extension's example breaks it down as 90 lb of chuck, 85 lb of round, 80 lb of rib and loin steaks and 50 lb of other cuts.

For a burger business, three ways to look at it:

  • Grind the chuck and round too. That's 185 + 90 + 85 = 360 lb, or 1,440 quarter-pounders, and you still have 80 lb of rib and loin steaks to sell or serve as a special.
  • Grind everything. 1,960 burgers, and every one of them contains ribeye. That's a selling point, and it's also the most expensive way to make a burger.
  • Buy trim, not animals. If all you sell is burgers, a whole animal makes you a steak seller too.

What a whole animal costs by the pound in the freezer is in how to price beef by hanging weight. How the choices are written down for the processor is in beef cut sheet.

How long would it last?

Burgers sold a day From the trim (740) From the whole animal (1,960)
40 18 days 49 days
100 7 days 19 days
250 3 days 7 days

A food truck selling 100 quarter-pounders a day gets through the trim of one steer in a week and the whole animal in under three weeks. That's the number to hold up against a rancher's offer of "a whole steer", and against your freezer. The Extension's freezer guide allows a cubic foot for every 35 to 40 lb of packaged meat, so 490 lb needs about 12 to 14 cubic feet.

Patty weights here are raw. A burger loses weight on the grill, so a quarter-pound patty isn't a quarter pound on the bun. Measure your own loss: see butcher yield test. What the burger then costs to make is in food pricing calculator.

Get the calculator

Download the burgers from a cow calculator. One sheet and a read-me: type the pounds of ground beef and the patties to the pound, and it gives the count. The Extension's two cases are filled in. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

The arithmetic is for an average steer. Yours came back from the processor at 438 lb of meat, not 490, with 160 lb ground. It went into the freezer in unlabeled boxes beside what was left of the last one. Six weeks later the patties from one of them are tougher than the other's, and nobody can say which animal they were, or what a burger from each actually cost.

How TaroStack does it

TaroStack keeps each animal apart and costs what's made from it.

Each animal's meat is received as a lot, with the date, the pounds and what you paid for it, processing included.

A batch of patties is a recipe run: so many pounds of ground beef in, so many patties out, and the batch notes which lot it used.

Every batch is costed from what it used, so a burger from a $4,075 animal and one from boxed trim each have their own cost.

Stock goes out first-expired-first-out by default, so the older animal is used up first.

Yield against the recipe: if 100 lb of beef should make 400 patties and made 380, that shows.

The question Freezer and memory In TaroStack
How much of that steer is left Open the freezer Stock by lot
Which animal were these patties from Unknown On the batch
What a patty cost The rancher's price, roughly From the batch
Which lot to use next Whatever's on top First-expired-first-out

TaroStack doesn't run the till. It connects to Square. Lots, recipes and batch costs are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

How many burgers can you make from one cow?

About 740 quarter-pound burgers from the trim of a 1,200 lb steer cut the usual way, or about 1,960 if all 490 lb of boneless, trimmed beef is ground. That's from South Dakota State University Extension's worked example.

How much ground beef do you get from a cow?

In the same example, about 185 lb of lean trim from a 750 lb carcass when the rest is cut into steaks and roasts. The whole animal yields about 490 lb of boneless, trimmed beef.

How much meat is on a 1,200 lb steer?

About 490 lb of boneless, trimmed beef: a 750 lb carcass at a 63% dressing percent, then about 65% of the carcass after fat and bone are removed. Yields vary with the animal and the cutting.

Sources

  1. SDSU Extension: How Much Meat Can You Expect from a Fed Steer? (updated July 13, 2022: a 1,200 lb steer, a 750 lb carcass, 490 lb of boneless trimmed beef, 185 lb of it lean trim) · read November 21, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.