Drying fruit preserves it. It doesn't clean it. A dehydrator running at 135°F takes water out slowly, and bacteria that came in on the fruit can survive the trip and sit in the dried slices for months. So a dried fruit plan has four points. Washing the fruit before it's cut. Drying to a measured water activity, because mold decides by the number and not by how the slice feels. The sulfite declaration, if the fruit is sulfured or bought sulfured: at 10 parts per million or more in the finished food, it goes on the label. And pits, stems and metal from the cutting. A maker selling to shops generally needs this written down as a food safety plan. Below are the hazards, the points, a week's log, and a worksheet.
The short version
- A dehydrator dries. Unless a heat step is proven to kill, treat it as no kill step.
- Wash whole fruit before cutting, with a sanitizer in the water at its label strength.
- Measure water activity on every batch. Don't judge by feel.
- Sulfites at 10 ppm or more in the finished fruit are declared.
- Pits and slicer blades are the physical hazards. Check for both.
- TaroStack keeps each dryer load as a batch, with its reading and its fruit lot. More below.
The hazards
| Hazard | Where it comes from | Why drying doesn't settle it |
|---|---|---|
| Salmonella, E. coli, Listeria | The orchard, the packing shed, hands | Low-temperature drying doesn't reliably kill them, and they survive dry for months |
| Mold and yeast | Fruit not dried enough, or damp again after packing | They grow once there's enough available water |
| Undeclared sulfites | A sulfur or metabisulfite dip; sulfured fruit bought in | Some people react to sulfites, and the label is their only warning |
| Pits, stems, metal | Pitting and slicing | Nothing after the slicer removes them |
| Undeclared allergens | Nuts or coconut packed on the same table | Similar bags, shared scoops |
The four points
A made-up maker of dried mango, apple and apricot. Its limits are its own.
| CCP | Limit | Checked | If it's missed |
|---|---|---|---|
| 1 Washing | Whole fruit washed before cutting; sanitizer at the strength on its label | Test strip, each tank and each hour | Tank remade; fruit washed again |
| 2 Drying | Water activity 0.60 or below | Meter, each dryer load, thickest pieces | Back in the dryer; retested |
| 3 Pits and metal | Every slice over the inspection table; slicer blades whole at the start and end | Each load | Load held and re-inspected |
| 4 Label | The right label on each fruit; sulfites declared where the finished fruit has 10 ppm or more | First and last bag of each run | Held and relabeled |
No kill step, unless you add one. A blanch or steam step before drying can be a kill step if someone qualified has shown that your time and temperature do the job. Without one, safety rests on clean fruit, clean water and clean hands, and on buying from growers you've approved.
Why wash water has sanitizer in it. The sanitizer isn't there to sterilize the fruit. It keeps the water from carrying what's on one mango to the next two hundred.
Water activity. Below about 0.60, no mold or yeast grows. Measure the thickest, dampest-looking pieces of each load, because they're the last to dry. Soft, moist dried fruit is sold above that number and relies on a preservative or its packaging: if that's your product, have the limit set by someone qualified and write down why. What the number means is in water activity for food makers.
Sulfites. Sulfur dioxide keeps apricots orange and apples pale. FDA's rule treats a sulfiting agent as detectable at 10 parts per million or more in the finished food, and at that level it's declared in the ingredient list. That applies to sulfured fruit you buy and repack as much as to fruit you sulfur yourself: ask the supplier for the level, or have a lab measure it.
A week's log
| Day | Batch | Check | Reading | Limit | OK? |
|---|---|---|---|---|---|
| Mon | Wash tank 1 | Sanitizer strip | In range | Label strength | Yes |
| Mon | Mango DM-1116 | Water activity | 0.55 | 0.60 or below | Yes |
| Tue | Apple DA-1117 | Water activity | 0.58 | 0.60 or below | Yes |
| Wed | Mango DM-1118 | Water activity | 0.68 | 0.60 or below | NO: act |
| Thu | Mango DM-1118 | Water activity, retest | 0.56 | 0.60 or below | Yes |
Wednesday's mango read 0.68. The slices had been cut thicker than the recipe's 6 mm, and the load came out on the usual timer. It went back in for four hours and read 0.56 on Thursday. That reading is what stops a bag that would grow mold in a shop from leaving.
This is general information, not legal advice. Some states allow dried fruit under their cottage food laws and some don't: check yours. Foreign matter is covered in foreign material control program, allergens in allergen control plan template, and the business side in is selling dried fruit profitable.
Get the worksheet
Download the dried fruit HACCP worksheet. Three sheets and a read-me: the hazard analysis from receiving fruit to labeling, the plan with its four control points, and a monitoring log. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
A shop reports mold in a bag, three weeks after packing. Which dryer load was that bag from, what did it read, and which other shops have bags from the same load? If the bag has no code, or the code leads to a page that says "mango, Tuesday", every bag of mango in every shop is in question.
How TaroStack does it
TaroStack makes each dryer load a batch you can find again.
Each load is a batch with a lot code and a best-by date, and lot labels print with both.
Your checks are fields on the batch record: sanitizer strip, water activity, blades whole, initials.
The batch notes which fruit lots it used, automatically, so a grower's problem leads to the loads it went into.
One report for a recall: which shops got that lot, how many bags, and what's still on your shelf. Starting a recall holds the rest.
Allergens on Growth. With allergen tracking on, a batch can't start if its label leaves out an allergen its ingredients contain.
| The moldy bag | Paper | In TaroStack |
|---|---|---|
| Which load it came from | "Mango, Tuesday" | The lot code on the bag |
| What that load read | A clipboard, if it was filled in | On the batch record |
| Which shops have the rest | Invoices | One report |
| Bags of it still here | Look | Stock by lot, on hold |
TaroStack doesn't measure water activity or test for sulfites. Recipes, batches, lots and recalls are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes, with allergen tracking). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
