Skip to content

SFCR Ingredient Traceability: From Supplier Lot to Your Lot

What section 90(1)(d) of the SFCR asks you to record about ingredients, what it leaves out, and how to link each supplier lot to the lots you make.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 16, 2026 · 5 min read

Section 90(1)(d) of the Safe Food for Canadians Regulations asks you to record "the name of any food commodity" you put into a food or made it from. You also record who supplied it, their address and the date you received it. That's ingredient traceability, as the regulation writes it. What it doesn't ask for is the supplier's lot code, or which delivery went into which of your lots. Those are what let a supplier's recall stop at the lots it reached, instead of everything you made since the delivery.

The short version

  • The regulation asks for each ingredient's name, supplier, supplier's address and delivery date.
  • It doesn't ask for the supplier's lot, or which of your lots each delivery went into.
  • Record both anyway. Without them, a supplier's recall reaches every lot you made since the delivery.
  • The CFIA's inspector follows one ingredient through to the package, on the floor.
  • TaroStack records which ingredient lots went into each batch as you finish it. More at the end.

This is general information, not legal advice. Your CFIA inspector has the last word on what applies to you.

What section 90(1)(d) says

The full paragraph asks for "the name of any food commodity that they incorporated into the food or from which they derived the food and, if they were provided the food commodity by another person, the name and address of that person and the date on which it was provided."

So for every ingredient, you record:

What Example
The food commodity's name Red jalapeño peppers
Who provided it The pepper farm
Their address The farm's address
The date you received it August 18, 2026

That's the one step back for ingredients. Section 90(1)(c) does the same for food you receive and sell on unchanged.

What it leaves out, and why it matters

Section 90(1)(a) gives your own food a lot code. Section 90(1)(d) gives your ingredients a supplier and a date. Nothing in section 90 links the two: which delivery went into which of your lots.

The CFIA's inspection procedure tests that link anyway. The inspector picks at least one ingredient or work in progress and confirms its identity is kept through to the final package, pre-mixes and rework included. A record of names and dates can't show that. A batch record that lists the ingredient lots can.

A hot sauce maker, worked through

A six-person hot sauce maker in British Columbia ships to grocers in Alberta and Ontario. In August it receives three deliveries of jalapeños from one farm (lots JP-0811, JP-0818, JP-0825) and two of vinegar from one supplier (lots V-2207 and V-2231). It makes 14 batches.

In October the vinegar supplier recalls lot V-2207.

With only section 90(1)(d)'s records, the sauce maker knows it got vinegar from that supplier on August 4 and August 21. It doesn't know which batches used which delivery, so every batch made from August 4 to the end of the vinegar is in scope. That's 14 batches, and every customer who got any of them.

With batch records that list each ingredient lot, the answer is smaller. V-2207 went into batches 1 to 6. The rest used V-2231. Six lots, and only the customers who received those six.

  1. Record the supplier's lot on every delivery. If the case has none, write your own code (the delivery date and the supplier's invoice number works) on the case and in the record.
  2. On every batch, record which lot of each ingredient you used, and how much.
  3. If two lots are mixed in a bin, tank or silo, record both as inputs until it's run empty.
  4. Give anything you make ahead (a pepper mash, a spice blend, a dough) its own lot, and record that lot when it goes into the next batch.
  5. Treat rework as an ingredient: yesterday's lot, going into today's.

Steps 3 to 5 are the easy ones to miss, because they have no paperwork of their own. Tracking ingredients by lot has more on each, and the bakery version covers flour silos and dough.

Where this stops working

The batch record is the one written at the busiest moment, by the person with their hands in the food. On paper it can easily say "vinegar" and not "vinegar, lot V-2207". The delivery records have an invoice behind them, the batch record doesn't, so the step back can be complete while the link to your lots is missing.

How TaroStack does it

TaroStack records the link as a side effect of finishing a batch.

Receiving records the supplier's lot, typed or scanned from a GS1-128 case label, with the supplier and the date. When you finish a batch, TaroStack takes each ingredient from the lot that expires first and writes down which lots it used and how much. You change a line only when you used a different lot. A mash or blend made as its own batch gets its own lot, and the batch that uses it records that lot like any other ingredient.

Then a supplier's lot opens a trace: every batch it went into, every lot of yours that came out, what's still on your shelves, and every customer who received any of it.

The trace report carries each supplier's name and address and every delivery of the lot with its own date, which is section 90(1)(d) in full.

Paper TaroStack
Supplier, address, date On the invoice Recorded at receiving
The supplier's lot If someone wrote it down Typed or scanned at receiving
Which batch used which lot The batch sheet, when it says Recorded when the batch is finished
A supplier's recall Every batch since the delivery Only the batches the lot reached

Lots, recalls and recording batches against recipes are on every TaroStack plan, from $9.99 a month. It's free for 14 days. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

What is a food commodity under the SFCR?

In section 90(1)(d) it means each ingredient you put into a food or made it from. The regulation asks for its name, its supplier's name and address, and the date you received it.

Do I have to record ingredient lot codes in Canada?

Section 90 doesn't require the supplier's lot code. Without it, though, a supplier's recall can't be narrowed, and the CFIA's inspector checks that an ingredient's identity is kept through to the package.

How do I trace an ingredient to the finished product?

Record the supplier's lot at receiving and the lots each batch used. Then the trace from any supplier lot is a lookup: the batches it reached, and the customers who got them. The SFCR's traceability requirements cover the rest of section 90.

Sources

  1. Safe Food for Canadians Regulations, SOR/2018-108, Part 5 Traceability (s.90 to 92), current to 2026-10-29 · read November 16, 2026
  2. CFIA operational procedure: Food preventive control and traceability inspection, System Verification (Element 7) · read November 16, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.