Skip to content

HACCP Plan for Pickles: Brine, Pack, Heat, pH

A HACCP plan for shelf-stable pickles: why the brine and the pack weight are control points, the heat step, equilibrium pH 4.6, records, and a worksheet.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 21, 2026 · 7 min read

A cucumber is a low-acid vegetable. A shelf-stable pickle is that cucumber made acid enough, all the way through, that botulism spores can't grow in a sealed jar at room temperature. The federal line is a finished equilibrium pH of 4.6, and a jar of vinegar pickles is the textbook acidified food. That makes the plan unusual: the control points are mostly about proportions. The brine has to be strong enough. The pack has to leave enough brine for the cucumbers in the jar, because a jar stuffed tighter has less acid for each ounce of vegetable. The heat step deals with what acid alone doesn't. And the pH is checked a day later, when the acid has had time to reach the middle of the cucumber. The limits come from a process authority, not from a recipe. Below are the rules, a plan for a made-up maker, and a worksheet.

The short version

  • Shelf-stable pickles are an acidified food: pH 4.6 or below, by law.
  • A process authority writes your scheduled process. You follow it and record that you did.
  • Brine strength and pack weight are critical factors. Weigh both.
  • Heat the jars as the process says.
  • Check equilibrium pH after 24 hours, on a blended jar, with a meter.
  • Refrigerated pickles are outside the acidified-food rule, and need the cold.

What the rule asks

For shelf-stable acidified foods, the federal rules ask a maker to do several things before and during production.

Requirement What it means
A scheduled process The recipe, pack, heat treatment and pH limit, set by a process authority
Registration and filing Register the plant, and file the process for each product and container size, on FDA's forms
A trained supervisor Someone who has completed an approved course oversees processing
Finished equilibrium pH 4.6 or lower Tested and recorded; with a pH meter above 4.0
Records pH and critical factors for each batch; deviations in a separate log; where each lot went; kept 3 years

How to get the letter is in process authority letter, and the business side in how to start a pickle business.

Not covered by that rule: pickles stored, shipped and sold under refrigeration. They're still food that can make people ill, and what keeps them safe is the cold and a short date. Fermented pickles make their own acid from the brine's bacteria. Whether yours falls under the acidified-food rule is a question for the process authority: ask before you assume.

The three points

A made-up maker of dill spears and bread and butter chips. Its process is invented for the example.

CCP Limit (this maker's scheduled process) Checked If it's missed
1 Brine and pack Brine 50% vinegar (5% acidity) by weight; no more than 60% cucumber by weight in a jar Brine weighed; three jars a batch weighed before and after brine Remake the brine; repack before capping
2 Heat treatment Coldest jar's center at 180°F for 10 minutes Water temperature, time, a probe jar Reprocess at once, or refrigerate and evaluate
3 Equilibrium pH 4.1 or below (legal ceiling 4.6), no sooner than 24 hours after packing Meter, one blended jar a batch Hold; call the process authority; log the deviation

The pack is the one people miss. A jar holds a fixed volume. Every extra cucumber slice pushes out brine. At 60% cucumber the brine brings the whole jar to pH 3.9. At 70% the same brine may only reach 4.3. Chips pack tighter than spears, which is how a jar of chips can read pH 4.4 when the spears always read 3.9: same brine, same vinegar, different pH. Weigh the jars.

Vinegar strength. The process assumes 5% acidity. Vinegar is sold at several strengths, and a 4% vinegar weakens every jar by a fifth. Read the label of every delivery.

Equilibrium. On packing day the brine reads very acid and the middle of the cucumber doesn't. The rule's number is the pH after they've evened out. Blend a whole jar, solids and liquid, and measure that. Calibrate the meter with pH 4 and pH 7 buffers on the day. The method is in pH testing for acidified foods.

Hold until it passes. Nothing ships until the batch's pH is recorded and under the limit.

A few days of readings

When Batch Check Reading Limit OK?
Nov 16, 9:10 AM DP-1116 dill spears Cucumber share 58% 60% or less Yes
Nov 16, 10:40 AM DP-1116 dill spears Heat treatment 182°F 180°F or above Yes
Nov 17, 11:00 AM DP-1116 dill spears Equilibrium pH 3.9 4.1 or lower Yes
Nov 18, 9:20 AM BB-1118 bread and butter Cucumber share 64% 60% or less NO: act
Nov 19, 11:15 AM BB-1118 bread and butter Equilibrium pH 4.0 4.1 or lower Yes

On the 18th the first jar of chips weighed in at 64% cucumber. Six jars already capped were opened, repacked and refilled, and the fill line on the packing gauge was lowered for chips. The batch read 4.0 the next day. Caught at the scale, it cost twenty minutes. Caught at the pH meter, it would have been the whole batch on hold.

This is general information, not legal advice. A process authority and your regulator have the last word. The same rule from a sauce maker's side is in HACCP plan for tomato sauce, and how the two kinds of food differ in acid food vs acidified food. How long a jar keeps is in pickles shelf life.

Get the worksheet

Download the pickle HACCP plan worksheet. Three sheets and a read-me: the hazard analysis from receiving to shipping, the plan with its three control points, and a monitoring log that checks each reading. Put your own process limits in place of the example's. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

Three years of batch records, a separate deviation log, and a record of where each lot first went. On paper that's three binders. When an inspector picks lot DP-1116 and asks for its pack weights, its heat treatment, its pH and the stores it went to, the answer is in all three, and in the invoice file.

How TaroStack does it

TaroStack keeps the batch's readings, its ingredients and its customers on one record.

Each batch has a lot code. Recording it takes the cucumbers, vinegar and jars from stock and notes which lots were consumed, automatically: the vinegar's lot is there if its strength is ever in question.

Your critical factors are fields on the batch record: pack weights, water bath temperature and time, equilibrium pH, initials and a sign-off. The form prints with your own checklist.

A batch on hold stays out of what you can sell until the pH is recorded and someone releases it.

The recipe is versioned, in grams. The one the process authority reviewed is the one the batch is made from.

One report for a recall or an inspection: which supplier lots went into which batches, and which customers got them.

The rule asks for Three binders In TaroStack
pH and critical factors by batch The batch binder Fields on the batch record
Hold until the pH passes A sign on the pallet On hold: not for sale
Where each lot first went The invoice file One report
Which vinegar was in it Unknown On the batch record

TaroStack doesn't write your scheduled process, file with FDA or act as a process authority. Recipes, batches, lots and recalls are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

Are pickles an acidified food?

Shelf-stable pickles made by adding vinegar to cucumbers are: a low-acid food with acid added, with a finished equilibrium pH of 4.6 or below. Pickles kept refrigerated from maker to shelf are outside that rule.

What pH do pickles need to be?

The legal ceiling for a shelf-stable acidified food is a finished equilibrium pH of 4.6. A scheduled process sets a lower working limit: 4.1 in this example.

What are the critical control points for pickles?

The brine's strength and the pack weight, the heat treatment, and the equilibrium pH check before release.

Sources

  1. 21 CFR 114.3 (acid and acidified foods defined; refrigerated foods excluded; scheduled process) · read November 20, 2026
  2. 21 CFR 114.80 (finished equilibrium pH 4.6 or lower; a pH meter above 4.0) and 114.100 (records, deviations, kept 3 years) · read November 19, 2026
  3. 21 CFR 108.25(c) (registration on Form FDA 2541 and filing of the scheduled process) and 114.10 (a supervisor who completed an approved school) · read October 18, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.