Mushroom growers measure yield with one ratio, biological efficiency: the weight of fresh mushrooms a batch gave, divided by the dry weight of the substrate it grew on. A research paper on oyster mushrooms states it as BE (%) = weight of fresh fruiting bodies ÷ weight of dry substrate × 100. The dry weight is the point. Substrate is mostly water, and two growers who hydrate differently can't compare pounds from a block. Divide by dry substrate and they can. A BE of 100% means a pound of fresh mushrooms from every pound of dry substrate. The number does two jobs for a business: it says how much substrate to make for an order, and it shows at once when a batch underperformed. Below is the sum, four batches from a made-up grower, what a bad batch tells you, and a calculator.
The short version
- Dry substrate = wet substrate × (1 − moisture).
- Biological efficiency = total fresh mushrooms ÷ dry substrate.
- Weigh every flush, not just the total.
- Compare batches by BE, not by pounds.
- To plan: pounds wanted ÷ BE = dry substrate to make.
- Write the spawn lot and substrate batch beside every result.
- TaroStack records each batch's inputs and harvests by lot. More below.
Four batches
| Batch | Wet substrate | Moisture | Dry substrate | Flush 1 | Flush 2 | Flush 3 | Total | BE |
|---|---|---|---|---|---|---|---|---|
| OY-1101, oyster, 10 blocks | 50 lb | 62% | 19.0 lb | 11.5 | 5.0 | 2.0 | 18.5 lb | 97% |
| OY-1108, oyster, 10 blocks | 50 lb | 62% | 19.0 lb | 6.0 | 3.5 | 0 | 9.5 lb | 50% |
| SH-1015, shiitake, 10 blocks | 55 lb | 58% | 23.1 lb | 9.0 | 6.5 | 3.0 | 18.5 lb | 80% |
| LM-1104, lion's mane, 6 blocks | 30 lb | 60% | 12.0 lb | 6.5 | 2.5 | 0 | 9.0 lb | 75% |
Every figure is this grower's own, for its recipe, room and strains. They aren't targets.
The sum, for OY-1101. Fifty pounds of wet substrate at 62% moisture is 50 × 0.38 = 19.0 lb dry. Three flushes gave 18.5 lb. BE = 18.5 ÷ 19.0 = 97%.
Measuring moisture. Weigh a sample of mixed substrate, dry it completely in a low oven, and weigh it again. The weight lost, divided by the first weight, is the moisture. Do it for each recipe, and again when the sawdust or the supplements change.
What the bad batch says
OY-1108 used the same recipe as OY-1101, a week later, and gave half. The total alone, nine and a half pounds, says "poor batch". The flushes say more: the first flush was already low, 6.0 lb against 11.5, and the note records green mold on four blocks, pulled after it.
So two things went wrong, and they point in different directions. A low first flush on all ten blocks points at the start: spawn, or colonization. Mold on four points at contamination: sterilization, or the inoculation bench. A grower with only totals can't separate them. With flush weights, the spawn lot and the sterilizer run written beside each batch, the next step is to look at what else that spawn lot and that run produced.
It also has a price. At this grower's $12.00 a pound wholesale, the 9.0 lb that OY-1108 fell short of its twin is $108.00, from one batch.
Planning from BE
A restaurant wants 15 lb of oyster mushrooms a week. This grower's oyster batches, leaving out the contaminated one, run near 97%, and it plans on 80% to be safe.
- Dry substrate a week = 15 ÷ 0.80 = 18.75 lb.
- Wet substrate at 62% moisture = 18.75 ÷ 0.38 = 49.3 lb, which is ten of its 5 lb blocks.
- Those ten blocks are made the number of weeks ahead that the strain takes to colonize and fruit in its room, which its own log gives.
In OY-1101, 62% of the total came in the first flush. This grower plans deliveries on first flushes and treats later ones as extra.
A food safety plan for a grower is in HACCP plan for mushrooms, stock in mushroom inventory spreadsheet, and the business in mushroom farm business plan.
Get the calculator
Download the mushroom yield calculator. One sheet and a read-me: type the wet substrate, its moisture and each flush, and it works out dry substrate, the total, the biological efficiency and the fresh pounds from a wet pound. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
The sheet holds the result. The cause is somewhere else: which spawn lot, which bag of supplement, which sterilizer run, which day. Forty batches a month across three species, and the question "what do the bad ones have in common?" means reading four notebooks side by side.
How TaroStack does it
TaroStack keeps the inputs and the harvests on one record.
Receiving records each lot of spawn, sawdust and supplement, with the supplier's own lot number.
Each batch of blocks is a batch record. It takes its inputs off stock by lot and notes which lots it used, automatically.
Your checks are fields on the batch record: moisture, the sterilizer run, each flush's weight.
Each harvest is a lot with a date, and what ships is recorded by lot.
One report for a lot: every batch that used a spawn lot, and what each gave.
| The question | Four notebooks | In TaroStack |
|---|---|---|
| Which batches used that spawn lot | Read them all | One report |
| What each flush gave | The harvest log | Fields on the batch |
| What the batch cost | An estimate | From the lots it used |
| Who got Tuesday's oysters | Invoices | The lot on the delivery |
TaroStack doesn't weigh a harvest or measure moisture. Recipes, batches and lots are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
