Skip to content

PTI Label Example: What Goes on a Produce Case Label

A PTI label example, field by field: the GS1-128 barcode with GTIN and lot, the date, the voice pick code, and the lines a person reads. With a data sheet.

By Koa Sterling. Product specialist at TaroStack and small business owner. Yes, I am a real human, and I actually sit in front of a computer and write these articles. Reviewed November 21, 2026 · 7 min read

A PTI label is the case label the produce industry agreed on through the Produce Traceability Initiative. Every case carries a GS1-128 barcode holding two things, the packer's GTIN for that item and the lot, with the same two printed underneath in plain digits. Around the barcode are lines a person reads: what's in the case, its size, where it was grown, who packed it, and a date. In the corner is a four-digit voice pick code that warehouse pickers read aloud. It's a voluntary standard, and large buyers ask for it. Below is an example for a made-up farm's case of bell peppers, field by field, how the voice pick code is worked out, and a data sheet.

The short version

  • The barcode holds the GTIN after (01) and the lot after (10).
  • A date goes in the barcode too, after (13) or (15), when a lot runs past one day.
  • The lot is yours to design. Keep it to one day's pack from one place.
  • The voice pick code is four digits worked out from GTIN, lot and date.
  • The GTIN is built on a company prefix from GS1.
  • TaroStack reads a GS1-128 case label's lot when you receive. More below.

The example label

A made-up packer, Kaimana Farms, and a 25 lb carton of green bell peppers packed on November 16, 2026.

Field In the example What to know
GTIN (01) 10850510002011 14 digits: whose product, which item, which case size
Lot (10) KF1116A Letters and numbers, up to 20. Capitals matter
Date in the barcode (13) 261116 Year, month, day. (13) is a pack date, (15) a best before date
Date in words Pack date NOV 16 2026 Harvest, pack or best if used by
Voice pick code 6357, with 57 printed large Lower right, black digits in a white box
Name or variety Green bell peppers The largest text
Size or packaging Large, 25 lb carton
Grown in Hawaii, USA State or province and country
Grade U.S. No. 1 Only if a grade is required
Responsible party Kaimana Farms, Waimea, HI Who answers for the case
PLU or UPC PLU 4065 PLU for loose items, UPC for prepacks

The GTIN here is the one PTI's own guide uses in its examples. Yours is different. The layout, with type sizes for each line, is in PTI's harmonized case label, version 2.0 of November 2024.

The barcode

A GS1-128 barcode is a string of fields, each announced by a number in brackets called an application identifier.

Identifier Holds Format
(01) GTIN 14 digits
(10) Batch or lot Letters and numbers, up to 20
(13) Pack date 6 digits, YYMMDD
(15) Best before date 6 digits, YYMMDD

PTI's formatting guide says the only things that must be in the barcode are the GTIN and the lot. A date is added when a packer lets one lot run across a date boundary. PTI recommends not doing that: a lot that stays inside one day, from one packing place, keeps a recall small.

The GTIN isn't something you make up. It's built from a company prefix you license from GS1, plus a number you assign to each item and case size: large peppers in a 25 lb carton get one GTIN, the same peppers in an 11 lb carton get another. That side is in GS1 barcodes for small food producers.

The lot

The lot is the part you design, and it decides how much you'd have to pull back.

Pack date Lot Cases Block Voice pick code Shipped to
Nov 16 KF1116A 120 Block 4 6357 Two customers
Nov 16 KF1116B 64 Block 7 6374 One customer
Nov 17 KF1117A 150 Block 4 7381 Three customers
Nov 18 KF1118A 96 Block 2 4789 One customer

This farm's lot is its initials, the month and day, and a letter for the block. Two blocks were picked on November 16, so there are two lots that day. If something is ever wrong with block 7, the 64 cases of KF1116B are in question and the other 366 are not. Building a code is covered in how to create lot numbers, and what a lot code has to do in traceability lot code.

