Packaging touches the food for longer than anything else does, and it's often the supplier a small maker has asked the least about. A packaging supplier questionnaire is the form you send before the first order of jars, lids, pouches, film, labels or cases. It asks what the item is made of, whether it's suitable for contact with your food under your conditions, whether allergens are in it or near it, how each production lot is marked, whether you'll be told before anything changes, and the ordinary questions of minimums and lead times. And it asks for the document behind each answer. A filled-in form proves only what the supplier says, but it gets the statements into your file with a name and a date on them. Below are the 16 questions, how to read what comes back, and the file.
The short version
- Send it before the first order, and again when the item or the site changes.
- Ask what every layer is made of: inks, adhesives and coatings too.
- Ask for a signed statement that names your item and your conditions of use.
- Ask how each lot is marked on the case, and write that code down at receiving.
- Ask to be told before a change, in writing.
- Tick each document as it arrives. An answer without its document is half an answer.
- TaroStack receives packaging by supplier lot and keeps it with the batches that used it. More below.
The questions
| Section | Question | Document to ask for |
|---|---|---|
| The supplier | Legal name, address of the site that makes this packaging, and a contact for quality | |
| The supplier | Do you make it, or buy it and sell it on? If you buy it, from whom? | |
| The item | Exact item, material and size, with your item number | Specification sheet with drawing |
| The item | What is it made of, layer by layer, including inks, adhesives and coatings? | Specification sheet |
| Food contact | Is every material that touches the food suitable for contact with my kind of food, at my filling and storage temperatures? | A signed statement that names the item and the conditions of use |
| Food contact | Does it contain recycled material? From what source, and is it in the food-contact layer? | Statement on recycled content |
| Allergens | Are any allergens used in the material, or handled on the same line or site? | Allergen statement |
| Quality | Is the site certified to a packaging or food safety standard? Which, and when was the last audit? | Current certificate |
| Quality | What do you check on each production lot: dimensions, seal, print, weight? | Certificate of conformance with each delivery |
| Traceability | How is each production lot marked on the case or pallet, and how long do you keep its records? | Example case label |
| Traceability | If you found a fault after shipping, how and how fast would you tell me? | Recall or notification procedure |
| Changes | Will you tell me before changing a material, a supplier of yours, or the site? | Change notification agreement |
| Supply | Minimum order, lead time, and price breaks | Quote |
| Supply | How should it be stored, and how long does it keep before use? | Storage and shelf life statement |
| Fit | Has it been run on a filler or sealer like mine? At what settings? | Samples for a trial |
| Sign-off | Name, title, signature and date of the person answering |
Reading what comes back
"Do you make it?" A distributor can be a good supplier. But then the answers about materials and lots come from a factory you haven't named yet. Ask for the maker, and for the maker's documents.
The food-contact statement. Read what it actually names. A statement that says a company's products are "suitable for food use" in general is weaker than one that names your item number, your kind of food and your temperatures. A lid that's fine on a cold-filled jar hasn't been said to be fine at a hot fill. The rules behind the statement are in food contact packaging regulations.
Allergens. It sounds like a question for ingredients. Ask it anyway, and file the answer beside your ingredient suppliers' in the allergen matrix template.
Lot marking. The answer you want is a code on every case that you can copy at receiving. Without it, a supplier's notice about "lids made in March" can't be matched to anything on your shelf: see lot number on food packaging.
Changes. This is the question that pays for the form. A new liner, a new ink or a new factory can each undo a statement you're relying on, and the supplier may see none of them as worth mentioning. Get the promise in writing, and send the questionnaire again when it's used.
A blank. A supplier who leaves a question empty has told you something. Ask once more, and decide.
Where it sits
The questionnaire is one step in approving a supplier: see supplier approval program template and the list of who's approved for what in approved supplier list. The same form for ingredient suppliers is in supplier questionnaire template. What should arrive with each delivery is in certificate of conformance template.
A customer or a certification scheme may have its own requirements for packaging suppliers. Theirs come first: add their questions to this list.
Get the questionnaire
Download the packaging supplier questionnaire. One sheet and a read-me: the 16 questions by section, a column for the supplier's answer, the document to ask for, and a tick for when it arrives. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
The form sits in a folder, and the lids sit on a shelf. The link between them is the lot code on the case, and that's the thing a spreadsheet of packaging stock doesn't hold. When the supplier writes about one production lot, the folder has the statement and the shelf has four cases, and nothing says whether those cases are that lot or which jars of sauce went out under those lids.
How TaroStack does it
TaroStack receives packaging the way it receives ingredients: by lot.
Receiving records each delivery as a lot, with the supplier's code, at what you paid.
A batch takes its packaging off stock by lot, and notes which lots it used, automatically.
One report for a lot: from a case of lids to the batches that used them, the customers who got those batches, and what's left.
Starting a recall holds what's still in stock.
A reorder list in days of cover, with each supplier's lead time and minimum.
| The supplier's notice | Folder and shelf | In TaroStack |
|---|---|---|
| Do we have that lot of lids | Read the cases | Search the lot |
| Which batches used them | Unknown | One report |
| Which customers got those batches | Read the invoices | The same report |
| Lids on hand for next week | Count | Stock on hand |
TaroStack doesn't send questionnaires or approve suppliers. Lots, batches and recalls are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
