Skip to content

HACCP Plan for Fried Chicken: Fry, Hold, Cool, Reheat

A HACCP plan for fried chicken: 165°F in the thickest piece, hot holding, breading and egg wash, cooling leftovers, shared fryer oil, and a worksheet.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 21, 2026 · 6 min read

A HACCP plan for fried chicken has five control points, and the one people get wrong is the fryer. Chicken has to reach 165°F in the thickest piece, and a bone-in breast in hot oil turns the right color minutes before it gets there. So the limit is a temperature, measured with a probe in every batch, never a color or a timer. The other four are the usual ones: raw chicken kept at 41°F or below, fried chicken held at 135°F or above or sold within a written time limit, leftovers cooled on the clock, and anything brought back reheated to 165°F. Around them sit two procedures a chicken shop needs: what happens to the breading and egg wash during a shift, and what else goes in the oil. Below are the control points for a made-up chicken counter, a day's log, and a worksheet.

The short version

  • 165°F in the thickest piece of every batch. Probe it.
  • Raw chicken at 41°F or below, on the lowest shelf.
  • Hold at 135°F or above, or mark the pan and throw it away at 4 hours.
  • Cool from 135°F to 70°F in 2 hours, and to 41°F in 6 in all.
  • Reheat to 165°F for 15 seconds.
  • Replace breading and egg wash on a schedule. Say on the menu what shares the oil.
  • TaroStack records which case of chicken went into which day's batches. More below.

The control points

The limits are the FDA Food Code's. Your state's or county's code is what binds you.

CCP Limit Checked If it's missed
1 Cold holding 41°F or below Twice a day Thrown away if the time warm isn't known
2 Frying 165°F in the thickest piece Every batch Fried on
3 Hot holding 135°F or above; or 4 hours, marked Every hour Thrown away
4 Cooling 135°F to 70°F in 2 hours; to 41°F in 6 in all At 2 hours and at 6 Thrown away
5 Reheating 165°F for 15 seconds Each batch Reheated on, or thrown away

Frying. Oil that's too hot is the usual cause of undercooked chicken. The crust browns fast, the cook pulls the basket, and the meat by the bone is still pink. Set the oil to the recipe's temperature, fry pieces of one size together, and probe the largest piece in each basket, away from the bone. Thighs and wings forgive more than breasts do.

Hot holding. A holding cabinet has to keep the chicken at 135°F or above, and the only way to know is a probe in the chicken, not the dial on the door. The other way is time: the Food Code lets food stay out of temperature control for up to 4 hours if you have a written procedure and each pan is marked with the time it must be gone by. For a counter that fries all day, a marked pan and a short hold also sells better chicken.

Cooling and reheating. Leftover chicken for tomorrow's salad or sandwiches goes into shallow pans in the cooler, uncovered at first, and gets a reading at two hours. Chicken brought back to the hot line is reheated to 165°F, not just warmed. How to cool fast is in critical limits for cooling.

Two procedures that aren't control points

Breading and egg wash. Raw chicken goes through them all shift, so they're as raw as the chicken. Keep the wash cold, sift the flour, and replace both on a schedule you write down: this counter's own rule is every four hours and at every change of shift. Used breading is never topped up into a fresh bin, and never used for anything that won't be fried.

The oil. If fish or shrimp go into the same fryer, their proteins end up on the chicken, and a customer with a shellfish allergy needs to know. Use a fryer for chicken only, or say on the menu what shares the oil. The breading itself carries wheat, and often milk and egg. A sheet for writing this down is in allergen matrix template.

A day's log

Time What Reading Limit OK?
10:40 AM Thighs, bone-in, batch 1 171°F 165°F or above Yes
11:55 AM Breasts, bone-in, batch 4 158°F 165°F or above NO: act
1:00 PM Holding cabinet, wings 142°F 135°F or above Yes
3:00 PM Walk-in, raw chicken shelf 38°F 41°F or below Yes
9:30 PM Leftover tenders, cooling, at 2 hours 62°F 70°F or below Yes

At 11:55 the breasts were browned and read 158°F. Someone had turned the oil up for the lunch rush. They went back in for three minutes and read 167°F, and the oil was set back to the recipe's temperature. The probe caught what the color would have passed.

This is general information, not legal advice. Roasting a bird whole is in critical limits for roasting a chicken, and a full restaurant plan in HACCP plan template for a restaurant.

Get the worksheet

Download the fried chicken HACCP worksheet. Three sheets and a read-me: the hazard analysis from receiving to the fryer oil, the plan for five control points, and a monitoring log that marks a reading outside its limit. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

The supplier calls: a lot of chicken thighs is being recalled. The shop takes ten cases twice a week. Was that lot delivered, was it fried on Tuesday or is it still in the walk-in, and which case is it? The fry log has temperatures. It doesn't have lot numbers, and the receiving slip says "thighs, 10 cs".

How TaroStack does it

TaroStack records which case went into which day's chicken.

Receiving records each case's lot and use-by date, by scanning the case label where it has one.

Oldest first. Stock goes out first-expired-first-out by default, with an alert before a date arrives.

Each day's frying is a batch. It notes the lots it used, automatically, and your checks are fields on its record: internal temperature, time, initials.

If a lot is recalled, one report shows which batches used it, and what's left goes on hold.

A reorder list in days of cover for chicken, flour and oil.

The recall Fry log and slips In TaroStack
Was that lot delivered "Thighs, 10 cs" The lot on the receipt
Fried already, or in the walk-in Unknown The batches that used it; stock by lot
Keeping it out of the fryer A note on the door On hold
The batch's temperature A clipboard A field on the batch record

TaroStack doesn't take temperatures or write your HACCP plan. Recipes, batches, lots and recalls are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes, with allergen tracking). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

What temperature does fried chicken have to reach?

165°F in the thickest piece, under the FDA Food Code's rule for poultry. Measure it with a probe away from the bone, in every batch.

What are the critical control points for fried chicken?

Cold holding of raw chicken, frying, hot holding, cooling leftovers and reheating. Breading, egg wash and shared fryer oil are handled by written procedures.

How long can fried chicken sit in a warmer?

At 135°F or above, it isn't on a clock for safety. Without temperature control, the Food Code allows up to 4 hours under a written procedure, with the pan marked and the chicken then thrown away.

Sources

  1. FDA Food Code 2026: 3-401.11 (cooking: poultry 165°F), 3-403.11 (reheating for hot holding), 3-501.14 (cooling), 3-501.16 (hot and cold holding) · read November 21, 2026
  2. FDA Food Code 2026, 3-501.19: time as a public health control (written procedures; 4 hours, marked, then discarded) · read November 21, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.