Skip to content

Jerky Cost Calculator: Raw Beef to the Cost of a Bag

A free jerky cost calculator: raw beef and marinade for a batch, the yield after drying, bags it fills, labor, kitchen and packaging, and what a price leaves.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 19, 2026 · 5 min read

Jerky is costed backwards from most food, because most of what you buy evaporates. Forty pounds of raw beef dries to about 16 pounds of jerky. So the cost of a bag isn't the price of 3 oz of beef. It's the price of the 7.4 oz of raw beef that 3 oz of jerky used to be, plus marinade, the bag, your time and the kitchen. For the batch below that comes to $5.23 for a 3 oz bag, of which $2.56 is beef. The calculator is free; put in your own beef price and yield.

The short version

  • Start from the raw weight and what you paid for it.
  • Weigh the finished jerky. Dried weight over raw weight is your yield.
  • Bags from a batch = dried ounces ÷ ounces a bag.
  • Add marinade, packaging, your hours and the kitchen.
  • TaroStack costs each batch from the beef lot it used and shows your real yield. More below.

An example: a 40 lb batch

Cedar Hollow Jerky is a made-up Montana jerky maker I use in these examples. One batch:

What goes in Amount You pay Cost in the batch
Beef, top round 40 lb $5.50 a pound $220.00
Soy sauce 0.5 gal $14.00 a gallon $7.00
Brown sugar 2 lb $2.10 for 2 lb $2.10
Spices and cure $6.90
Ingredients, the batch $236.00

Forty pounds went into the smokehouse and 16.2 lb came out: a yield of 40.5%. That's 259 ounces, which fills 86 bags of 3 oz.

A 3 oz bag
Ingredients ($236.00 ÷ 86) $2.74
Your time: 5 hours a batch at $20 $1.16
Kitchen and smokehouse, $69 a batch $0.80
Bag 30 cents, label 12 cents, oxygen absorber 10 cents $0.52
Full cost $5.23

The ingredients work out to 91 cents an ounce of finished jerky.

What the prices leave

Where it sells Price Fees Left a bag Margin
Direct, 3 oz bag $10.50 3% $4.96 47%
Wholesale $6.50 0% $1.27 20%

Two numbers run this business

The beef price. Every dollar a pound on raw beef adds $40 to the batch, which is 47 cents a bag. At $6.50 a pound, the bag costs $5.69 and wholesale leaves 81 cents. At $7.50 it leaves 34 cents. You can't hold a wholesale price through a beef market like that without knowing the number.

The yield. At 40.5% the batch fills 86 bags. Dry it a little further, to 38%, and it's 15.2 lb and 81 bags. The same $236 of ingredients is now $2.91 a bag, and the hours and kitchen are spread over five fewer bags too. Trim matters as much: fat and silverskin you cut off before marinating were paid for at $5.50 a pound. Weigh the trimmed meat and the finished jerky every batch and write both down.

Dryness isn't only a cost question. Jerky sold shelf-stable has safety rules for the heat step and the final dryness; those are in jerky HACCP plan.

Get the calculator

Download the jerky cost calculator. Two sheets and a read-me: the batch cost, with the number of bags as a number you type from your own yield, and the prices. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers. Setting the price itself is in how to price homemade jerky, and the margin by channel in jerky profit margin.

Where this stops working

The calculator assumes one beef price and one yield. In a real month you buy beef three times at three prices, and every batch dries a little differently. The sheet gives you the cost of the batch you typed in, which was probably a good one.

How TaroStack does it

TaroStack costs the batch you actually made, from the beef you actually bought.

Beef is received by lot, at its price. Three deliveries at $5.50, $5.85 and $6.10 are three lots. The batch that uses the $6.10 beef costs more, and you see it.

The recipe carries the yield. Jerky is a recipe: raw beef and marinade in, bags out. Record the batch with the bags it really made, and its cost a bag is real. From your batch history, TaroStack shows whether the recipe yields what it claims.

Actual against standard. Each batch shows what it used and cost beside what the recipe expected, so a low-yield batch stands out.

The lot goes on the bag. The batch record notes which beef lot it used, automatically. If the packer recalls a lot, one report shows which bags it's in and who got them.

The job Calculator In TaroStack
Beef at this week's price Retype it From the lot received
Yield of this batch Weigh and work out Recorded with the batch
Cost when yield slips Not seen Actual versus standard
Which beef is in which bags A notebook On the batch record

TaroStack costs the meat, marinade and packaging; your hours and the kitchen are yours to add. Recipes, batches and true cost are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

How much does it cost to make beef jerky?

In this example, $5.23 for a 3 oz bag with labor, kitchen and packaging, or 91 cents an ounce in ingredients. It moves with the price of beef and your yield.

How much jerky does a pound of beef make?

About 6 to 7 oz in this example (a 40.5% yield). Lean cuts and thin slices dry differently, so weigh your own.

What's the best cut for keeping jerky costs down?

A lean cut with little to trim, bought at a case price. Trim you throw away is beef you paid for.

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.