An ingredient statement is the list on a food label that begins "Ingredients:". The rule for writing one, 21 CFR 101.4, comes down to four things. Every ingredient is listed by its common or usual name. The order is heaviest first, by weight in the recipe. An ingredient that has ingredients of its own, such as dried cranberries made with sugar and oil, shows them in parentheses. And anything that makes up 2 percent or less may be moved to the end after the words "Contains 2% or less of". After the list comes the allergen statement. The work is turning a recipe into weights, and a spreadsheet does the sorting. Below is a granola recipe turned into a statement, step by step, and a builder file.
The short version
- Weigh every ingredient in one batch. Cups don't sort.
- List them heaviest first, by their ordinary names.
- An ingredient with its own ingredients gets them in parentheses.
- Ingredients at 2% or less can go last, after "Contains 2% or less of".
- Name each oil: "sunflower oil", not "vegetable oil".
- Then the allergen line: "Contains:" and the food source. For a nut, the nut.
- TaroStack keeps each recipe by weight, with its sub-recipes. More below.
The example
A made-up granola. One batch, weighed.
| Ingredient | Weight | Share of the batch | Order |
|---|---|---|---|
| Rolled oats | 130 lb | 53.8% | 1 |
| Honey | 34 lb | 14.1% | 2 |
| Pecans | 22 lb | 9.1% | 3 |
| Dried cranberries | 20 lb | 8.3% | 4 |
| Sunflower oil | 18 lb | 7.5% | 5 |
| Cane sugar | 16 lb | 6.6% | 6 |
| Salt | 1.2 lb | 0.5% | 7 |
| Cinnamon | 0.3 lb | 0.1% | 8 |
The statement that comes out of it:
Ingredients: Rolled oats, honey, pecans, dried cranberries (cranberries, sugar, sunflower oil), sunflower oil, cane sugar, contains 2% or less of: salt, cinnamon.
Contains: Pecans.
The four rules, on this recipe
Common or usual name. The name an ordinary shopper would know: "rolled oats", "honey", "salt". A brand name or a supplier's product code isn't an ingredient name.
Descending order by weight. 21 CFR 101.4 says ingredients "shall be listed by common or usual name in descending order of predominance by weight". The table above is that order. It has to be weight: a cup of oats and a cup of honey don't weigh the same, so a recipe in cups has to be weighed once before it can be labeled. When the recipe changes enough to change the order, the label changes.
Sub-ingredients. The dried cranberries arrive with their own ingredient list: cranberries, sugar, sunflower oil. The rule gives two ways to show that. Either name the ingredient and put its ingredients after it in parentheses, in their own order, as above. Or leave the name out and merge its components into the main list by weight. The first is simpler, and it's what the example does. Get each compound ingredient's list from its own label or from the supplier's specification, and check it again when you change supplier.
2 percent or less. Salt and cinnamon are under 2% of the batch. The rule lets ingredients at that level sit at the end, out of strict order, after a statement such as "Contains 2% or less of". You don't have to use it. With only two small ingredients it changes little. In a recipe with eight spices, it saves working out which weighs a gram more.
Oils. Each fat or oil is declared by its specific name. "Sunflower oil" is right. "Vegetable oil" alone isn't.
This example names each spice. Grouping spices, flavors or colors under one word has rules of its own: check them before you write "spices". More on ordering is in ingredient list order.
The allergen line
Federal law names the major food allergens and says how a label declares them. Under 21 U.S.C. 343(w) there are two ways: the word "Contains" followed by the food source, printed right after or beside the ingredient list, or the food source in parentheses after the ingredient within the list. For a tree nut, the source is the specific nut. So this label says "Contains: Pecans."
Check every sub-ingredient too. If the cranberries had been dusted with wheat flour to stop them sticking, wheat would be an allergen in this granola, found only on the cranberry supplier's label. The full list of allergens and the rules are in food allergen labeling requirements.
What an ingredient statement isn't
It isn't the nutrition facts panel, which is a separate box with its own rules: see how to make a nutrition label. It doesn't give amounts or percentages, so it doesn't give away the recipe: a competitor learns that there are more oats than honey, and no more. And it isn't optional for a packaged food with two or more ingredients. This is general information, not legal advice. Have a finished label checked before a large print run.
Get the builder
Download the ingredient statement builder. One sheet and a read-me: type each ingredient and its weight in a batch, in any order, and the sheet works out each one's share, its place in the list, and whether it's at 2% or less. Columns for its own ingredients and its allergen source sit beside it. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
The label is right on the day it's printed. Then the pecan price jumps and the recipe gets 18 pounds of pecans and 22 of cranberries, which swaps their order. Or the cranberry supplier changes, and the new ones are sweetened with apple juice. Nobody connects a change in the kitchen to 5,000 printed bags, and a label that's wrong about order is a nuisance. One that's wrong about an allergen is a recall.
How TaroStack does it
TaroStack keeps the recipe the label was written from.
Each product is a recipe by weight, with versions. A change makes a new version, and the old one is still there.
Sub-recipes hold a dough, a filling or a spice blend once, and every product that uses them follows a change.
Units convert, so a recipe written in pounds, an ingredient bought by the case and a pinch weighed in grams add up.
Allergens on Growth. With allergen tracking on, a batch can't start if its label leaves out an allergen its ingredients contain.
Each batch notes the lots it used, so a change of supplier shows in the batch it started with.
| The job | Index card and a spreadsheet | In TaroStack |
|---|---|---|
| The recipe by weight | Weighed once, then edited | The recipe, with versions |
| Did the order change | Nobody checks | The recipe's versions |
| An allergen the label misses | Found by a customer | The batch won't start |
| When the supplier changed | Unknown | The lots on the batch |
TaroStack doesn't write the ingredient statement, make nutrition labels or review a label for you. Recipes and batches are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes, with allergen tracking). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
