Garlic in oil is one of the few foods the FDA Food Code names outright as needing temperature control, and the reason is botulism. Garlic is a low-acid vegetable that grows in soil, where Clostridium botulinum spores live. Oil shuts out the air. At room temperature the spores can grow and make toxin, and the oil looks and smells the same. Cooking the garlic doesn't fix it: the spores survive. So a plan has three honest options. Keep it cold and short-dated: 41°F or below, a discard date on every container. Acidify the garlic to a pH of 4.6 or below before it meets the oil, which in a restaurant needs a variance. Or don't make it: buy garlic that was acidified by its manufacturer. Below are the three, the control points, a week's log, and a worksheet.
The short version
- Garlic in oil at room temperature is a botulism risk. No smell or look gives it away.
- Cooking, roasting and confit don't make it safe to keep warm: spores survive heat.
- Cold and dated: 41°F or below, used within days.
- Acidified: equilibrium pH 4.6 or below, measured with a meter, under a variance or a filed process.
- Never on the line in a squeeze bottle all week.
- TaroStack dates every batch and flags it before its day. More below.
Why this food
| The organism | Clostridium botulinum, a spore-former found in soil |
| What it needs | Low acid, no air, moisture, warmth |
| What garlic in oil gives it | Garlic above pH 4.6, sealed under oil, at room temperature |
| What heat does | Kills growing cells. Doesn't reliably kill spores at kitchen temperatures |
| What the Food Code says | Garlic-in-oil mixtures need time and temperature control unless they're modified so that growth and toxin can't happen |
The same reasoning covers garlic confit, roasted garlic stored in its oil, and oil infused with fresh herbs, peppers or other low-acid vegetables.
Three ways to do it
1. Cold and short. Make small batches, cool them fast, keep them at 41°F or below, and put a discard date on every container. The Food Code's date marking rule allows ready-to-eat food made in the kitchen up to 7 days at 41°F. The kitchen in the example below uses 4. What's on the line sits in an ice bath or a refrigerated well, in a container small enough to be used in a shift, and goes back to the cooler or in the bin. This needs no variance: the oil is treated as what it is, a food that needs temperature control.
2. Acidified. Soak the chopped garlic in an acid solution (citric acid or vinegar) until the garlic itself, all the way through, is at pH 4.6 or below, and prove it with a pH meter on every batch. At that point botulinum can't grow. This is a change to the food to make it safe without refrigeration, and in a food establishment that needs a variance from the health department, with a HACCP plan, before you start: see HACCP variance form. A packaged, shelf-stable garlic oil sold to stores is an acidified food under FDA's rules, with a process worked out by a process authority. The difference is set out in acid food vs acidified food.
3. Bought acidified. Jarred chopped garlic usually lists an acid among its ingredients, because the manufacturer has done step 2. Ask the supplier for the product's pH specification, keep it on file, and make your oil from that. Many kitchens stop here.
The control points
A made-up restaurant using method 1, with method 2 for one sauce under a variance. Its limits are its own where they're tighter than the code.
| CCP | Limit | Checked | If it's missed |
|---|---|---|---|
| 1 Cooling a cooked batch (confit) | 135°F to 70°F within 2 hours, to 41°F within 6 hours in all | Each batch | Thrown away |
| 2 Cold holding | 41°F or below, in the cooler and on the line | Twice a day, and at each line set-up | Thrown away if the time warm isn't known |
| 3 Discard date | A date on every container: 4 days from making | When made; checked each morning | Past its date: thrown away |
| 4 Acidification, for the one sauce | Equilibrium pH 4.6 or below; this kitchen's target is 4.2 | pH meter, each batch, after the soak | Not used: soaked longer and retested, or thrown away |
Equilibrium is the word that matters in point 4. Acid on the outside of a piece of garlic reads low straight away. The reading that counts is taken after the acid has reached the middle: blend a sample and measure the blend. How to use and calibrate a meter is in pH testing for acidified foods.
A week's log
| Day | Batch | Check | Reading | Limit | OK? |
|---|---|---|---|---|---|
| Mon | Garlic confit GC-1116 | Cooling, at 2 hours | 66°F | 70°F or below | Yes |
| Mon | Garlic oil, line bottle | Cold holding | 39°F | 41°F or below | Yes |
| Tue | Chili garlic sauce CG-1117 | pH after soak | 4.9 | 4.6 or below | NO: act |
| Wed | Chili garlic sauce CG-1117 | pH, retest | 4.1 | 4.6 or below | Yes |
| Fri | Garlic confit GC-1116 | Discard date | Day 5 | 4 days | NO: act |
On Tuesday the sauce's garlic read 4.9 after its soak: the pieces had been cut larger than the recipe says, and the acid hadn't reached the middle. It soaked overnight in the cooler and read 4.1 on Wednesday. On Friday a container of Monday's confit was found behind the butter, a day past its date. It went in the bin.
This is general information, not legal advice. Your health department decides what needs a variance. Dating is in date marking under the food code, and holding temperatures in hot and cold holding temperatures.
Get the worksheet
Download the garlic in oil HACCP worksheet. Three sheets and a read-me: the hazard analysis from receiving garlic to the line, the plan with its control points, and a monitoring log. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
Picture a squeeze bottle of house garlic oil that has been on the line since Monday. Nobody decided to leave it there. It was filled from Monday's batch, it never had a date on it, and the log for the walk-in looked perfect all week. A paper plan depends on someone noticing the one container that isn't where the plan says it is.
How TaroStack does it
TaroStack gives every batch a date and tells you before it arrives.
Each batch of garlic oil is a batch with a lot code and a use-by. Lot labels print with both, for every container it fills.
An alert comes before the date, in the app and by email, with what's about to go out of date.
Oldest first. Stock goes out first-expired-first-out by default.
Your checks are fields on the batch record: cooling time, pH after the soak, initials.
The garlic's own lot is noted on the batch, automatically, so a supplier's recall finds the batches it went into.
| The job | Paper | In TaroStack |
|---|---|---|
| A date on every container | Tape and a marker | A printed lot label |
| What goes out of date tomorrow | Look at every shelf | The expiry alert |
| The pH reading for this batch | A clipboard | On the batch record |
| Which batches used that garlic | Unknown | The lots on the batch |
TaroStack doesn't measure pH or temperature, and it doesn't write your variance. Recipes, batches, lots and expiry dates are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
