A wine label is designed last and regulated first. Before a winery bottles, the label has to carry what 27 CFR part 4 requires, the government warning from 27 CFR part 16, and it needs a certificate of label approval from the Alcohol and Tobacco Tax and Trade Bureau (TTB). Part 4 covers wine of 7 to 24 percent alcohol by volume. The required list is short. Two things go on the brand label, three can go on any label, and a few statements apply only when something is in the wine. Below is each with its section, the alcohol content rule that trips people at 14 percent, a checklist, and what a label can't tell you later.
The short version
- On the brand label: the brand name, and the class or type.
- On any label: the bottler's name and address, net contents, and alcohol content.
- Above 14 percent, alcohol content must be stated. At 14 or less, "table wine" can stand in for it.
- "Contains sulfites" at 10 parts per million or more.
- The government warning, word for word, at a set size.
- Get the certificate of label approval before bottling.
- TaroStack records which lots went into each bottling. More below.
What must be on the label
| What | Where | The rule |
|---|---|---|
| Brand name | Brand label | 27 CFR 4.32(a)(1) |
| Class, type or other designation | Brand label | 27 CFR 4.32(a)(2) |
| Name and address | Any label | 27 CFR 4.32(b)(1) |
| Net contents | Any label | 27 CFR 4.32(b)(2) |
| Alcohol content | Any label | 27 CFR 4.32(b)(3), 4.36 |
| "Contains sulfites" | Front, back, strip or neck label | 27 CFR 4.32(e) |
| FD&C Yellow No. 5; cochineal extract or carmine | Where used | 27 CFR 4.32(c), (d) |
| Health warning statement | Brand, front, back or side label | 27 CFR 16.21 |
Each line points to a longer section: brand names in 4.33, class and type in 4.34, name and address in 4.35, net contents in 4.37. Vintage, appellation and varietal names have rules of their own in part 4 that this page doesn't cover.
Alcohol content, and the 14 percent line
| The wine | What the label does | Tolerance |
|---|---|---|
| More than 14 percent | States the alcohol content | 1 percent either way |
| 14 percent or less | States it, or says "table wine" or "light wine" instead | 1.5 percent either way |
So a wine at 14.2 percent can't use "table wine" in place of a number: it's over 14, and the content must be stated. A wine at 13.5 percent may print the number or the words. The statement is in terms of percentage of alcohol by volume, as "Alcohol __% by volume" or a similar phrase, with "alc." and "vol." as the abbreviations (27 CFR 4.36).
Sulfites
The statement "Contains sulfites", or one naming the sulfiting agent, is required where sulfur dioxide or a sulfiting agent is detected at 10 or more parts per million, measured as total sulfur dioxide (27 CFR 4.32(e)). More on the declaration is in sulfites labeling.
The warning
GOVERNMENT WARNING: (1) According to the Surgeon General, women should not drink alcoholic beverages during pregnancy because of the risk of birth defects. (2) Consumption of alcoholic beverages impairs your ability to drive a car or operate machinery, and may cause health problems.
It appears separate and apart from all other information. "GOVERNMENT WARNING" is in capitals and bold, the rest isn't bold, and the type is at least 2 mm on a container over 237 mL and up to 3 liters, which covers a 750 mL bottle (27 CFR 16.22).
Label approval
No one may bottle or pack wine, or remove it from the plant where it was bottled, without an approved certificate of label approval on TTB Form 5100.31 (27 CFR 4.50). A bottler whose wine won't be sold or shipped in interstate or foreign commerce can apply, on the same form, for a certificate of exemption. Your State's alcohol agency has rules as well.
This is general information, not legal advice. Wine under 7 percent alcohol is outside part 4: see cider label requirements. The cellar's records are in wine making log sheet, and stock in winery inventory spreadsheet.
Get the checklist
Download the wine label checklist. One sheet and a read-me: each thing the label carries, its section, a made-up example and a column to tick for your own label. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
The label says 13.5 percent and "Contains sulfites". Those are claims about what's in the bottle, and what's in the bottle is a blend of three tanks, sulfured twice. Two years on, when a distributor asks about lot L26318, the approved label is in a folder and the answers are in the cellar book: which tanks, which additions, how many cases, shipped where.
How TaroStack does it
TaroStack keeps the record behind the label.
Each bottling is a batch. Record it and the wine, bottles, corks and labels come off stock. The batch notes which lots it used, automatically.
Your checks are fields on the batch record: alcohol, free and total sulfur dioxide, the label version, the approval's number.
Every bottling is a lot, and what ships is recorded by lot.
One report for a lot: which tanks and additions went in, which customers got it, and what's left. Starting a recall holds it.
| The distributor's question | Cellar book and folders | In TaroStack |
|---|---|---|
| Which tanks went into L26318 | Read back through the book | The lots on the batch |
| What was added, and how much | The additions page | The batch record |
| How many cases, shipped where | Invoices | One report |
| What's left in the warehouse | Count | Stock by lot |
TaroStack doesn't design labels, apply for label approval or file anything with TTB. It doesn't file TTB reports. Recipes, batches, lots and recalls are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
