Skip to content

HACCP Plan for Gluten-Free: Under 20 ppm, and Proving It

A HACCP plan for gluten-free products: approved ingredients, changeover from wheat, testing under 20 ppm, the claim on the label, and a worksheet.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 21, 2026 · 6 min read

"Gluten-free" on a label is a claim with a number behind it. Under FDA's rule the food must contain less than 20 parts per million of gluten, whether the gluten came from an ingredient or from the flour dust in your bakery. Nobody asks you to make the claim. Once you do, you have to be able to back it. A gluten-free plan treats gluten as the hazard and follows it through four doors: ingredients that arrive carrying it, shared equipment and air that pass it on, the finished product, tested, and the label, which mustn't end up on the wrong loaf. A dedicated gluten-free kitchen closes the second door for good. A shared one has to manage it at every changeover. Below are the rule, the four control points for a made-up bakery that makes both, and a worksheet.

The short version

  • The claim means under 20 ppm gluten. That's a tested number, not an intention.
  • Wheat, rye and barley, and anything made from them, are out.
  • Oats are in only if they're sold as gluten-free.
  • Shared equipment: gluten-free first, after a full clean that's been tested.
  • Test finished product on a schedule, and whenever anything changes.
  • TaroStack keeps supplier lots, changeover checks and the batch order. More below.

What the rule says

Gluten-containing grains Wheat, rye, barley and their crossbreeds
A "gluten-free" food Has no ingredient that is one of those grains, or is made from one without the gluten removed; and any gluten present, for any reason, is below 20 ppm
"No gluten", "free of gluten", "without gluten" Held to the same standard
An ingredient made from wheat with the gluten removed (wheat starch) Allowed if the food is still under 20 ppm; "wheat" on the label then needs a set explanatory statement

Two things follow. Gluten from cross-contact counts: a loaf made from rice flour in a floury room can fail. And the rule covers the claim, not the food: a product with no gluten ingredients and no claim isn't promising anything. The labeling side is in gluten-free labeling requirements.

Wheat is also a major allergen and has to be declared. Rye and barley aren't on that list in US law, which is why a "contains" statement alone doesn't tell a person with celiac disease what they need to know.

The four points

A made-up bakery making wheat and gluten-free products in one room, on shared mixers.

CCP Limit Checked If it's missed
1 Ingredients Only items on the approved gluten-free list, with the supplier's document for the lot Each delivery Not used for gluten-free; held
2 Changeover Full clean, then a surface test for gluten that reads negative Each changeover from wheat Clean again, retest. No production until negative
3 Finished product Below 20 ppm by law. This bakery's limit: below 10 ppm at an outside lab Monthly, and for anything new Stop selling as gluten-free; hold and recall; find the source
4 Labeling The claim only on products made under the plan First and last pack of each run Hold and relabel

Ingredients. The obvious ones are easy. The ones that catch bakeries are oats (grown and milled alongside wheat unless sold as gluten-free), flours milled in a plant that also mills wheat, malt flavoring and malt vinegar (barley), soy sauce, and "natural flavors". Ask every supplier two questions: is it gluten-free to the 20 ppm standard, and what else runs on that line? The form is in supplier questionnaire template.

Changeover. Wheat flour hangs in the air for hours and settles on everything. So: gluten-free production first thing, before any wheat flour is opened, after the previous night's full clean. Dedicated, color-coded tools, pans and proofing baskets. Rice flour for dusting. And a swab test on the mixer and a second surface before starting, because looking clean and being under 20 ppm aren't the same.

On the worksheet's log, a swab found gluten on the mixer's bowl guard seam. Production waited thirty-five minutes while the guard came off, was washed and retested. How to prove a cleaning method works in the first place is in allergen cleaning validation.

Testing. A lab test of finished product is the proof behind the claim. Monthly is this bakery's schedule, with an extra test for every new product, ingredient or supplier. It set its own limit at 10 ppm so a result near the edge is caught before it's a violation.

Labels. Two ranges in similar packaging is how a wheat loaf ends up in a gluten-free bag. One product on the packing bench at a time.

Shared or dedicated

Shared room Dedicated room
Ingredient control Needed Needed
Changeover and swabs Every time None
Airborne flour The hard problem None, if nothing with gluten comes in
Testing Monthly at least Still needed: ingredients can fail
What you can honestly say "Made in a bakery that also uses wheat" plus a tested claim A simpler story

Some bakeries decide the shared-room burden isn't worth it and either build a separate room or drop the claim and say "made without gluten ingredients" (which makes no promise about 20 ppm, and customers with celiac disease will ask).

This is general information, not legal advice. A written program for all allergens is in allergen control plan template, and the business in gluten-free bakery business plan.

Get the worksheet

Download the gluten-free HACCP plan worksheet. Three sheets and a read-me: the hazard analysis from approving ingredients to labeling, the plan with its four control points, and a monitoring log for swabs and lab results. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

A lab result comes back at 26 ppm on a loaf from lot GF-1104. Now the questions: which bag of rice flour, which oats, which day, what was made on that mixer before it, and which shops have that lot. The swab log says a clean passed that morning. It doesn't say what was baked before the clean or which supplier lots went into the loaf.

How TaroStack does it

TaroStack records what went into each batch and what was made around it.

Receiving records the supplier's lot for every bag, with its documents' details.

Each bake is a batch, in the order it was made, and it notes which lots it consumed, automatically. GF-1104 shows its rice flour, its oats and its starch.

Your changeover check is a field on the batch record: "swab negative", initials, a sign-off.

Allergens on Growth. With allergen tracking on, a batch can't start if its label leaves out an allergen its ingredients contain.

One report for a recall: which shops got a lot, and what's still on the rack. Starting a recall holds the rest.

The question after a bad result Paper logs In TaroStack
Which flour and oats went in Unknown On the batch record
What was made before it Memory The day's batches, in order
Other batches from the same bag Unknown Every batch that used the lot
Who has the loaf Delivery sheets One report

TaroStack doesn't test for gluten or make a product gluten-free. Recipes, batches, lots and recalls are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes, with allergen tracking). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

What does gluten-free mean on a label?

Under FDA's rule, that the food has no gluten-containing grain as an ingredient and that any gluten present, from any source, is below 20 parts per million.

Do I need a plan to make gluten-free food?

If you make the claim, you need to be able to show it's true: controlled ingredients, protection from cross-contact, and testing. A written plan is how a maker does that.

Are oats gluten-free?

Oats aren't one of the gluten-containing grains, but they're often contaminated with wheat or barley. Use oats sold as gluten-free, and keep the supplier's documents.

Sources

  1. 21 CFR 101.91 (gluten-free labeling: the gluten-containing grains; below 20 ppm; the wheat statement) · read November 21, 2026
  2. 21 CFR 117.135 (preventive controls, including food allergen controls) and 117.80 (allergen ingredients identified and held to prevent cross-contact) · read November 20, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.