A glaze recipe is a list of dry materials that adds to 100. To make a batch, multiply the batch weight by each material's percent: in a 5,000 g batch, feldspar at 40 is 2,000 g. Colorants and other additions are written on top of the 100, so 4% iron oxide in that batch is another 200 g, and the bucket ends up with more than 5,000 g of dry material in it. Water isn't part of the recipe at all. Below is a recipe at four sizes, what to do with one that doesn't add to 100, and an Excel file that does the sums and checks the total.
The short version
- Grams of each material = base batch weight × its percent.
- The base adds to 100. Additions are a percent of the base, on top.
- A recipe that doesn't add to 100 can be recalculated so it does.
- Water is added after, to a specific gravity you write down.
- Label the bucket with the recipe, the date and the bags the materials came from.
- TaroStack keeps the recipe, records each batch, and knows what's left in every bag. More below.
A recipe, as percent and as grams
The example is the well-known 4-3-2-1 base, with iron oxide and bentonite added. Prices are a made-up studio's.
| Material | Percent | In a 5,000 g base | Cost |
|---|---|---|---|
| Potash feldspar | 40 | 2,000 g | $2.60 |
| Silica | 30 | 1,500 g | $1.50 |
| Whiting | 20 | 1,000 g | $0.80 |
| Kaolin (EPK) | 10 | 500 g | $0.60 |
| Base | 100 | 5,000 g | |
| Red iron oxide | + 4 | 200 g | $2.64 |
| Bentonite | + 2 | 100 g | $0.22 |
| Everything weighed out | 5,300 g | $8.36 |
The colorant is 4% of the weight and nearly a third of the cost. That's usual: oxides and stains are where a glaze's money goes.
Four sizes
| Base batch | Feldspar | Silica | Whiting | Kaolin | Iron oxide | Bentonite | Cost |
|---|---|---|---|---|---|---|---|
| 100 g (test cup) | 40 g | 30 g | 20 g | 10 g | 4 g | 2 g | $0.17 |
| 1,000 g | 400 g | 300 g | 200 g | 100 g | 40 g | 20 g | $1.67 |
| 5,000 g | 2,000 g | 1,500 g | 1,000 g | 500 g | 200 g | 100 g | $8.36 |
| 10,000 g | 4,000 g | 3,000 g | 2,000 g | 1,000 g | 400 g | 200 g | $16.72 |
A test cup needs a scale that reads to 0.1 g or finer: at 100 g, half a percent of cobalt is half a gram.
When a recipe doesn't add to 100
Old recipes and ones copied from a notebook often add to something else. Divide each line by the total and multiply by 100.
| Material | As written | ÷ 110 × 100 |
|---|---|---|
| Feldspar | 45 | 40.9 |
| Silica | 28 | 25.5 |
| Whiting | 22 | 20.0 |
| Kaolin | 15 | 13.6 |
| Total | 110 | 100.0 |
The glaze is the same; only the arithmetic changes. The sheet says so when the base isn't 100, so a missed line shows up before the materials are in the bucket.
Water, and what goes on the bucket
Water isn't in the recipe because it isn't a fixed amount. Add it until the glaze goes on the way you want, then measure its specific gravity: weigh exactly 100 mL and divide the grams by 100. Write that number on the recipe. Next time, add water until the glaze reaches it.
A 5,000 g base with its water fills about a third of a 5-gallon bucket.
| Write on the bucket | Why |
|---|---|
| Recipe name and version | Two buckets of white look the same |
| Date mixed | Glazes settle and change as they sit |
| Specific gravity | To bring it back after it thickens |
| Which bag of each material | A new bag of feldspar can fire differently from the last |
Dry glaze materials are dusty, and silica dust in particular is one to keep out of your lungs. Wear a respirator rated for fine dust when you weigh and mix, and wipe up with a wet sponge, not a broom.
Get the calculator
Download the glaze batch calculator. Type the base batch weight, the recipe's percents, and any additions under them. It shows the grams of each, says whether the base adds to 100, and totals the cost. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers. For recipes written as amounts, not percents, the recipe multiplier calculator does the same job. What glaze adds to the price of a pot is in how to price pottery, and the wider sums of a studio in pottery business plan.
Where this stops working
The calculator is right about the 2,000 g of feldspar. It doesn't know the bag has 1,400 g left. And when a kiln load comes out with pinholes, the question is which bucket, mixed when, from which bags, and the calculator has no memory of any of it.
How TaroStack does it
TaroStack keeps the recipe, the bags and the buckets in one record.
Each glaze is a recipe by weight, with versions. Change the iron from 4 to 5 and it's a new version, with the old one kept.
The recipe scales to the batch. Record a 5,000 g batch or a 10,000 g one and the amounts follow. Units convert, so feldspar bought by the 50 lb bag and weighed by the gram is one item.
Recording the batch notes the bags. Each delivery is a lot. The lots used go onto the batch record automatically, and the bucket gets a lot code of its own.
Your own fields. Specific gravity, test-tile result and initials go on the batch-record form.
A reorder list. Materials below their reorder point are listed, with days of cover.
| The job | Calculator and masking tape | In TaroStack |
|---|---|---|
| Grams for this bucket | Type the batch | The recipe, scaled to the batch |
| Enough feldspar? | Lift the bag | Stock on hand, by lot |
| Which bags went into this bucket | On the tape, if written | On the batch record |
| What a bucket cost | Prices you typed | What the materials really cost |
Recipes, batches, lots and the reorder list are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
