Skip to content

Dehydrator Log Sheet: Time, Temperature, Yield, Dryness

A free dehydrator log sheet for dried fruit, herbs and jerky makers: raw and dried weight, set temperature, hours, yield worked out, and a dryness check.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 19, 2026 · 5 min read

A dehydrator log sheet records each load on one row: the date and batch, the product, the raw weight, the number of trays, the temperature the machine was set to, when it started and ended, the dried weight, and a water activity reading if you have a meter. The sheet works out the yield, dried weight over raw weight. Yield is your cost and your warning light in one number. Apple chips that usually come out at 14% and today come out at 16% aren't a bonus. They're not dry. Here's the log with four rows filled in, and the file.

The short version

  • Weigh every load raw and dried, in the same unit.
  • Write the set temperature and the hours. They're the recipe for next time.
  • Yield is dried over raw. Know each product's usual figure.
  • A higher yield than usual means more time, not more product.
  • TaroStack records each load as a batch with a lot and shows the yield against the recipe. More below.

An example: apples and mango

Central Valley Dried Fruit Co. is a made-up Fresno maker I use in these examples. Eighteen trays a load at 135°F:

Batch Product Raw Hours Dried Yield Water activity Check
AC-1109 Apple chips 42 lb 10 6.0 lb 14.3% 0.42 OK
MG-1110 Mango slices 62 lb 14 3.75 lb 6.0% 0.55 OK
AC-1111 Apple chips 42 lb 9 6.9 lb 16.4% 0.61 KEEP DRYING
AC-1111 Apple chips, after 2 more hours 42 lb 2 6.1 lb 14.5% 0.44 OK

Reading it

The usual yield for apple chips here is about 14%. AC-1109 turned 42 lb of apples into 6.0 lb of chips. That's the number the business prices from: a 2 oz bag takes 14 oz of apples.

AC-1111 was pulled an hour early. Nine hours, not ten, and it weighed 6.9 lb, a yield of 16.4%. The extra 0.9 lb is water. The meter agreed: 0.61, over this maker's limit of 0.60. Two more hours brought it to 6.1 lb and 0.44. Both rows are on the sheet under one batch number, so the record shows the load was checked, failed, and finished.

Mango's 6% isn't a mistake. The raw weight is whole fruit, and the peel and the pit come off before the trays. The note on the row says so. Decide whether you weigh before or after trimming, and do it the same way every time, or your yields can't be compared.

No meter? Leave the water activity column empty and lean on yield. If your apples always land between 14 and 14.5% when they're crisp, 16% is a no. A meter is worth owning once you sell to stores, and what the readings mean is in water activity for food makers.

The 0.60 limit is on a second sheet, and it's this maker's own. Jerky and other meat have rules beyond dryness: a dehydrator alone may not get meat hot enough, and that belongs in a jerky HACCP plan, not on this log.

Lots and labels

The batch number doubles as the lot: AC-1109 goes on every bag from that load. For fruit you buy in, write the grower's name and their lot or pick date in your receiving record, so a bag leads back to the load and the load to the orchard.

Get the sheet

Download the dehydrator log sheet. The log, with yield and the dryness check worked out, your limit on its own sheet, and a read-me. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

The log is a record of loads. It doesn't know how many pounds of apples are in the cooler, how many bags are left, or that Thursday's wholesale order needs 120 bags of chips and you've dried enough for 90.

How TaroStack does it

TaroStack joins the load to the stock on either side of it.

A product is a recipe with a yield. Apple chips: 14 oz of apples and a bag for every 2 oz of chips. Record a batch and the apples and bags come off stock, from the lot that's due first, and the chips go in under their own lot with a best-by date.

It checks the recipe against real loads. From your own batch history, TaroStack shows whether a recipe yields what it claims and which ingredient's quantity is off. A product drifting from 14% to 16% is visible before a shop complains.

Your readings on the batch. Set temperature, hours, dried weight and water activity are fields of your own on the batch record, with initials.

What can I make? "What could I make right now" answers the Thursday question: how many bags the apples and packaging on hand allow.

The job Log sheet In TaroStack
Yield, load after load Compare rows by eye Shown against the recipe
Apples and bags left A separate count Come off with the batch
Enough for Thursday's order? Arithmetic Shown for you
Which orchard is in this bag Two binders The lot's trace

Recipes, batches and lots are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

What should I record when dehydrating food to sell?

The date, the product, raw and dried weight, the temperature and time, a dryness check, the lot, and who did it.

How do you calculate dehydrating yield?

Divide the dried weight by the raw weight. 6.0 lb from 42 lb is 14.3%. More on the arithmetic in batch yield formula.

Is selling dried fruit worth it?

It can be, if you price from your real yield. The numbers for this example are in is selling dried fruit profitable, and the plan in dried fruit business plan.

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.