The voice pick code

In a big warehouse, pickers wear headsets. The system tells them a slot, and they read back digits from the case to prove they took the right one. Those are the voice pick code: four digits, the last two printed large.

PTI's guide gives the method. Join the 14-digit GTIN, the lot, and the date if there is one, with no brackets or spaces. Run that text through a standard checksum (CRC-16). Take the last four digits of the result.

PTI's own example
GTIN 10850510002011
Lot 46587443HG234
Text 1085051000201146587443HG234
CRC-16 result 26359
Voice pick code 6359: 59 large, 63 small

You don't do this by hand. PTI has a calculator on its resources page, and label software that prints PTI labels works it out. Two things to know: every lot has its own code, so the label changes each time the lot does, and capitals count, so KF1116A and kf1116a give different codes.

Do you need one?

PTI is an industry program, not a law. A farm selling at its own stand doesn't need it. A farm selling to a grocery chain or a distributor may be asked for it on the vendor form. PTI says its harmonized label meets both buyer and regulatory requirements. The regulation it has in mind is FDA's food traceability rule. FDA has proposed moving the compliance date to July 20, 2028, and Congress directed it not to enforce the rule before then; FDA says it will comply. More on that in FSMA 204 compliance date. This is general information, not legal advice.

Get the data sheet

Download the PTI case label data sheet. Two sheets and a read-me: the label's fields with the example, and a list of lots packed with what goes in each barcode. It holds the data for a label. It doesn't draw the barcode: label software does that. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.

Where this stops working

The label is the easy half. The hard half is on the last column of the table: where each lot went. A buyer calls about KF1116B. The label printer has no idea which trucks those 64 cases left on, and the answer is in three invoices that don't mention lots.

How TaroStack does it

TaroStack keeps the lot from the field to the customer.

Each day's pack is a lot with your own code and its dates.

What ships is recorded by lot, and one report lists which customers got a lot and what's still in the cooler. Starting a recall holds what's left.

If you're the one receiving cases, scanning a supplier's GS1-128 case label fills in its lot.

Counting works on a phone with no signal, in the packing shed or the cooler.

The job Labels and invoices In TaroStack
Which customers got KF1116B Read the invoices One report
What's left of it Walk the cooler Stock by lot
Receiving a labeled case Type the lot Scan it
Stop it shipping A note on the pallet On hold

TaroStack's own lot labels carry a GS1-128 barcode, but they aren't laid out as PTI case labels and have no voice pick code: print those from label software, with the lot from TaroStack. It doesn't issue GTINs. Lots and recalls are on every plan, from $9.99 a month. The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.

Questions people also ask

What is on a PTI label?

A GS1-128 barcode with the GTIN and lot, the same in readable digits, a date, a four-digit voice pick code, and text for the item, its size, where it was grown, the grade if required and the responsible party.

How is a voice pick code calculated?

From the GTIN, the lot and the date if there is one, joined as text and run through a CRC-16 checksum. The last four digits of the result are the code. PTI publishes the method and a calculator.

Is a PTI label required?

It's a voluntary industry standard, not a law. Large buyers often ask their produce suppliers for it.

Sources

  1. Produce Traceability Initiative, Harmonized Traceability Case Label and data elements, v2.0, November 2024 · read November 21, 2026
  2. Produce Traceability Initiative, Best Practices for Formatting Case Labels (application identifiers 01, 10, 13 and 15; the voice pick code and its CRC-16 computation, with a worked example) · read November 21, 2026
  3. FDA, FSMA Final Rule on Requirements for Additional Traceability Records for Certain Foods: compliance date (page current as of 11/04/2026) · read November 21, 2026

We use AI to help with the research for these articles. Every one is read, checked against its sources and edited by Koa before it's published. Spot a mistake? Tell us and we'll fix it and say so. How we write these.

Let’s get your stack in order.

Get TaroStack

Sign up now for your free 14 day trial. No credit card required.