A candle burn test sheet has one row for every burn of every test candle. Each row records which candle it was (jar, wax, fragrance and how much), which wick, how long it burned, whether the melt pool reached the edge, how deep the pool got, how tall the flame stood, how hot the side of the jar ran, and whether there was soot or a mushroomed wick. Test three wick sizes side by side, burn each for four hours at a time all the way down, and the sheet tells you which wick the candle gets. Below is a filled-in example and the file.
The short version
- Pour three or more test candles that differ only in the wick.
- Let them cure, then burn in four-hour sessions, and write a row for each session.
- Measure the same six things every time.
- Burn all the way to the bottom: a wick that's right at the top can run hot at the end.
- TaroStack keeps the winning recipe and records which lots of wax, fragrance and wick went into every pour. More below.
What to measure
| Column | How | What you're looking for |
|---|---|---|
| Pool to the edge? | Look at the end of the burn | Yes by the end of a four-hour burn. No means tunneling |
| Pool depth | A toothpick, or a ruler against the glass | About a quarter to half an inch |
| Flame height | Ruler held beside the jar | Steady, not flickering or smoking |
| Jar side temperature | An infrared or stick-on thermometer | Under your own limit |
| Soot or mushroom | Look at the wick and the rim | Neither |
| Hours | A timer | The same every session, so rows compare |
The numbers in the right-hand column are rules of thumb that makers work to. They aren't a standard. The industry's fire-safety standard for candles has its own tests, and this sheet is your development log, not that test.
An example: three wicks, one jar
Lehua Glow is a made-up candle maker on Oʻahu that I use in these examples. It's choosing a wick for a new plumeria scent in its 9 oz jar, soy wax, fragrance at 8%. Three candles from pour batch P-1026, wicked in sizes 8, 10 and 12:
| Test | Wick | Burn | Hours | Pool to edge | Depth | Flame | Jar side | Soot | Result |
|---|---|---|---|---|---|---|---|---|---|
| T-041 | Size 8 | 1 | 4 | No | 0.2 in | 0.6 in | 118°F | No | LOOK |
| T-041 | Size 8 | 2 | 4 | No | 0.25 in | 0.6 in | 121°F | No | LOOK |
| T-042 | Size 10 | 1 | 4 | Yes | 0.3 in | 0.9 in | 131°F | No | Pass |
| T-042 | Size 10 | 2 | 4 | Yes | 0.35 in | 1.0 in | 134°F | No | Pass |
| T-042 | Size 10 | 3 | 4 | Yes | 0.4 in | 1.0 in | 138°F | No | Pass |
| T-043 | Size 12 | 1 | 4 | Yes | 0.6 in | 1.6 in | 152°F | Yes | LOOK |
The size 8 tunnels. After two burns there's still half an inch of wax on the wall. The size 12 does the opposite: a 0.6 inch pool, a 1.6 inch flame, a jar at 152°F and soot on the rim after a single burn. The size 10 passes three times, and its jar temperature is creeping up as the flame gets lower in the glass (131, 134, 138), which is why you keep going to the bottom before calling it.
The Result column works itself out. It says Pass when the pool reached the edge, the depth, flame and temperature are inside three limits on a second sheet, and there's no soot. This maker's limits are 0.5 inch, 1.5 inches and 150°F. Type your own.
Rules that keep the test honest
Change one thing at a time. If T-042 and T-043 differ in wick and in fragrance load, you've learned nothing about either.
Write the pour batch. A test only tells you about the wax and fragrance lots you poured. When the fragrance supplier reformulates, or you switch wax, the old result is history and the candle gets tested again.
Test every scent. Fragrance oils burn differently, and a wick that suits plumeria may drown in vanilla.
Keep the sheets. A dated burn test for each candle you sell is the first thing an insurer or a wholesale buyer will want to see if a jar ever cracks. Label and safety rules are in candle regulations in the U.S.
Get the sheet
Download the candle burn test sheet. Three sheets: the burn tests with a Result that works itself out, your limits, and a read-me. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
The test sheet says size 10. Six months later a pourer grabs size 12s because the 10s ran out, or the new drum of wax is a different blend, and nothing connects the candle on the shelf to the test it was supposed to match.
How TaroStack does it
TaroStack makes the tested candle the recipe, and every pour a record of what went in.
The recipe is the result of the test. The 9 oz plumeria is a recipe: so much wax, fragrance at 8%, one size 10 wick, a jar, a lid, a label. Recipes have versions, so when you retest and change the wick, batches made after that carry the new version.
Every pour notes its lots. Record a batch of 24 and the wax, fragrance, wicks and jars come off stock. The batch record notes which lot of each was used, automatically. If a drum of wax turns out to be off, one report shows which candles it's in and who bought them.
Your own checks on the batch. Add fields of your own to the batch record (pour temperature, room temperature, a cure-until date, initials), and print the form to fill in at the bench.
Out of size 10s? The reorder list flags wicks before they run out, so nobody substitutes.
| The job | Paper and memory | In TaroStack |
|---|---|---|
| Which wick this candle takes | The test binder | The recipe |
| Which wax lot is in these jars | Not recorded | On the batch record |
| A change after a retest | Tell everyone | A new recipe version |
| Running out of the right wick | Found on pour day | A reorder list |
Recipes, batches and lots are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
