A smokehouse log has one row for each truck of product that goes through the house. It records what the product is and which lots of meat and cure went into it, when it started, the house temperature, the internal temperature it reached and the time, the limit it had to reach, the weight that came out, and when it went into the cooler. The internal temperature against its limit is the line an inspector reads first. The log has to show the reading, show that it met the limit in your HACCP plan, and show what you did when it didn't. Below are the columns, a week with one failed reading, and a file.
The short version
- One row a truck, started when the product is loaded.
- Lots of meat and cure on every row.
- Internal temperature, the time it was reached, and the limit beside it.
- A reading under the limit gets its own row, and so does the reading after.
- Weigh in and weigh out. Yield is a control as well as a cost.
- TaroStack records each lot with the meat that went into it and holds it until it passes. More below.
What to record
| Column | Why |
|---|---|
| Date, lot, product | The lot code is the one on the package |
| Raw weight | The start of the yield sum |
| Meat lots, cure and its lot | A supplier's recall is traced through these |
| House and truck | A cold corner of one house shows up as a pattern |
| Started, house temperature | The schedule the product was on |
| Internal temperature reached, time | The reading itself, from the coldest spot |
| Internal limit | From that product's HACCP plan |
| Finished weight, yield | Dried too far or not far enough |
| Into the cooler | The start of cooling |
| Who | The person who took the reading |
A week
A made-up Louisiana smokehouse. The limits are the ones in its own plans.
| Date | Lot | Product | Raw | Reached | At | Limit | Check | Out | Yield |
|---|---|---|---|---|---|---|---|---|---|
| Nov 9 | AN-1109 | Andouille | 120 lb | 161°F | 11:40 AM | 160°F | OK | 98 lb | 82% |
| Nov 10 | SS-1110 | Smoked sausage | 150 lb | 163°F | 11:15 AM | 160°F | OK | 126 lb | 84% |
| Nov 11 | TL-1111 | Smoked turkey legs | 80 lb | 167°F | 10:35 AM | 165°F | OK | 61 lb | 76% |
| Nov 12 | AN-1112 | Andouille | 120 lb | 157°F | 12:10 PM | 160°F | KEEP COOKING | ||
| Nov 12 | AN-1112 | Andouille, second reading | 120 lb | 162°F | 12:35 PM | 160°F | OK | 97 lb | 81% |
The reading that failed
On Thursday the probe in the center link read 157°F at 12:10. The truck went back in. At 12:35 it read 162°F.
Both readings are on the log. That's the point. A sheet with only passing numbers either belongs to a house that never has a slow load, or to one that doesn't write down the first reading. An inspector knows which is more likely. The failed row with the passing row after it shows the limit is being used.
The same Thursday lot is worth a second look for another reason. It used a new lot of pork butt, PK-4490. If the next load from that lot is slow as well, the cause may be the meat (colder, bigger pieces, more water) and not the house.
Yield is a control too
Andouille came out at 82% and 81%, smoked sausage at 84%. Those are steady. A lot that comes out at 88% lost less water than usual and may be under-dried for its shelf life. One at 74% was overcooked, and you paid for the difference. Either way the number is free: it only takes two weighings.
What this log doesn't decide
The limits for cooking, and for how fast the product has to cool afterwards, come from your HACCP plan and the rules behind it. This log records against them. Worked plans are in bacon HACCP plan and jerky HACCP plan, and the inspection system in USDA meat inspection requirements. Check the probe against an ice bath before the day's first reading, and write that down as well.
Get the log
Download the smokehouse log. One row a truck; the cook check says OK or KEEP COOKING, and yield works itself out. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers. What a link costs to make is in how to price sausage.
Where this stops working
The log says AN-1112 was made from PK-4490. The supplier calls about PK-4490 three weeks later. Now the question is every lot that used it, where each one went, and what's still in the cooler. The smokehouse log has the first answer on four different pages, and none of the rest.
How TaroStack does it
TaroStack records the lot once and follows it out the door.
Each truck is a batch. Record it and the pork, the trim and the cure come off the lots you used. Those lots are noted on the batch record automatically, and the product goes into stock under its own lot code.
Your readings are fields. House temperature, internal temperature, the time, the second reading and initials go on the batch-record form, with sign-off.
On hold until it passes. A batch on hold is out of what you can sell until someone releases it.
Yield is recorded with every batch. Raw weight in, finished weight out. Recipe truth shows whether a product really yields what its recipe claims.
One report for a recall. From a supplier's lot to every batch that used it, the customers who got each one, and what's still on your shelves.
| The job | Smokehouse log | In TaroStack |
|---|---|---|
| Meat lots in this product | Written on the row | Noted on the batch automatically |
| Temperature readings | Columns on the sheet | Fields on the batch record |
| Not yet passed | A truck in the corner | On hold |
| Every lot that used PK-4490 | Read back through the sheets | One report |
TaroStack doesn't write your HACCP plan or set a limit. Recipes, batches, lots and recalls are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
