Skip to content

cGMP Requirements for Raw Materials: 21 CFR 117.80(b)

The cGMP requirements for raw materials in food, paragraph by paragraph: inspect, segregate, store, hold, identify allergens and rework, with a checklist.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 21, 2026 · 7 min read

FDA's current good manufacturing practice rule for human food has one paragraph about raw materials and other ingredients, 21 CFR 117.80(b), and it has eight numbered points. In plain words: look at what comes in and keep apart anything that isn't fit to use; store it so it doesn't get contaminated, pick up an allergen, or go off; hold it in suitable containers at a suitable temperature and humidity; keep frozen things frozen; mark rework as rework; and identify allergens and hold them so they can't get into anything else. None of it names a form or a frequency. That's left to the plant. Below is the paragraph taken apart, what each piece looks like on a small floor, and a checklist with room to write how you do it. The practices are a made-up bakery plant's own. Read the full text before relying on a summary.

The short version

  • Inspect every delivery, and segregate what's doubtful until it's decided.
  • Store ingredients so they're protected from contamination and from allergen cross-contact.
  • Hold them in closed, suitable containers at a temperature and humidity that keep them sound.
  • Ingredients that can carry toxins, pests or foreign matter have to meet FDA's rules before use.
  • Keep frozen ingredients frozen, and thaw so nothing spoils.
  • Identify rework as rework. Identify allergens, and hold them apart.
  • TaroStack records each delivery as a lot, with holds and your own checks. More below.

The paragraph, piece by piece

What 117.80(b) says, shortened On a small floor
(1) Inspected and segregated or otherwise handled as necessary to ascertain that they're clean and suitable for processing. Stored under conditions that protect against allergen cross-contact and contamination and minimize deterioration. Washed or cleaned as necessary. Water used is safe Every delivery is looked at before it's put away. Doubtful pallets go to a marked hold area. Ingredients are off the floor, covered, oldest in front
(2) Must not contain levels of microorganisms that may make the food injurious, or must be pasteurized or otherwise treated during manufacturing so they no longer do Know which ingredients arrive carrying a risk, and which step of yours deals with it
(3) Those susceptible to aflatoxin or other natural toxins must comply with FDA regulations before they're incorporated Nuts, grains and spices come with the supplier's test result or guarantee for the lot
(4) Those susceptible to pests, undesirable microorganisms or extraneous material must comply with applicable FDA regulations Supplier specifications on file. Sieving, sorting or magnets where they're needed
(5) Held in bulk or in containers that protect against allergen cross-contact and contamination, at a temperature and relative humidity that prevent adulteration. Material scheduled for rework is identified as such Bins with lids and labels. Store room temperatures checked. A tag on every tub of rework
(6) Frozen raw materials kept frozen. Thawing, if required, done in a manner that prevents adulteration The freezer is checked daily. Thawing happens in the cooler
(7) Liquid or dry raw materials received and stored in bulk are held in a manner that protects against allergen cross-contact and contamination Silos, totes and tanks are closed, labeled and on the cleaning schedule
(8) Raw materials that are food allergens, and rework that contains them, are identified and held in a manner that prevents allergen cross-contact The allergen is on every container. Dedicated scoops. Allergens stored below and apart

The left column is the rule. The right column is one plant's way of meeting it, and there are others.

Four things to check first

The hold area. "Segregated" needs somewhere to segregate to. A taped square on the floor with a sign does it, as long as what's in it has a tag saying why and since when. A pallet that's on hold only in the receiver's memory isn't.

Labels on everything opened. A sack decanted into a bin loses its label unless someone transfers it. The bin needs the ingredient's name, the supplier's lot, the date it was opened, and its allergen. That's paragraph (8) and it's also the only way a recall of that lot can be acted on.

Rework. An unlabeled tub of yesterday's dough was this plant's own finding. The rule says material scheduled for rework is "identified as such". This plant's tag says what it is, the batch it came from, the date, the allergens in it, and what it may go back into. Rework that contains an allergen gets the same care as the allergen. More on handling it is in spoilage, rework and scrap.

Where allergens sit. Below and apart. A bag of almond flour on a shelf above the oat bins is a cross-contact finding waiting for a tear in the bag. A map of what's stored where, with the allergens marked, takes an hour to draw: see allergen matrix template.

What the paragraph doesn't say

It doesn't say how to inspect, how often to check a temperature, or what to write down. Three other places fill that in.

  • Your own procedures. Write what "inspected" means at your door: seals intact, no pests, right item, temperature for chilled and frozen goods, the lot recorded. A log for it is in food receiving log template.
  • The supply-chain program, for plants that have to have one. Where your hazard analysis finds a hazard that the supplier controls before the ingredient reaches you, a separate part of the rule asks for approved suppliers and verification, and says the hazard analysis and the supplier's performance are among the things to consider. See supply chain program and supplier approval program template.
  • Testing, where it's needed: raw material testing in food.

A wider checklist for the whole plant is in GMP checklist. This is general information, not legal advice. Which parts of the rule apply to a very small business, a farm or a facility under another regulation is a question for FDA or your State regulator.

Get the checklist

Download the raw materials checklist. One sheet and a read-me: each piece of 21 CFR 117.80(b), what it looks like on a small floor, and columns for how you do it, the record you keep, and a tick. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

A checklist shows the system exists. The auditor's next move is to test it: pick a bin, read the lot on its label, and ask when that lot arrived, whether anything was noted at receiving, what's been made from it, and how much is left. On paper that's the receiving log, the bin label, a stack of batch sheets and a count, and any one of them can be missing.

How TaroStack does it

TaroStack keeps the lot from the door to the batch.

Receiving records the supplier's lot and dates. Scanning a GS1-128 case label fills them in, and your own fields on the receipt hold the checks: seal, temperature, initials.

Holds and quarantine keep a doubtful lot out of what can be used until you release it.

Each batch notes which lots it used, automatically.

Allergen tracking, on Growth: ingredients carry their allergens, and a batch can't start if its label leaves out an allergen its ingredients contain.

First-expired-first-out by default, and one report from any lot to the batches and customers it reached.

The auditor asks Paper In TaroStack
When did this lot arrive The receiving log On the lot
Was it checked A tick, if made Fields on the receipt
What was made from it Batch sheets The batches that used it
How much is left Count it Stock by lot

TaroStack doesn't write your procedures or make a plant compliant: it keeps the records. Lots, holds and receiving are on every plan, from $9.99 a month (50 items) or $39 a month (3,000 items, with allergen tracking). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

What are the GMP requirements for raw materials?

Under 21 CFR 117.80(b): inspect and segregate them as needed, store them protected from contamination and allergen cross-contact, hold them in suitable containers at suitable temperature and humidity, keep frozen materials frozen, identify rework, and identify and separate allergens.

How should allergen ingredients be stored?

The rule says they're identified and held in a manner that prevents allergen cross-contact. This example's plant labels every container with its allergen and stores allergens below and apart from other ingredients.

Does rework need a label?

Material scheduled for rework has to be identified as such, and rework that contains a food allergen is identified and held so it can't cross-contact other food.

Sources

  1. 21 CFR 117.80: processes and controls; paragraph (b), raw materials and other ingredients · read November 21, 2026
  2. 21 CFR 117.410: the supply-chain program; what is considered in approving suppliers · read November 21, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.