A freeze drying batch log has a row for every load that goes through the machine: the date, a batch number, what was on the trays, the weight going in, the weight coming out, how many hours the cycle ran, and the result of a dryness check. The sheet works out the share of water removed. The dryness check is the column that protects you: weigh the load, run it two more hours, weigh it again. If it lost more than a gram or two, it wasn't done. Food that goes into a bag with water still in it softens, clumps or molds weeks later, on someone else's shelf. Here's the log, with four loads in it.
The short version
- Weigh every load before and after. A kitchen scale that reads grams is enough.
- Write the cycle hours for each product; they become your starting point next time.
- Do the two-hour recheck on every load until you know a product well, and on fruit always.
- Give each load a lot, and put it on every bag.
- TaroStack records each load as a batch with its lot, and takes bags and oxygen absorbers off stock. More below.
An example: four rows, three products
Frost Moon Treats is a made-up Utah maker of freeze-dried candy and fruit that I use in these examples. Four trays a load:
| Batch | Product | In | Out | Water removed | Hours | Recheck lost | Dry? | Bags |
|---|---|---|---|---|---|---|---|---|
| FD-1110-A | Strawberries, sliced | 3,600 g | 396 g | 89% | 28 | 1 g | Dry | 22 |
| FD-1111-A | Fruit chews | 1,800 g | 1,620 g | 10% | 6 | 0 g | Dry | 16 |
| FD-1112-A | Apple slices | 3,200 g | 512 g | 84% | 24 | 9 g | MORE TIME | |
| FD-1112-A | Apple slices, second recheck | 3,200 g | 498 g | 84% | 28 | 1 g | Dry | 20 |
Reading it
Fruit is mostly water. Candy isn't. The strawberries lost 89% of their weight over 28 hours. The fruit chews lost 10% in six. They puff up and turn crunchy, but there was never much water in them. If you sell by weight, this column is your yield: 3,600 grams of berries became 396 grams of product, 18 grams a bag across 22 bags.
The apple load wasn't done at 24 hours. It came out at 512 grams and looked dry. Two more hours took off another 9 grams, well over this maker's limit of 2. Back in for four hours, then another recheck: 498 grams, 1 gram lost. Dry. Both rows are on the sheet under the same batch number. Had it been bagged at 512, those 14 grams of water would have been sealed in with it.
Hours become your recipe. Next time apples go in, start at 28 hours, not 24. Thicker slices, a fuller tray or a humid day will change it, which is why the weights matter more than the clock.
The limit of 2 grams sits on a second sheet. It's this maker's own number for a four-tray load. Set yours, and be stricter with anything dense or sugary.
What else to write
The lot. FS-1110 is on every bag from that strawberry load. If a shop reports a soft bag, you know which load, which day, and what the recheck said.
Where the fruit came from, in the notes or on your receiving sheet. Freeze-drying doesn't kill everything that might be on raw fruit, so the supplier and their lot belong in your records.
Whether freeze-dried food you sell needs a licence, and which kind, depends on your state. Utah's rules for this example are in license to sell candy, and the idea behind dryness limits in water activity for food makers.
Get the log
Download the freeze drying batch log. The log, with water removed and the dry check worked out, your limit on its own sheet, and a read-me. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
The machine runs day and night, and loads overlap with packing. The log gets filled in from memory, the recheck gets skipped when there's an order due, and bags from two loads end up in one bin with one lot written on it.
How TaroStack does it
TaroStack makes each load a batch you can't lose track of.
A load is a batch with its own lot. Freeze-dried strawberries are a recipe: fresh berries in, bags out, with a bag, a label and an oxygen absorber each. Record the batch and the berries and packaging come off stock, and the bags go in under their lot with a best-by date.
The weights and the recheck are fields on the batch. Weight in, weight out, hours and the recheck go in fields of your own on the batch record, with initials.
Not dry, not for sale. Put the batch on hold until the recheck passes. Held stock stays out of what can be sold.
Yield shows up. From your own batch history, TaroStack shows whether a recipe yields what it claims, so you know what a pound of fresh fruit really becomes.
| The job | Log sheet | In TaroStack |
|---|---|---|
| Which load is in this bag | A lot, if written | The batch's lot, on the label |
| A load waiting on its recheck | A sticky note | On hold |
| Bags and absorbers left | Count them | Come off with the batch |
| Fresh fruit to finished weight | Work it out | Yield against the recipe |
Recipes, batches, lots and holds are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
