Batching a cocktail is three sums. Multiply each ingredient by the number of drinks. Add water, because a drink that's stirred or shaken with ice picks up water as it chills, and a batch that goes straight from the fridge to the glass never meets that ice. Then divide the total by the bottle size to know how many bottles to fill, and by the pour to know what one serving is. For a stirred whiskey cocktail of 2 oz bourbon, 1 oz sweet vermouth and two dashes of bitters, forty drinks is 80 oz of bourbon, 40 oz of vermouth, 2.4 oz of bitters and 30 oz of water: 152 oz, six 750 ml bottles, poured at 3.8 oz each, with $2.83 of ingredients in every glass. Below are the sums, what not to batch, and a calculator.
The short version
- Multiply everything by the number of drinks.
- Add water for the dilution ice would have given. Measure your own figure once.
- Batch spirits, vermouths, liqueurs, syrups and bitters. Add juice, fizz and egg at service.
- Bitters and strong flavors: scale them a little short, taste, then top up.
- Chill the batch. Pour the diluted volume, not the original recipe's.
- TaroStack treats the batch as a recipe: it costs it and takes the bottles from stock. More below.
The example
| Ingredient | One drink | 40 drinks | Cost |
|---|---|---|---|
| Bourbon | 2 oz | 80.0 oz | $88.32 |
| Sweet vermouth | 1 oz | 40.0 oz | $18.92 |
| Aromatic bitters | 0.06 oz (2 dashes) | 2.4 oz | $6.00 |
| Water, for dilution | 0.75 oz | 30.0 oz | $0.00 |
| Total | 3.81 oz | 152.4 oz | $113.24 |
That fills six 750 ml bottles, at $18.87 of ingredients a bottle. Each bottle pours a little over six and a half drinks at 3.81 oz. Forty drinks cost $2.83 each.
What to buy. Eighty ounces of bourbon is 3.15 bottles of 750 ml, so four. Forty ounces of vermouth is 1.6 bottles, so two. The calculator works in ounces; the order is in bottles, rounded up.
At 100 drinks it's 200 oz of bourbon, 100 oz of vermouth, 6 oz of bitters and 75 oz of water: 381 oz, fifteen bottles, $283.10.
How much water
Ice does two things to a drink: it chills it and it waters it. The water is part of the recipe, even though nobody writes it down. A batch kept in the fridge or freezer and poured straight into a glass needs that water added.
The amount depends on the drink, the ice and the bartender, so measure it once for each cocktail:
- Build one drink in a mixing glass on a scale. Note the weight of the liquid.
- Add ice, and stir or shake the way you normally do.
- Strain into a glass on the scale. Note the weight.
- The difference is the water.
For this bar's stirred cocktail it came to 0.75 oz on a 3.06 oz recipe: about a fifth of the finished drink. A shaken drink picks up more than a stirred one. Use your own number, not this one, and write it on the recipe.
If the batch will be poured over ice and sit in the glass, add less water or none: the ice in the glass will do it.
What to batch, and what to add at service
| Batch ahead | Add at service |
|---|---|
| Spirits, vermouth, liqueurs | Citrus juice: it fades within hours |
| Syrups | Soda, tonic, sparkling wine: it goes flat |
| Bitters, scaled a little short | Egg white, cream |
| The dilution water | Garnishes; anything muddled |
So a spirit-forward stirred drink batches completely. A sour batches as spirit, liqueur and syrup, with fresh juice measured into the shaker at service. A highball batches as its base, topped in the glass.
Bitters don't scale in a straight line to most palates: forty times two dashes can taste stronger than one drink did. Add three-quarters of the calculated amount, stir, taste against a freshly made single drink, and adjust. The same goes for absinthe rinses, saline and anything smoky.
Dashes. A dash isn't a unit. This bar measured its bottle at about 0.03 oz a dash. Measure yours by counting dashes into a jigger.
Keeping and labeling
Label every bottle with the cocktail, the date it was mixed, and the pour size. A spirit-and-vermouth batch keeps longest cold: vermouth is wine, and it goes stale once opened. Anything with juice in it is for that day.
Check your state's rules before you batch drinks for sale. Rules on pre-mixed drinks, infusions and how long a mix may be kept differ from place to place, and your licence may have conditions of its own.
Pricing the drink
The ingredients are $2.83. A bar's price follows from the pour cost it aims for: at 20%, that's $14.15 before rounding. Batching doesn't change the cost of the liquid, but it changes the labor: a drink poured from a bottle takes seconds. The full costing of a drink, with garnish and glass, is in drink cost calculator. Scaling any recipe is in recipe multiplier calculator, and treating a batch as a component of other things in sub-recipe template. A card for the bar book is in standardized recipe template.
Get the calculator
Download the batch cocktail calculator. Type the number of drinks, the recipe for one, and what each ingredient costs an ounce. It works out each amount, the batch volume, the bottles it fills and the cost of a drink and a bottle. It's an ordinary Excel file with no macros, and it works in Google Sheets, LibreOffice and Numbers.
Where this stops working
The calculator knows the recipe. It doesn't know the back bar. Saturday's batch needs four bottles of bourbon; there are three and a half on the shelf, and two of those are spoken for by the regular menu. Nobody finds out until Friday night, when the distributor is closed. And after the event, was the cost really $2.83, or did the last bottle get free-poured?
How TaroStack does it
TaroStack treats the batch as a recipe with stock behind it.
The batch is a recipe. Bourbon, vermouth, bitters and water for one bottle. Record six bottles made and each ingredient comes off stock by exactly that, in ounces from bottles bought by the case.
"What could I make right now" says how many bottles of the batch the back bar covers and which ingredient stops you: the bourbon.
The cost is real. Each batch is costed from what the bottles actually cost you, so a price rise shows up in the drink.
The batch is stock too. Six bottles of the mix, with the date made, counted like anything else. Count before and after the event and you know what was poured.
A reorder list in days of cover, so the bourbon is ordered on Tuesday.
| The job | Calculator | In TaroStack |
|---|---|---|
| Scale the recipe | Yes | The recipe, at any size |
| Is there enough bourbon | Go and look | What could I make right now |
| What the batch really cost | At the price you typed | At what the bottles cost |
| What was poured | A guess | A count before and after |
TaroStack doesn't check your licence or measure your dilution. Recipes, batches, stock and counting are on every plan, from $9.99 a month (5 recipes) or $39 a month (50 recipes). The first 14 days are free, with no credit card. If you'd like a hand setting up, ask, and we'll do it with you.
