A kitchen checklist earns its place when each line has a standard beside it. "Check coolers" gets a tick whatever the cooler reads. "Read every cooler: 41°F or below, write the reading" gets a number, and a number that's wrong gets noticed. So this checklist has two sheets, opening and closing, twelve tasks each, and every task has its standard: 41°F for cold, 135°F for hot, seven days for date labels, sanitizer at the strength on its label. Each line is initialed with the time. Opening is about finding what went wrong overnight before any food is made. Closing is about putting food away so that nothing can. Below are both lists and a file to print.
The short version
- A standard beside every task, and a reading where there's something to read.
- Opening: coolers, last night's cooled food, date labels, sanitizer, thermometer.
- Closing: cool or discard, label and date, coolers again, clean, lock up.
- Initials and a time on every line.
- A warm cooler found at 6 AM is a morning's problem. Found at noon, it's a day's food.
- TaroStack dates everything you make and flags what's about to expire. More below.
Opening
| Task | Standard |
|---|---|
| Wash hands; check the hand sinks | Hot water, soap and paper towels at every one |
| Read every cooler | 41°F or below. Write the reading |
| Read every freezer | Food frozen solid. Write the reading |
| Look at what was cooled overnight | At 41°F or below; anything that isn't goes to the chef |
| Check the date labels | Nothing past its date, nothing ready-to-eat older than 7 days, nothing undated |
| Mix sanitizer and test it | At the strength on its label, by test strip. Write the reading |
| Set up the dish machine | Rinse or sanitizer reading as the machine's plate says |
| Check the probe thermometer | 32°F in ice water; adjust or replace |
| Turn on hot holding and wait | At temperature before food goes in; food held at 135°F or above |
| Check today's deliveries | Who's receiving; refrigerated food at 41°F or below on arrival |
| Look for signs of pests | Tell the manager before prep starts |
| Ask about illness | Anyone with vomiting or diarrhea tells the manager and doesn't handle food |
Why coolers come second. Everything in a kitchen depends on the cold holding having held. If the walk-in reads 46°F at opening, the question is how long, and the answer decides what's thrown away. A reading written at close and another at open bracket the night. Without both, the honest answer is "unknown", and unknown means discard.
Why the thermometer is on the list. Every other temperature on the sheet is only as good as the probe. Ice water takes a minute. A log for it is in thermometer calibration log.
Closing
| Task | Standard |
|---|---|
| Cool what's left, or throw it away | On the cooling log: 135°F to 70°F in 2 hours, to 41°F in 6 in all |
| Label and date everything going into the cooler | Name, date made, use-by |
| Cover and store food off the floor | Raw meat below ready-to-eat food |
| Read every cooler and freezer again | 41°F or below. Write the reading |
| Filter or change fryer oil | On the fryer oil log |
| Clean and sanitize food-contact surfaces | Boards, slicer, prep tables, can opener |
| Empty and clean the dish machine | Drain, clean the screens, leave the door open |
| Empty sanitizer buckets | Fresh in the morning |
| Take out trash; clean the floor drains | Lids on the outside bins |
| Turn off or turn down equipment | Fryers, ovens, hot wells, hoods |
| Lock the walk-in, the back door and the chemicals | |
| Note anything broken | On the board for the morning |
The first line is the dangerous one. A pot of soup put in the walk-in with the lid on at 10 PM is the commonest way a kitchen makes someone ill. Closing is when people are tired and the cooling log is skipped. The limits and the methods that meet them are in critical limits for cooling.
The label is for the opener. Whoever closes knows the soup was made today. Whoever opens on Thursday doesn't. Seven days is counted from the day it was made, and only a label carries that.
Making it stick
Initials and a time, not a tick. A column of ticks in one pen was filled in at the end. Initials with times that climb down the page were done as the work was.
The manager reads yesterday's sheet. Every day, for one minute. A sheet nobody reads stops being filled in within a fortnight.
Change the list to fit. These twenty-four lines are one kitchen's. Add your smoker, your sushi rice, your allergen station. Take out what you don't have. The numbers come from the FDA Food Code as I read it; your state or county may use an older edition or its own figures, so check yours. This is general information, not legal advice. All of the code's limits are in one table in critical limits for CCPs.
Get the checklist
Download the opening and closing checklist. Two sheets to print, each with a column for initials and time, and a read-me. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers. What an inspector looks at is in commercial kitchen inspection checklist, and the oil line in fryer oil log sheet.
Where this stops working
"Check the date labels" takes ten minutes when there are thirty containers and the labels are legible. With eighty, in two walk-ins, written by five people, it gets a tick and a glance. The checklist can tell someone to look. It can't know what's in there.
How TaroStack does it
TaroStack knows what's in the cooler and how old it is.
Everything made ahead is a batch with a date. Record it and it's in stock with a lot code and a use-by. Lot labels print with both, so the label is legible and right.
An alert before a date passes. Lots close to their date are flagged with their value, so the opener's label check is a short list, not a search.
First expired, first out. The oldest lot is used first by default.
Your readings go on the batch. Cooking and cooling temperatures are fields on the batch record, with initials.
Counting on a phone, with no signal. The walk-in count works offline and catches up afterwards.
| The job | Checklist | In TaroStack |
|---|---|---|
| Date on every container | Tape and a marker | A printed lot label |
| What's past its date | Read every label | An alert |
| Which to use first | Whichever is in front | First expired, first out |
| Cooling readings | A clipboard | Fields on the batch |
TaroStack doesn't read a cooler or replace the checklist. Lots, expiry and batches are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
