A jam log is one row for each kettle you cook, filled in as you go. It records what went in (fruit, sugar and pectin, each with its source or lot), how the cook ended (temperature, soluble solids, pH), how it was filled (temperature, jars, lid lot, seals checked) and who did it. Four of those numbers do the work. Soluble solids tell you the jam is jam: the federal standard is at least 65%. pH and fill temperature are what your process relies on to keep a sealed jar safe on a shelf. And the jar count, set against the fruit that went in, tells you whether the batch yielded what it should. When one kettle doesn't set, or a customer writes about a jar, the row is how you find out what was different. Below is a week of rows for a made-up maker, and the file.
The short version
- One row a kettle, written at the stove.
- Fruit and sugar by weight, with where the fruit came from.
- Soluble solids at the end of the cook: 65% or more.
- pH and fill temperature against the limits in your own process.
- Jars filled, lid lot, seals checked the next day.
- TaroStack keeps the same row as a batch record, with the lots filled in for you. More below.
What each column is for
| Column | Why |
|---|---|
| Date, batch code | The code goes on the jar. It's how a jar finds its row |
| Fruit, by weight, with source or lot | Fruit varies: this is the first place to look when a batch behaves differently |
| Sugar, by weight | With the fruit, it sets the recipe. The standard is by weight too |
| Pectin lot | Pectin strength varies from lot to lot |
| Cook end temperature | The usual sign the jam has reached its set |
| Soluble solids | The measure of the finished jam. Refractometer |
| pH | Acid for the set, and for safety |
| Fill temperature | A hot fill is what deals with molds and yeasts in the jar |
| Jars filled, size | The yield |
| Lids lot | A bad lot of lids shows up as failed seals across batches |
| Seals checked | Next day: button down, or it goes in the fridge |
| Initials, notes | Who, and anything unusual |
The numbers
Soluble solids: 65%. The federal standard of identity for jam and preserves says the finished product is not less than 65% soluble solids, measured with a refractometer. Below that it's a softer, wetter product that keeps less well, and it isn't jam by the standard. Read the refractometer on a cooled drop, not a boiling one.
Fruit to sugar. The standard also sets the least fruit: 47 parts by weight to 55 of sugar for one list of fruits (strawberry, raspberry, blueberry, blackberry, cherry, grape, orange and others), 45 to 55 for the rest (peach, apricot, plum, fig, pear, cranberry and others). The made-up maker here uses 20 lb of fruit to 22 lb of sugar, comfortably more fruit than either.
pH and fill temperature are your process's. Jams, jellies and preserves are outside the federal acidified foods rules, but a jar that sits on a shelf still depends on being acid enough and filled hot enough. The limits come from your own process: this maker's are pH 3.8 or lower and 185°F or hotter at the filler. Put yours on the Limits sheet. If you make low-sugar spreads, pepper jellies or anything with vegetables in it, ask a process authority which rules apply: they aren't standard jam.
A week of rows
| Date | Batch | Product | Cook end | Soluble solids | pH | Fill temp | Jars | Check |
|---|---|---|---|---|---|---|---|---|
| Nov 9 | SJ-1109 | Strawberry | 220°F | 66.0% | 3.3 | 192°F | 62 | OK |
| Nov 9 | PJ-1109 | Peach | 221°F | 66.5% | 3.5 | 190°F | 61 | OK |
| Nov 11 | RJ-1111 | Raspberry, first reading | 219°F | 63.5% | 3.2 | LOOK | ||
| Nov 11 | RJ-1111 | Raspberry, after 5 more minutes | 221°F | 65.5% | 3.2 | 191°F | 60 | OK |
| Nov 13 | BJ-1113 | Blueberry | 220°F | 66.0% | 3.4 | 189°F | 61 | OK |
| Nov 14 | SJ-1114 | Strawberry | 220°F | 65.5% | 3.3 | 186°F | 63 | OK |
The raspberry has two rows. The first reading was 63.5%, under the limit, at 219°F. It cooked five more minutes and read 65.5%. Both readings are on the log: the one that failed and the one after the fix. Rubbing out the first would hide the most useful thing on the page, which is that the frozen raspberries from that lot carried more water than usual.
Two blueberry jars didn't seal. Sixty-one filled, fifty-nine with the button down next morning. The two went into the fridge for the staff table, and the note says so.
The last strawberry is close. A fill temperature of 186°F against a limit of 185°F passes, and it's worth a look: the kettle was probably left standing while jars were fetched.
Reading it over time
After a month the log answers questions a single batch can't.
| Question | Where to look |
|---|---|
| Is my yield falling? | Jars filled for the same fruit and sugar |
| Did the new pectin change the set? | Cook end and soluble solids, by pectin lot |
| Are seal failures a lids problem? | Failures, by lids lot |
| Does one fruit supplier run wet? | Soluble solids at first reading, by fruit source |
A fuller safety plan for jam is in jam HACCP plan. The log for water-bath and acidified products is in canning log, what the batch cost in jam cost calculator, and how long it keeps in jam shelf life.
I read the jam standard on November 20, 2026. A rule published on October 13, 2026, and effective December 14, updates the reference to the test method and leaves the 65% as it is. This is general information, not legal advice. If you sell under a cottage food law, your state's rules decide what you may make.
Get the log
Download the jam making log sheet. The log with the week above and blank rows below, a Check column that compares soluble solids, pH and fill temperature with your limits, a Limits sheet, and a read-me. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers. Print it and keep it on a clipboard by the stove if that's where you'll actually fill it in.
Where this stops working
"Frozen, Hill Farm, lot HF-0718" was written by hand, at the stove, with sticky fingers, and on a busy day it's "raspb, freezer". Then the farm phones about lot HF-0718. The log should say which kettles it went into. What it says depends on how careful someone was on November 11, and there's no way to check.
How TaroStack does it
TaroStack fills in the lots, so the row doesn't depend on handwriting.
Each kettle is a batch. Recording it takes the fruit, sugar, pectin, jars and lids from stock, and notes which lots were consumed, automatically.
Your readings are fields on the batch record. Cook end, soluble solids, pH, fill temperature, seals checked, initials, and a sign-off. The form prints with your own checklist for the stove.
Recipe truth. From your own batch history, whether the recipe yields the jars it claims, and which ingredient's quantity is off.
The batch's cost is its own: the fruit at what that lot cost you, so a dear lot of raspberries shows in the margin.
One report for a recall. Which batches used lot HF-0718, which shops got them, and what's still on your shelf.
| The job | Clipboard | In TaroStack |
|---|---|---|
| Which fruit lot went in | Whatever was written | From stock, automatically |
| The batch's readings | A row | Fields on the batch record |
| Is the yield falling | Compare rows by eye | Recipe truth |
| Who got that batch | Invoices | One report |
TaroStack doesn't take a reading or set your limits. Recipes, batches, lots and recalls are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
