Laser engraving is profitable, and the laser has little to do with it. The machine's time costs a few cents a piece. What costs money is the blank, the design and setup before the first burn, and the minutes of loading and cleaning. A personalized cutting board sells for $36.75 and costs $20.12: it keeps 45.3%. A board in a run of ten with one logo sells for less, $27, and keeps 50.0%, because ten boards share one setup. That difference is the business. In a full-speed month the made-up shop below sells $10,815, keeps $5,206, and has $4,331 left after $875 of fixed costs, with every hands-on minute paid at $20 an hour. Below are a piece costed, what each kind of work earns an hour, the month, and a calculator.
The short version
- A personalized board keeps 45.3% of its price, a logo board in a run 50.0%.
- Laser time is 18 cents a board. Setup is $5 on a one-off and 50 cents in a run of ten.
- Runs earn more than twice as much an hour as one-offs.
- A full month leaves $4,331 with your hours paid at $20.
- Chase business orders. Keep personalized gifts for the price they'll bear.
- TaroStack counts blanks by kind and what each job leaves. More below.
A board, costed
A cutting board engraved with a family name, sold online.
| A personalized board | Cost |
|---|---|
| Blank | $9.00 |
| Design and setup, 15 minutes at $20 an hour | $5.00 |
| Laser time, 12 minutes | $0.18 |
| Loading, cleaning and packing | $2.00 |
| Packaging | $1.00 |
| Selling fees, 8% of $36.75 | $2.94 |
| Cost | $20.12 |
The laser itself, a $4,000 machine good for about 8,000 hours, costs about 88 cents an hour to run with lenses, repairs and power. A 12-minute engraving uses 18 cents of it. Everything else in the table is the blank and your minutes.
Margins by product
| Product | Sold | Price | Cost | Gross profit | Margin |
|---|---|---|---|---|---|
| Personalized cutting board | Online and markets | $36.75 | $20.12 | $16.63 | 45.3% |
| Cutting board, run of 10 with a logo | Business orders | $27.00 | $13.49 | $13.51 | 50.0% |
| Slate coasters, set of 4 | Online and markets | $24.25 | $13.26 | $10.99 | 45.3% |
| Logo keychain, orders of 100 | Business orders | $2.25 | $1.05 | $1.20 | 53.3% |
The margins look alike. The hours don't.
| Work | Left a piece | Left for an hour of hands-on time |
|---|---|---|
| Personalized board | $16.63 | about $48 |
| Logo boards, run of 10 | $13.51 | about $108 |
| Coaster sets, made in runs of 20 | $10.99 | about $139 |
| Logo keychains, orders of 100 | $1.20 | about $90 |
A personalized piece carries its whole fifteen minutes of setup. A run spreads it. That's why a laser shop that wants to grow chases business orders: logos, awards, gifts for a whole staff.
A month at full speed
| Product | Units | Sales | Gross profit |
|---|---|---|---|
| Personalized cutting board, online and markets | 120 | $4,410 | $1,996 |
| Cutting board, run of 10 with a logo, business orders | 100 | $2,700 | $1,351 |
| Slate coasters, set of 4, online and markets | 60 | $1,455 | $659 |
| Logo keychain, orders of 100, business orders | 1,000 | $2,250 | $1,200 |
| Month | $10,815 | $5,206 | |
| Fixed costs | −$875 | ||
| Left | $4,331 |
Fixed costs are $875 a month: studio rent ($500), insurance ($60), market fees ($120), marketing and samples ($100), and the website, design software and other software ($95). The month takes about 73 hands-on hours, 42 of them on personalized boards.
Break-even
| Fixed costs a month | $875 |
| Gross profit on each dollar of sales | 48 cents |
| Sales needed to cover fixed costs | $1,818 |
| As a share of a full-speed month | 17% |
The shop covers its fixed costs at about $1,818 of sales a month, 17% of a full month. In the plan this example comes from, the first year ends about $24,900 ahead on $73,500 of sales.
What moves it
| Change | Effect on a month |
|---|---|
| A misburn rate of 1 board in 20, blanks in the bin | −$172 |
| 30 personalized boards give way to 30 more boards in logo runs | −$94 and 7 hours freed |
| Blanks up $1 a board | −$220 |
| Personalized boards priced $3 higher, with no orders lost | +$331 |
Misburns. A crooked name on a $9 board is a blank and twenty minutes gone. Use a jig, burn a test on scrap for new materials, and count the ones that go wrong.
Blanks are the stock. Money sits in boards, slate and keychain blanks by the case. Buy for the orders you have.
The first year, month by month, is in laser engraving business plan, and pricing a piece in how to price laser engraved items. The general method is in how to price handmade items.
Get the calculator
Download the laser engraving profit margin calculator. One line for each product and where it sells: price, materials, packaging, labor and fees. It works out the cost, the gross profit, the margin and markup, and the price a target margin would need. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
An order comes in for forty maple boards with a logo, due Friday. There are boards on the shelf in three woods and two sizes, some set aside for personalized orders already paid for. Are there forty maple ones free, and if a case is ordered today, when does it land? The margin table says the job is worth taking. It doesn't say whether you can.
How TaroStack does it
TaroStack keeps the blanks counted and each job costed.
Blanks are stock by kind and size, with what each case cost you, freight included.
Each product is a recipe: a blank and a box. Record a run and the blanks come off stock.
"What could I make right now" says how many of a product the blanks on the shelf allow.
Every adjustment carries a reason, so misburns are a number at the end of the month.
A reorder list with supplier lead times, so a case is ordered before the order that needs it.
| The job | Calculator | In TaroStack |
|---|---|---|
| Maple boards free for an order | Count the shelf | Stock by item |
| Misburns this month | The bin | Adjustments by reason |
| What a board really cost | The last invoice | From what you paid |
| When to reorder blanks | When they run out | The reorder list |
TaroStack costs materials and packaging. Your minutes at the laser are yours to add. Stock, recipes and costing are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
