Skip to content

Brewery HACCP Plan: Is One Required, and an Example

A brewery HACCP plan example: what 21 CFR 117.5 exempts alcoholic beverages from, the hazards a small brewery really has, two control points, and a worksheet.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 19, 2026 · 6 min read

A licensed brewery in the United States isn't required by FDA to have a HACCP plan or a food safety plan for its beer. The rule that asks food makers for one, subpart C of 21 CFR part 117, has an exemption at 117.5(i) for alcoholic beverages made at a facility that needs a federal alcohol permit and is registered with FDA. The rest of part 117, including good manufacturing practices, still applies. So a brewery writes a HACCP plan because a buyer, a distributor or a certification asks for it, or because it wants one. The real hazards in a brewery are few: cleaning chemicals, glass, and allergens in some beers. Below is the exemption, an example plan with two control points, and a worksheet.

The short version

  • FDA's preventive controls rule doesn't apply to beer at a permitted, registered brewery.
  • Good manufacturing practices still do.
  • Buyers and auditors may ask for a plan anyway.
  • The hazards worth a control point: caustic or acid left behind, and glass at the bottle filler.
  • Lactose, nuts, wheat and some finings are allergens: label them.
  • Low- and no-alcohol beers lose beer's built-in protections and need their own analysis.
  • TaroStack records every brew with its lots and tells you which accounts got it. More below.

What the exemption covers

Under 21 CFR 117.5(i)
Beer, at a brewery that needs a Treasury permit and registers with FDA Subparts C (hazard analysis and preventive controls) and G (supply-chain program) don't apply
Food that isn't alcoholic, at the same brewery Also exempt if it's prepackaged so nobody touches it and is 5% of sales or less
Everything else in part 117 Not lifted by this paragraph

A taproom kitchen is a different matter, and it comes under the health department like any restaurant. And if you make a non-alcoholic product in volume, read the second row carefully: it may not be covered.

The hazards a brewery has

Step Hazard Likely? Control
Grain receiving and milling Mycotoxins; stones and metal Yes Supplier's certificate; magnet and screen
Mash and boil Pathogens No The boil
Fermentation Pathogens growing No, in a beer of ordinary strength Alcohol, low pH, hops
Additions Allergens: lactose, nuts, wheat Yes, in those beers Allergen list; labels and menu boards
Cleaning in place Caustic or acid left in a tank, line or keg Yes Final rinse checked
Bottling Glass fragments Yes Breakage procedure
Kegging and canning Cleaner left in a keg Yes Rinse checked

The fermentation row carries a condition. Beer's safety rests on alcohol, acidity, hops and the boil together. Take one away, as in a low-alcohol or alcohol-free beer, and the analysis has to be done again from the start.

An example plan

A made-up small brewery that kegs and bottles. The limits are its own.

CCP Limit Checked If it's missed
1 Final rinse after cleaning Rinse water at pH 6.5 to 8.5, matching the supply water Strip or meter on the last rinse, every tank, line and keg run Rinse again and retest; hold and test anything already filled
2 Glass at the filler No bottle from around a break is released: three positions each side, heads rinsed Operator watches; each break is counted and recorded Stop, remove, rinse, record

Which steps are control points is a judgment. Another brewery might handle both under its cleaning and glass procedures and have no CCPs at all. An auditor will want to see the reasoning either way.

Two days of rinse checks

When What pH Limits OK?
Nov 10, 2:20 PM Fermenter 2 after cleaning 7.4 6.5 to 8.5 Yes
Nov 10, 3:05 PM Keg run 31 7.6 6.5 to 8.5 Yes
Nov 11, 9:10 AM Bright tank 1 after cleaning 10.8 6.5 to 8.5 NO: act
Nov 11, 9:25 AM Bright tank 1, second rinse 7.5 6.5 to 8.5 Yes

A rinse at 10.8 is caustic still in the tank. It was caught by a ten-second test before 15 barrels of beer went in on top of it.

This is general information, not legal advice. State alcohol and health agencies have their own rules. The difference between FDA's plan and a HACCP plan is in preventive control plan vs HACCP, and the programs that sit under either one in prerequisite programs for HACCP.

Get the worksheet

Download the brewery HACCP plan worksheet. Three sheets and a read-me: a hazard analysis for each step from grain to package, the plan with its two control points, and a monitoring log that checks each reading against a lower and an upper limit. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers. For gravity and yeast by batch, see the brew log sheet.

Where this stops working

The buyer's form has a second question under "HACCP plan": can you trace a lot within four hours? The plan doesn't answer that. The answer is in which malt and hop lots went into each brew, which kegs and cases came out of it, and which accounts they went to, and those live in the brew log, the packaging sheet and the delivery book.

How TaroStack does it

TaroStack keeps the brew, the package and the account on one trail.

Each brew is a batch. Record it and the malt, hops and yeast come off the lots you used, noted on the batch record automatically.

Packaging is a batch too. Kegs and cases get their own lot code and date, tied to the brew they came from.

Your checks are fields. Rinse pH, glass breaks and initials go on the batch-record form, with sign-off.

Allergens on Growth. With allergen tracking on, a batch can't start if its label leaves out an allergen its ingredients contain, such as the lactose in a milk stout.

The recall report, and a timed drill. From a hop lot to every brew, every keg and every account, in one report. A traceability drill is timed and saved, so the buyer's four-hour question has a dated answer.

The job Three logs In TaroStack
Malt and hop lots in a brew The brew log Noted on the batch automatically
Kegs from that brew The packaging sheet Lots tied to the brew
Accounts that got them The delivery book The recall report
Proof you can trace A promise A timed, saved drill

TaroStack doesn't write your HACCP plan or your TTB reports. Recipes, batches, lots and recalls are on every plan, from $9.99 a month (5 recipes); allergen tracking is on Growth at $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

Do breweries need a HACCP plan?

Not under FDA's preventive controls rule: 21 CFR 117.5(i) exempts alcoholic beverages at a permitted, registered facility from that part. Customers and certifications may still ask for one.

What are the critical control points in a brewery?

It varies. Many plans have the final rinse after chemical cleaning and glass control at the bottle filler. Some breweries control both through procedures and have no CCPs.

Is beer a food safety risk?

Ordinary beer is low risk because of the boil, alcohol, acidity and hops. The risks that remain are chemical, physical and allergen. Low- and no-alcohol beers need their own analysis.

Sources

  1. 21 CFR 117.5(i): subparts C and G do not apply to alcoholic beverages at a facility that needs a Treasury permit, registration or approval and registers with FDA · read November 19, 2026
  2. 21 CFR 117.126: what a food safety plan contains (hazard analysis, preventive controls, supply-chain program, recall plan, monitoring, corrective actions, verification) · read November 19, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.