Skip to content

Master Manufacturing Record: What 21 CFR 111 Asks For

What a master manufacturing record must include for a dietary supplement under 21 CFR 111.210, part by part, with a worked example and an outline to fill in.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 21, 2026 · 7 min read

A master manufacturing record is the written instruction for making one dietary supplement at one batch size. The federal rule for supplement makers, 21 CFR part 111, requires one for each unique formulation and each batch size, and says what goes in it: the product's name and strength, a complete list of components and the weight of each, what will be declared on the label, any intentional overage, the theoretical yield with the limits that trigger an investigation, the packaging and label, and written instructions with specifications, sampling, verification steps, precautions and corrective actions. It's the master. Every batch you make is then recorded on its own batch production record, which follows it. The point is that batch 40 is made the way batch 1 was. Below is each required part in plain words, with an example for a made-up capsule maker, and an outline to fill in.

The short version

  • One master record for each formulation and each batch size.
  • Components by exact weight, with what the label will declare.
  • Say any overage, and why.
  • Give a theoretical yield and the range outside which you investigate.
  • Instructions specific enough that two people would make the same batch.
  • Manual weighing and adding: one person does it, another verifies.
  • TaroStack holds the formula as a versioned recipe and records each batch against it. More below.

What it must include

Part The rule asks for (21 CFR 111.210) The example
Product (a) Name; strength or measure of each dietary ingredient; batch size Elderberry Extract 500 mg capsules; 10,000 capsules
Components (b) A complete list Extract powder, rice flour, size 0 vegetable capsules
Amounts (c) The weight or measure of each Extract 5.100 kg; rice flour 1.400 kg; capsules 10,200
Label identity (d) Each dietary ingredient on the Supplement Facts label, and each ingredient on the ingredients list Elderberry fruit extract 500 mg; rice flour; vegetable capsule
Overage (e) Any intentional overage 2% of extract, 0.100 kg
Yield (f) Theoretical yield at each controlled step and at the end, with maximum and minimum percentages 10,000 capsules; investigate below 95% or above 102%
Packaging and label (g) A description and a representative label, or where it's kept 60 in a 150 cc amber bottle; label EB-500 rev C attached
Instructions (h) Specifications, sampling and tests, actions and verification, precautions, corrective actions Below

The parts people get wrong

"For each batch size." A 10,000 capsule batch and a 50,000 capsule batch are two master records, even with the same formula. Equipment, blend times and yields differ. Don't write one record and scale it in your head.

Overage. If you add 2% extra of an ingredient so the label claim holds to the end of shelf life, the record says so and by how much. An unexplained 5.100 kg where the sum says 5.000 looks like a weighing error.

Yield, with limits. Theoretical yield is what perfect production would give: 10,000 capsules. Real yield is always a little different, and the record sets the range you'll accept, here 95% to 102%. Below it, where did the powder go? Above it, how did you make more capsules than the ingredients allow: are they underfilled? Either way the batch is held and looked at, and the record says that's what happens.

The representative label. The actual label, or a specimen, is part of the record, or the record says exactly where it is. "The current label" isn't a reference. "EB-500 rev C" is.

The instructions

Section (h) is where a recipe becomes a manufacturing record. It asks for five things.

The rule asks for The example
(1) Specifications for each point where control is necessary Identity confirmed before weighing; blend 15 minutes; filled capsule 740 mg, within 5%; 60 a bottle
(2) Sampling, with a cross-reference to tests 20 capsules weighed every 15 minutes; finished batch sampled for the tests in SPEC-EB-500
(3) Actions to perform and verify each point See below
(4) Special notations and precautions Dust mask; line cleared of the previous product, clearance initialed
(5) Corrective action plans Weight out of range: stop, adjust, segregate since the last good check. Yield out of range: hold for review

The two-person rule. For manual operations the rule is specific: one person weighs or measures a component and another verifies the weight; one person adds the component and another verifies the addition. The master record builds that in, as two sets of initials on every weighing and every addition. A one-person operation has to think hard about how it meets this, and it's a question for whoever advises you on compliance.

The master and the batch record

Master manufacturing record Batch production record
How many One for each formulation and batch size One for every batch made
Contains The instructions and specifications What actually happened: lots, weights, initials, results
Changes Under control, with a new revision Never, once the batch is done

The batch record follows the master step by step and adds the facts: which lot of extract, the weight actually weighed, who checked, the capsule weights, the real yield. How the two relate, for food as well as supplements, is in master batch record vs batch record, and a supplement batch record filled in is in herbal products batch record. What a batch record is for is in what is a batch record.

Keeping it under control

Give each master a number and a revision. When anything changes (a supplier's ingredient, a blend time, a label), make a new revision, date it, have it approved by whoever is responsible for quality, and withdraw the old one from the floor. A batch record should say which revision it was made from.

I've put the rule into shorter words. Where it matters, read the section itself. Part 111 has many more requirements than this record (specifications, quality control, testing, the batch record itself). This is general information, not legal advice. For the label side, see dietary supplement labeling requirements.

Get the outline

Download the master manufacturing record outline. Twelve parts, each with what the rule asks for and the capsule maker's example, to replace with your own. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

The master is a document; the batches are paper copies of it, filled in by hand. Revision C is approved in March. In June a batch is made from a copy of revision B that was still in the drawer. The batch record looks complete. Nothing on it says the blend time changed, and nobody finds out until an auditor lines up the dates.

How TaroStack does it

TaroStack makes the batch from the current master, because there's only one.

The formula is a versioned recipe. Components and weights for the batch size, with scrap. A change makes a new version, and every batch shows which version it was made from.

Each batch is recorded against it. The components come off stock, and the batch record notes which lots were consumed, automatically.

Your checks are fields on the batch record: weights, "verified by", capsule weights, yield, initials, and a sign-off. The form prints for the floor.

Yield against the recipe. Recipe truth shows, from your own batch history, whether the formula yields what it claims.

Holds. A batch outside its yield limits can be held, out of what you can sell, until it's reviewed.

One report for a recall: which batches used a lot of extract, and who received them.

The job Paper master and copies In TaroStack
Which revision made this batch Whatever copy was used The recipe version on the batch
Which lot of each component Written by hand From stock, automatically
Yield against theoretical A sum on the batch record Recorded, and compared over time
Hold a batch for review A tag On hold: not for sale

TaroStack keeps records. It doesn't make a maker compliant with part 111 and doesn't replace your quality unit's review. Recipes, batches, lots and recalls are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

What is a master manufacturing record?

The written instructions and specifications for making one dietary supplement formulation at one batch size, required by 21 CFR 111.205. Each batch is then documented on its own batch production record.

What must a master manufacturing record include?

The product's name and strength, a complete list of components and their weights, what the label declares, any overage, theoretical yield with limits, the packaging and label, and written instructions with specifications, sampling, verification, precautions and corrective actions.

Is a master manufacturing record needed for each batch size?

Yes. The rule asks for one for each unique formulation and for each batch size.

Sources

  1. 21 CFR 111.205 (the requirement to establish a master manufacturing record for each unique formulation and each batch size) · read November 21, 2026
  2. 21 CFR 111.210 (what the master manufacturing record must include) · read November 21, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.