A slaughter plant under USDA inspection must have a written HACCP plan: 9 CFR 417.2 lists slaughter of all species first among the kinds of processing that need one. The hazard is what the animal carries in on its hide and in its gut. A slaughter floor has no cooking step, so the plan is built from the next best things: keeping the carcass clean as the hide and viscera come off, checking every carcass for visible contamination, an antimicrobial rinse, and chilling. Cattle add one more, the removal of specified risk materials. Below is what the regulation asks for, a plan for a made-up very small plant, three days of its chill log, and a worksheet.
The short version
- A written hazard analysis and a flow chart come first. The plan follows from them.
- For each CCP the plan lists the limit, how it's monitored and how often, corrective actions, records and verification.
- Records hold the actual values and observations.
- Sign and date the plan at the start, at every change, and at least once a year.
- Sanitation SOPs are a separate, signed document.
- Your own hazard analysis decides your CCPs. The four here are one plant's.
- TaroStack records each lot from carcass to customer. More below.
What 9 CFR 417 asks for
| Requirement | Where | What it says |
|---|---|---|
| Hazard analysis | 417.2(a) | Hazards reasonably likely to occur, before, during and after entry into the plant, with a flow chart and the intended use |
| The plan | 417.2(b) | Written, for each product, wherever the analysis finds such a hazard. Slaughter of all species is the first category |
| Its contents | 417.2(c) | Hazards, CCPs, critical limits, monitoring procedures and their frequency, corrective actions, a recordkeeping system, verification |
| Records | 417.2(c)(6) | The actual values and observations obtained during monitoring |
| Signature | 417.2(d) | Signed and dated on acceptance, on any modification, and at least annually on reassessment |
| Verification | 417.4(a) | Validation at the start; then calibration, direct observation and records review; reassessment at least once a year |
| Sanitation SOPs | 416.12 | Daily procedures before and during operations, signed and dated, with pre-operational cleaning of food contact surfaces |
One plant's CCPs
| CCP | Hazard | Critical limit | Monitoring |
|---|---|---|---|
| 1 Carcass check | Pathogens in fecal material, ingesta, milk | No visible contamination on any carcass | Every carcass, before the rinse |
| 2 Antimicrobial rinse | Pathogens left on the surface | The concentration, temperature and coverage in the plant's supporting documents | Start of day and every 2 hours |
| 3 Specified risk materials | The BSE agent, in cattle | All listed materials removed and kept apart | Every carcass |
| 4 Chilling | Growth on a warm carcass | Carcass surface 40°F or less within 24 hours (this plant's own) | Every lot |
The carcass check rests on 9 CFR 310.18: carcasses are handled to prevent contamination with fecal material, urine, bile, hair, dirt or foreign matter, and any that occurs is promptly removed. The dressing procedures that keep it off in the first place, such as rolling the hide away and tying the bung, aren't CCPs here. They're the work that makes the CCP passable.
The rinse. Its numbers come from the plant's supporting documents for the product it uses, not from this page. The plan's verification includes the generic E. coli sampling that 9 CFR 310.25 requires of every plant that slaughters livestock.
Specified risk materials. 9 CFR 310.22 names them: from cattle 30 months and older, the brain, skull, eyes, trigeminal ganglia, spinal cord, most of the vertebral column and the dorsal root ganglia, and from all cattle the distal ileum and the tonsils. They are inedible, and they're removed, kept apart from edible product and disposed of. So each animal's age is part of the record.
Chilling. The limit is this plant's own, backed by its supporting documents.
Three days of the chill log
| Day | Lot | Surface after 24 h | Limit | OK? |
|---|---|---|---|---|
| Nov 19 | Beef 1119 | 36°F | 40°F or less | Yes |
| Nov 20 | Hogs 1120A | 38°F | 40°F or less | Yes |
| Nov 20 | Beef 1120B | 44°F | 40°F or less | NO: act |
| Nov 21 | Beef 1121 | 37°F | 40°F or less | Yes |
Lot 1120B missed its limit. Fourteen carcasses had been hung on rails spaced for ten, and air couldn't move between them. The lot was held, read 39°F at 7:30 that evening, and stayed on hold for the assessment the plan's corrective action calls for before any of it was released. The rail spacing rule went up on the cooler door.
This is general information, not legal advice. Further processing has its own pages: HACCP plan for butcher shop and HACCP plan for sausage. Inspection itself is in USDA meat inspection requirements, and the exemption for custom work in custom exempt meat processing.
Get the worksheet
Download the slaughter HACCP plan worksheet. Three sheets and a read-me: the hazard analysis from live animals to cold storage, the plan with its four CCPs, and a monitoring log that marks a reading outside its limit. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
Lot 1120B is on hold, and the inspector asks where every piece of it is. Six carcasses are in the cooler. Two were broken down this morning before the reading was taken, and their boxes are in the freezer beside boxes from 1119. A farmer picked up a custom order at noon. The chill log has one line for the lot. It doesn't know about the boxes.
How TaroStack does it
TaroStack keeps a lot's identity as it's cut, boxed and shipped.
Each slaughter lot is a lot, with its date. Lot labels print with the code.
Each cutting or grinding run is a batch. Record it and the lot it used is noted on the batch record automatically. The boxes get their own lot code and dates.
Your checks are fields on the batch record: carcass check signed, chill reading, the animal's age.
A hold stops a lot. Held stock can't be picked or shipped until someone releases it.
One report for a lot: what was made from it, which customers got it, and what's left.
| The inspector asks | Paper | In TaroStack |
|---|---|---|
| Where is all of lot 1120B | Walk the cooler and freezer | Stock by lot |
| What was cut from it | Cut sheets | The batches that used it |
| Who has taken any | Invoices | One report |
| Is it all on hold | Tags | A hold on the lot |
TaroStack doesn't write your HACCP plan, take temperatures or replace the records 9 CFR 417 requires. Batches, lots, holds and recalls are on every plan, from $9.99 a month (50 items) or $39 a month (3,000 items). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
