Skip to content

HACCP Plan for Sausage: Categories, CCPs and Records

A HACCP plan for sausage in a USDA-inspected plant: which processing category each sausage is in, what 9 CFR 417.2 requires, two CCPs, a log and a worksheet.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 19, 2026 · 7 min read

A plant that makes sausage under USDA inspection needs a written HACCP plan under 9 CFR 417.2, and the first thing that plan depends on is which processing category the sausage is in. Fresh breakfast sausage is "raw product, ground". Smoked, cooked sausage is "fully cooked, not shelf stable". Dry salami is one of the shelf-stable categories. Each has different hazards and different control points, so "a HACCP plan for sausage" is really three different plans. Every one of them has the same seven parts, is signed and dated, and is reassessed at least once a year. Below are the categories, what the rule requires, a plan for cooked smoked sausage, and a worksheet.

The short version

  • Start with the processing category. It decides the hazards.
  • A hazard analysis and a flow chart come before the plan.
  • The plan lists hazards, CCPs, critical limits, monitoring, corrective actions, records and verification.
  • Records hold the actual readings, not ticks.
  • Signed and dated when written, when changed, and every year.
  • TaroStack records each lot with the meat that went into it and holds it until it's released. More below.

Which category is your sausage?

The rule lists nine processing categories. Sausage lands in four of them.

Sausage Category in 9 CFR 417.2(b) Where the control usually sits
Fresh: breakfast links, Italian, bratwurst sold raw Raw product, ground Cold chain; the customer cooks it
Cooked and smoked: andouille, hot dogs, kielbasa Fully cooked, not shelf stable Cooking, cooling, and Listeria after cooking
Partly cooked, sold to be cooked Heat treated but not fully cooked, not shelf stable Cold chain; labeling
Dry and semi-dry: salami, summer sausage Not heat treated, shelf stable; or heat treated, shelf stable Fermentation, drying, sometimes heat

One plan can cover several products in the same category if their hazards, control points and limits are essentially the same. Andouille and smoked sausage can share a plan. Andouille and fresh bratwurst can't.

What the rule requires

9 CFR 417.2 What it asks for
(a) Hazard analysis The food safety hazards reasonably likely to occur, before, during and after entry into the plant, and the measures that control them; a flow chart of each process; the intended use or consumers
(c)(1)-(2) The hazards to be controlled and the critical control points for each
(c)(3) Critical limits at each CCP, designed to meet FSIS targets and performance standards
(c)(4) Monitoring procedures and how often they're done
(c)(5) Corrective actions for any deviation from a critical limit
(c)(6) Records of monitoring, holding the actual values and observations
(c)(7) Verification procedures and how often
(d) Signed and dated by the responsible person: at acceptance, at any change, and at least yearly

Section 417.4 adds validation when the plan is new, ongoing verification (calibrating instruments, watching the monitoring being done, reviewing records), and a reassessment at least once a year and whenever something changes: a new supplier, a new formula, a new smokehouse.

A plan for cooked, smoked sausage

A made-up inspected plant. The limits shown are its own, for the example.

CCP Critical limit Monitoring Corrective action
1 Cooking Internal temperature of 160°F Probe the coldest spot on each truck Keep cooking; record both readings; if it can't be reached, hold and evaluate
2 Cooling Within the times and temperatures in the plant's supporting document Probe at the times that document sets Hold the lot; evaluate against the document; record the decision

Where the numbers come from. A critical limit in a meat plan has to rest on something: an FSIS guideline, a published study, a process authority's letter. That's the plan's supporting documentation, and it's what validation checks. I haven't put cooling numbers here because they depend on the product and the document your plan cites. Take yours from that document, not from an example.

After cooking. Cooked sausage that's peeled, sliced or handled before it's sealed can pick up Listeria from the room. Plants control that with a Listeria program and sanitation, which sit beside the HACCP plan. It's on the worksheet as a step.

Cure. Cure is a restricted ingredient. This plant has a second person check the weight against the formula on every batch.

A week's log

Date Lot Reading Limit OK? Action
Nov 9, 11:40 AM AN-1109 andouille 161°F 160°F or above Yes
Nov 10, 11:15 AM SS-1110 smoked sausage 163°F 160°F or above Yes
Nov 12, 12:10 PM AN-1112 andouille 157°F 160°F or above NO: act Back in the house 25 minutes
Nov 12, 12:35 PM AN-1112, second reading 162°F 160°F or above Yes

The actual values are there, including the one that failed. That's what paragraph (c)(6) means. The row-by-row record for the house is in smokehouse log.

This is general information, not legal advice. Your inspector and FSIS have the last word. A retail shop that makes sausage for its own counter comes under the health department instead: see HACCP plan for a butcher shop. The inspection system is in USDA meat inspection requirements, and a plan for cured, smoked bacon in bacon HACCP plan.

Get the worksheet

Download the sausage HACCP plan worksheet. Three sheets and a read-me: a hazard analysis for cooked, smoked sausage step by step, the plan with its two CCPs and a place to sign, and a monitoring log that checks each reading. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers. Type your own limits over the example's.

Where this stops working

The plan and the logs prove each lot was cooked. When a supplier recalls a load of pork trim, the question changes: which lots used it, which customers got those lots, and how much is still in the cooler? The smokehouse log names the meat lots on each row. Finding one across three weeks of rows, and then matching to invoices, takes hours on the day there aren't any.

How TaroStack does it

TaroStack keeps the lot's ingredients, readings and customers on one record.

Receiving records the supplier's lot. Pork, trim, casings and cure each come in as lots with their dates.

Each batch notes what it used. Record a batch and the lots of meat and cure are taken from stock and noted on the batch record automatically. The sausage gets a lot code of its own.

Your readings are fields. Internal temperature, the time, the second reading, the cure check and initials go on the batch-record form, with sign-off.

On hold until it's reviewed. A lot on hold is out of what you can sell until someone releases it.

The recall report. From a supplier's lot to every batch that used it, the customers who got each one, and what's still on your shelves. A timed traceability drill is saved, and Home reminds you a month before a year passes without one.

The job Binder and logs In TaroStack
Meat lots in each batch Written on the log Noted on the batch automatically
CCP readings A log sheet Fields on the batch record
Waiting for review A hold tag On hold
Who got the lots that used that trim Logs against invoices The recall report

TaroStack doesn't write your HACCP plan, set a critical limit or replace the records FSIS requires. Recipes, batches, lots and recalls are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

What HACCP category is sausage?

It depends on the sausage. Fresh sausage is raw product, ground. Cooked, smoked sausage is fully cooked, not shelf stable. Dry sausage is in one of the shelf-stable categories.

What are the CCPs for smoked sausage?

Most plans have cooking and cooling. Some add others, such as metal detection. Each plant's hazard analysis decides.

How often does a HACCP plan have to be reassessed?

At least once a year, and whenever a change could affect the hazard analysis, under 9 CFR 417.4.

Sources

  1. 9 CFR 417.2: hazard analysis and HACCP plan (flow chart, processing categories, contents of the plan, signing and dating) · read November 19, 2026
  2. 9 CFR 417.4: validation, verification, reassessment (initial validation; calibration, observation and record review; reassessment at least annually) · read November 19, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.